Sony BDV-N890W Quick start guide

Type
Quick start guide

This manual is also suitable for

4-418-162-11(1)
©2012 Sony Corporation Printed in Malaysia
(1)
Quick Setup Guide/
快速設定指南
BDV-N990W/N890W/N790W
1
Connect the speakers/
連接揚聲器
Connect the speaker cords to match the color of the SPEAKERS jacks of the unit.
將揚聲器導線連接到本機上對應顏色的SPEAKERS插孔。
Rear panel of the main unit/
主機後面板
SPEAKERS
Red
紅色
White
白色
Green
綠色
Purple
紫色
Rear panel of the surround amplifier
Blue
藍色
Gray
灰色
2
Connect your TV/
連接電視機
We recommend that you connect the system and TV with an HDMI cable*
1
.
For other connections, refer to the Operating Instructions.
建議您使用HDMI電纜*
1
連接系統和電視機。關於其他連接,請參閱使用說明書。
TV
電視機
HDMI cable*
1
HDMI電纜*
1
Digital optical cord*
2
If the TVs HDMI jack is not compatible with the Audio
Return Channel (ARC) function, make this connection to
enjoy TV sound via the system.
數位光纖導線*
2
如果電視機的HDMI插孔與Audio Return Channel(ARC)
功能不相容,進行本連接方法可以透過系統欣賞電視機
聲音。
Rear of the main unit
主機背面
*1 A High Speed HDMI cable is supplied with India, Middle
East, Singapore, Thailand, and Taiwan models only.
*1 僅印度、中東、新加坡、泰國和台灣機型提供高速
HDMI電纜。
*2 Not supplied.
*2 不提供。
Note
To enjoy TV sound, press FUNCTION repeatedly to select “TV.
注意
若要欣賞電視機聲音,反覆按FUNCTION鍵選擇“TV”。
For details, refer to the Operating Instructions.
詳細資訊,請參閱使用說明書。
Continued/
續下頁
BDV-N990W is the model used for illustration purposes.
插圖中使用BDV-N990W機型。
SUBWOOFER
SUR L
SUR R
FRONT R
CENTER
FRONT L
Main unit
主機
Surround amplifier
環繞放大器
5
Perform Easy Setup
執行簡易設置
Do not insert a disc before performing the Easy Setup.
執行簡易設置前,切勿插入光碟。
1. Insert batteries into the remote.
將電池裝入遙控器。
2. Insert the wireless transceivers into
both the main unit and surround
amplifier.
將無線收發器插入主機和環繞放大器。
Firmly insert the wireless transceiver all the way
into the slot, as in the figure below.
如下圖所示,將無線