Mettler Toledo HG63 Operating instructions

Brand: Mettler Toledo

Model: HG63

Category: Measuring, testing & control

Type: Operating instructions

This manual is also suitable for

HG63 For moisture analyzer HG63

Short-form operating instructions

HG63 Moisture Analyzer

For detailled information see operating instructions

Technische Änderungen und Änderungen im

Lieferumfang des Zubehörs vorbehalten.

Alphanumeric entries

0...9

Select method:

Select method

Method

Numeric entries

or:

Enter drying temperature

(standard and rapid drying)

Enter drying time

‹30

⁄00

Heating module adjustment

∑CAˆ NO

†CAˆ NO

†CAˆ YES

Read off 1st temperature on temperature ad-

justment set and enter:

†CAˆ 102

Read off 2nd temperature on temperature

adjustment set and enter:

Balance adjustments

∑CAˆ NO

∑CAˆ YES

Moisture determination (chronological sequence of the measurement cycle and status display “User Guide”)

1 234567

Standby mode Load pan Tare Weigh in Start Drying

Read result

Swtich on

On/Off

wait

Reset

wait ....

ENﬂ [37

Return to standby mode

at any time with «Reset»

†CAˆ 158

Mettler-Toledo GmbH, Laboratory & Weighing Technologies, CH-8606 Greifensee, Switzerland

Phone +41-1-944 22 11, Fax +41-1-944 30 60, Internet: http://www.mt.com

P11780547

Start

0...9

Start

Code

∑CAˆ

5≠000

∑CAˆ

≠000

Function keys

Selection of the switch-off criterion

Automatic switch-off

1: Quick drying sample

5: Slow drying sample

Manual switch-off with

the «Stop» key

Free switch-off one free switch-

off criterion for each method

Timed switch-off

Test measurement

with record printout

Selection of the display mode

Moisture content

Current sample

weight in grams

Dry content

ATRO moisture content

ATRO dry content

Selection of the drying program

Standard drying

Rapid drying

MARGARINE

125

130

125

Cause: No stability during taring or adjustment

Remedy: Seek stable surroundings/optimum location/Take care that no part

of the sample or the sample pan touch the draft shield element or the

sample pan holder

Cause: No or wrong adjustment weight loaded

Remedy: Load correct adjustment weight

Cause: Loaded sample weight too low

Remedy: Weigh in sample with minimum weight (100 mg)

Cause: Sample vessel has not been tared

Remedy: Tare sample vessel

Cause: Upper/lower limit of admissible input range violated

Remedy: Enter value in admissible range

Cause: Keypad has been locked in menu, printer deactivated in menu

Remedy: Cancel keypad locking, activate printer in menu

Cause: The selected switch-off criterion does not permit a time entry

Remedy: Select switch-off criterion “Timed switch-off”

Cause: Time limit for value entry in heating module adjustment exceeded

(10 minutes)

Remedy: Repeat heating module adjustment and enter value in good time

Cause: Undefined condition

Remedy: Press «Reset» or switch instrument off then on again with «On/Off»

key.

Cause: Sample chamber has not cooled down sufficiently

Remedy: Allow the instrument to cool down to the starting temperature

Important: You must acknowledge the error messages with the «Reset» key before you can continue working with the

instrument. Consult the operating instructions of your instrument for information on other error messages.

A Record title

B Manufacturer and Designation of the

instrument

C Type of the instrument

D Serial number of the instrument

E Version number of the software

F Selected method number

G Comment line

H Selected switch-off criterion

I Selected drying program

J Drying temperature (set temperature)

K Selected display mode

L Sample weight at start of drying

M Measured value at each print interval

N Total time of drying

O Dry weight of the sample in grams

P Final result in the selected display mode

Q Date and time at the end of the measu-

rement

Error messages

Menu overview

Record printout (example)

ERROÈ 1

ERROÈ 2

ERROÈ 3

ERROÈ 4

ERROÈ 5

ERROÈ 6

ERROÈ 7

ERROÈ 8

ERROÈ 9

ERROÈ 10

Method menu overview

Method

Selecting the setting within a menu item:

A -MOISTURE DETERMINATION-

B METTLER TOLEDO

Halogen MoistureAnalyzer

C Type: HG63

D SNR: 1234567890

E SW: 2.01

F Method:

G QUALITY CHECK

H Switchoff mode 2

I Gentle drying

J Drying temp. 105 °C

K Disp.mode 0...-100 %MC

L Start weight 2.507 g

001:00 min -2.51 %MC

002:00 min -3.39 %MC

003:00 min -3.71 %MC

N Total time 3:19 min

O Dry weight 2.412 g

P End result -3.79 %MC

Q ----30.06.03---15.14----

Reset

Quits the menu without saving the last menu

item you changed

Saves the menu item and skips to the next

menu item

Calls up the next menu item

Select settings

MET·

ONON

OFF

SYMBOˆ

ONON

OFF

PRINÎ

ONON

OFF

DEUTSCHDEUTSCH

DEUTSCH FRANCAIS

ITALIANO

ESPANOL

RUSSIAN

ENGLISH EU

ENGLISH US

Balance-Adjustment

and -Test

Heating module-Adjustment

and -Test

Reset to factory

settings

Clear method memory

clear completely

Enter current 1

time

Enter current 2

date

Set vibration 3

adapter

Set audio signal 5

Protect settings 6

Activate/deactivate 7

symbol display

Switch built-in 8

printer on/off

Activate/deactivate 9

method option

Functions

Settings

∑CAˆ

NONO

YES

TEST

†CAˆ

NONO

YES

TEST

FC†SEÎ

NONO

YES

Automatic/manual 4

sample champer

Select dialog

language

TIMË

1‹041‹04

1‹04

DAÎ

2{0“032{0“03

2{0“03

VIBRÅ

MEﬂMEﬂ

MEﬂ

HIGH

LOW

BEE∏

LOWLOW

LOW

HIGH

OFF

KE¥PROÎ

OFFOFF

OFF

▼

ABORT?ABORT?

ABORT?

SET?

µCLÈ

NONO

YES

▼

STARÎ

AUTøAUTø

AUTø

MA~

ABORT?ABORT?

ABORT?

CLEAR?

Free switch-off criterion

(= switch-off criterion F)

ƒSOé

NONO

YES

'W†M‚'W†M‚

'W†M‚

'SE© 100

Free factor -MC

(correction factor)

ƒƒ-Mé

NONO

YES ±000

POSPOS

POS

NEG

Free factor g

(calculated result)

ƒƒ‚

NONO

YES 10

(1-10 mg)

(5-180 sec)

(0.500-2.000)

(1-100)

Mettler Toledo HG63 Operating instructions

Brand: Mettler Toledo

Model: HG63

Category: Measuring, testing & control

Type: Operating instructions

This manual is also suitable for

HG63 For moisture analyzer HG63

Download PDF

report

Mettler Toledo HG63 Operating instructions

This manual is also suitable for

Mettler Toledo HG63 Operating instructions

Related papers

Other documents