Philips BDP7200/98 Quick start guide

Type
Quick start guide

This manual is also suitable for

Blu-ray Disc Player
Remote Control
and 2 batteries
User Manual
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
BDP7200
What’s in the box?
Connect
Set up
Enjoy
1
2
3
2008 C Philips Consumer Lifestyle
All rights reserved.
Printed in China
E5J13PD
1VMN26828 ÌÌÌÌÌ
Power cable
HDMI cable
(high speed)
RCA Audio/
Video cables
Troubleshooting
No reaction to the remote control.
Connect the product to the power outlet.
Point the remote control at the product.
Insert the batteries correctly.
Insert new batteries in the remote control.
Cannot play back a disc.
Make sure that the product supports the disc.
Make sure that the Blu-ray Disc player supports the region code of DVD or BD (BD: A, DVD: All or 3).
For DVD±RW/±R, make sure that the disc is finalised.
No video signal on the display device.
Turn on the TV.
Set the TV to the correct external input.
Select the correct video resolution using OUTPUT on the front panel.
Press and hold B on the front panel for 5 seconds to change the setting back to its default.
No 5.1-channel aduio from the loudspeakers of the audio system.
Does the disc contain 5.1-channel audio? The 5.1-channel audio is not available when the disc does not contain it.
Does the audio system support 5.1-channel audio? The 5.1-channel audio is not available when the audio system does
not contain it.
In the settings menu, set [HDMI Audio] to [Off].
Need help?
User Manual
See the user manual that came with your Philips Blu-ray disc player.
User Manual
in CD-ROM
User Manual
bdp7200_98_qsg_eng1.indd 1bdp7200_98_qsg_eng1.indd 1 10/10/2008 9:34:17 AM10/10/2008 9:34:17 AM
1
Option 3: Use Composite Video
(standard quality)
VIDEO
IN
AC IN
COMPONENT
VIDEO OUT
VIDEO
OUT
P
B
/C
B
P
R
/C
R
Y
5.1ch AUDIO OUT
AUDIO
OUT
FL SL C
L
R
FR SR SW
DIGITAL OUT
(
PCM/ BITSTREAM
)
COAXIAL OPTICAL
VIDEO
OUT
HDMI OUT
Connect the RCA video cable to the VIDEO OUT
socket on this unit and the composite video input
socket on your TV.
B
Connect audio
AUDIO IN
LR
COMPONENT
VIDEO OUT
VIDEO
OUT
P
B
/C
B
P
R
/C
R
Y
5.1ch AUDIO OUT
AUDIO
OUT
FL SL C
L
R
FR SR SW
HDMI OUT
AUDIO
OUT
L
R
Connect the RCA audio cable to the AUDIO OUT
(L/R) socket on this unit and the analogue audio input
socket on your TV.
C
Connect power cable
AC IN
After you made all the necessary connections,
connect the power cable from the AC cord to the
AC outlet.
Note Refer to the user manual for the possible
connections and important safety instructions.
2
Set up
Find the viewing channel
A Press 2 to turn on this unit.
B Turn on the TV. Use the TVs remote control to select
the correct viewing channel.
Note To search for the correct viewing channel, press
the Channel Down button on the TVs remote control
repeatedly (or AV, SELECT,
° button) until you see the
Video In channel.
If a certain amount of time has passed since you
turned on the unit, you may see the home menu
instead of the PHILIPS splash screen.
Disc Tray
Settings
Product info
Blu-ray Disc Player
Connect to TV
A
Option 1: Use HDMI (best quality)
COMPONENT
VIDEO OUT
VIDEO
OUT
P
B
/C
B
P
R
/C
R
Y
HDMI OUT
R
FR SR SW
DIGITAL OUT
(
PCM/ BITSTREAM
)
COAXIAL OPTICAL
*1
*2
If your TV supports HDMI, connect the HDMI cable
or HDMI-DVI cable (not supplied) to the HDMI OUT
socket on this unit and the HDMI or DVI input socket
on your TV.
Note
*1) This unit is compatible with the progressive scan
system. The feature provides you with higher quality
pictures than traditional output system does. To utilise
this feature, a component or an HDMI connection is
required.
*2) Analogue audio connection is not required for this
type of connection.
Option 2: Use Component Video
(better quality)
COMPONENT
VIDEO IN
Y
PB/CB
PR/CR
COMPONENT
VIDEO OUT
VIDEO
OUT
P
B
/C
B
P
R
/C
R
Y
COMPONENT
VIDEO OUT
P
B
/C
B
P
R
/C
R
HDMI OUT
Y
*1
Connect the component video cable (not supplied) to
the COMPONENT VIDEO OUT socket on this unit
and the component video input socket on your TV.
Connect
Start disc play
A Press OPEN/CLOSE Z to open the disc tray.
B Place the disc on the disc tray with its label side facing
up.
Make sure the disc is compatible with this unit.
BD-video
A
DVD-video
ALL
C Press OPEN/CLOSE Z to close the disc tray.
It may take a while to load the disc.
D Playback may start automatically. If not, press PLAY
B
.
To pause playback:
Press PAUSE X
.
To return to the normal playback:
Press PLAY B
.
To stop playback:
Press
STOP x.
3
Enjoy
or
STOP
PAUSE
bdp7200_98_qsg_eng1.indd 2bdp7200_98_qsg_eng1.indd 2 10/10/2008 9:34:18 AM10/10/2008 9:34:18 AM
  • Page 1 1
  • Page 2 2

Philips BDP7200/98 Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI