thomann StairVille DJ Lase RGB Pro Advanced 1000 User manual

Brand: thomann

Model: StairVille DJ Lase RGB Pro Advanced 1000

Category: Stroboscopes & disco lights

Type: User manual

This manual is also suitable for

DJ Lase RGB Pro Advanced 1000

DJ Lase RGB

Pro Advanced 1000

showlaser

user manual

Musikhaus Thomann

Thomann GmbH

Hans-Thomann-Straße 1

96138 Burgebrach

Germany

Telephone: +49 (0) 9546 9223-0

E-mail: [email protected]

Internet: www.thomann.de

28.03.2017, ID: 368582 (V3)

Table of contents

1 General notes............................................................................................................................................... 5

1.1 Further information........................................................................................................................... 6

1.2 Notational conventions.................................................................................................................... 7

1.3 Symbols and signal words............................................................................................................... 8

2 Safety instructions.................................................................................................................................. 10

3 Features....................................................................................................................................................... 17

4 Installation.................................................................................................................................................. 18

5 Starting up.................................................................................................................................................. 25

6 Connections and operating elements........................................................................................... 28

7 Operating.................................................................................................................................................... 35

7.1 Switching the device on / off....................................................................................................... 35

7.2 Main menu.......................................................................................................................................... 36

7.3 SYSTEM menu.................................................................................................................................... 37

7.4 Operating modes............................................................................................................................. 39

7.5 Setting DMX channel...................................................................................................................... 46

Table of contents

DJ Lase RGB Pro Advanced 1000

7.6 Functions in DMX mode................................................................................................................ 47

7.7 Operating via keyboard................................................................................................................. 55

7.8 Menu diagram................................................................................................................................... 62

7.9 Resetting to factory defaults........................................................................................................ 63

8 Technical specifications....................................................................................................................... 64

9 Plug and connection assignment.................................................................................................... 66

10 Troubleshooting...................................................................................................................................... 70

11 Cleaning....................................................................................................................................................... 73

12 Protecting the environment.............................................................................................................. 74

Table of contents

showlaser

1 General notes

This manual contains important instructions for the safe operation of the unit. Read and follow

the safety instructions and all other instructions. Keep the manual for future reference. Make

sure that it is available to all those using the device. If you sell the unit please make sure that

the buyer also receives this manual.

Our products are subject to a process of continuous development. Thus, they are subject to

change.

General notes

DJ Lase RGB Pro Advanced 1000

1.1 Further information

On our website (www.thomann.de) you will find lots of further information and details on the

following points:

Download This manual is also available as PDF file for you to download.

Keyword search

Use the search function in the electronic version to find the topics of

interest for you quickly.

Online guides

Our online guides provide detailed information on technical basics

and terms.

Personal consultation For personal consultation please contact our technical hotline.

Service

If you have any problems with the device the customer service will

gladly assist you.

General notes

showlaser

1.2 Notational conventions

This manual uses the following notational conventions:

The letterings for connectors and controls are marked by square brackets and italics.

Examples: [VOLUME] control, [Mono] button.

Texts and values displayed on the device are marked by quotation marks and italics.

Examples: ‘24ch’, ‘OFF’.

References to other locations in this manual are identified by an arrow and the specified page

number. In the electronic version of the manual, you can click the cross-reference to jump to

the specified location.

Example: See

‘Cross-references’ on page 7.

Letterings

Displays

Cross-references

General notes

DJ Lase RGB Pro Advanced 1000

1.3 Symbols and signal words

In this section you will find an overview of the meaning of symbols and signal words that are

used in this manual.

Signal word Meaning

DANGER! This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or

serious injury if it is not avoided.

WARNING! This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in death or serious

injury if it is not avoided.

NOTICE! This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and

environmental damage if it is not avoided.

General notes

showlaser

Warning signs Type of danger

Warning – high-voltage.

Warning – laser radiation.

Warning – suspended load.

Warning – danger zone.

General notes

DJ Lase RGB Pro Advanced 1000

2 Safety instructions

This device is intended to be used for the projection of laser light effects. It has been designed

exclusively for show applications. Use the device only as described in this user manual. Any

other use or use under other operating conditions is considered to be improper and may result

in personal injury or property damage. No liability will be assumed for damages resulting from

improper use.

This device may be used only by persons with sufficient physical, sensorial, and intellectual

abilities and having corresponding knowledge and experience. Other persons may use this

device only if they are supervised or instructed by a person who is responsible for their safety.

Intended use

Safety instructions

showlaser

Laser safety requirements are based on DIN EN 60825-1:2015. The corresponding accident pre‐

vention regulation of the Accident Prevention and Insurance Association in Germany is BGV-

B2.

This device contains a class-4 laser. It comes equipped with a safety key and a jack for con‐

necting an external safety switch. Always remove the key when the device is not attended by a

trained operator.

As an operator you are responsible for the safety of all persons present. Familiarize yourself

with the laser safety regulations that apply in your country. To ensure safe operation, it is

important to pay attention to the following instructions.

Prior to commissioning, the company/operator must appoint a qualified person as laser pro‐

tection officer in writing and notify the operation of the laser equipment to the Accident Pre‐

vention and Insurance Association and to the authority responsible for occupational safety. In

the event of public use, the complete laser equipment must be approved by an expert (e. g.

the Technical Control Board TÜV) prior to commissioning.

Laser safety basics

Safety instructions

DJ Lase RGB Pro Advanced 1000

DANGER!

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not

within reach of babies and young children. Choking hazard!

Ensure that children do not detach any small parts (e.g. knobs or the like) from

the unit. They could swallow the pieces and choke!

Never let children unattended use electrical devices.

DANGER!

Electric shock caused by high voltages inside

Within the device there are areas where high voltages may be present. Never

remove any covers.

There are no user-serviceable parts inside.

Do not use the device if covers, protectors or optical components are missing or

damaged.

Safety

Safety instructions

showlaser

DANGER!

Electric shock caused by short-circuit

Always use proper ready-made insulated mains cabling (power cord) with a pro‐

tective contact plug. Do not modify the mains cable or the plug. Failure to do so

could result in electric shock/death or fire. If in doubt, seek advice from a regis‐

tered electrician.

DANGER!

Laser radiation – avoid exposure to beam

The device contains a class-4 laser, classified according to EN 60825-1:2015. Do

not look into the laser beam. The laser beam can injure your eyes when you

directly look into it. Do not expose yourself to the laser beam. The laser beam can

cause skin burns.

In this context take extreme care when using converging optical instruments.

Safety instructions

DJ Lase RGB Pro Advanced 1000

WARNING!

Eye damage caused by high light intensity

Never look directly into the light source.

WARNING!

Risk of epileptic shock

Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons

should avoid looking at strobe lights.

NOTICE!

Laser radiation – risk of fire

Keep the area exposed to laser radiation free from flammable substances.

Safety instructions

showlaser

NOTICE!

Risk of fire

Do not block areas of ventilation. Do not install the device near any direct heat

source. Keep the device away from naked flames.

NOTICE!

Operating conditions

This device has been designed for indoor use only. To prevent damage, never

expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and

strong vibrations.

Safety instructions

DJ Lase RGB Pro Advanced 1000

NOTICE!

Power supply

Before connecting the device, ensure that the input voltage (AC outlet) matches

the voltage rating of the device and that the AC outlet is protected by a residual

current circuit breaker. Failure to do so could result in damage to the device and

possibly injure the user.

Unplug the device before electrical storms occur and when it is unused for long

periods of time to reduce the risk of electric shock or fire.

NOTICE!

Possible staining

The plasticiser contained in the rubber feet of this product may possibly react

with the coating of your parquet, linoleum, laminate or PVC floor and after some

time cause permanent dark stains.

In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad

floor protectors or a carpet.

Safety instructions

showlaser

3 Features

Professional RGB laser for use in all event areas:

n Colour mixing based on analogue diode modulation

n Laser power: 1,000 mW

n Laser class: 4

n Control options:

– DMX-512 (20 channels)

– ILDA

– IR remote control (included)

– built-in buttons and display

– USB keyboard (included)

n Sound-control with preprogrammed patterns

n Auto operation with preprogrammed patterns

n Manual control with text input and countdown via USB keyboard

n Simultaneous menu items indication on the display and as laser projection

n Key switch secured

n Suitable for truss or ceiling mounting

Features

DJ Lase RGB Pro Advanced 1000

4 Installation

Unpack and carefully check that there is no transportation damage before using the unit. Keep

the equipment packaging. To fully protect the device against vibration, dust and moisture

during transportation or storage use the original packaging or your own packaging material

suitable for transport or storage, respectively.

You can install the device standing or hanging. When in use, the device must be mounted at a

solid surface or clamped to an approved truss.

Work from a stable platform whenever you install or move the device or when you perform

any kind of maintenance. Block access under the work area.

Installation

showlaser

Connect the external safety switch (not included in scope of delivery) to the connection socket

provided on the unit. If you press the switch, the laser beam will be switched off immediately.

Follow the switch manufacturer's safety instructions and the guidelines for intended use.

Safety switch (emergency stop)

Installation

DJ Lase RGB Pro Advanced 1000

When installing the unit, observe the specified minimum height to prevent the risk of injury to

persons, and observe the limits for maximum exposure of eyes or skin to a laser.

These limits are set depending on the specific ambient conditions in each case and must be

determined on site by the laser safety authorised personnel in charge, based on the applicable

standard, DIN EN 60825-1.

WARNING!

Risk of injury caused by falling objects

Make sure that the installation complies with the standards and rules that apply

in your country. Always secure the device with a secondary safety attachment,

such as a safety cable or a safety chain.

Minimum height

Installation

showlaser

Page is loading ...

thomann StairVille DJ Lase RGB Pro Advanced 1000 User manual

Brand: thomann

Model: StairVille DJ Lase RGB Pro Advanced 1000

Category: Stroboscopes & disco lights

Type: User manual

This manual is also suitable for

DJ Lase RGB Pro Advanced 1000

Download PDF

report

thomann StairVille DJ Lase RGB Pro Advanced 1000 User manual

This manual is also suitable for

thomann StairVille DJ Lase RGB Pro Advanced 1000 User manual

Related papers

Other documents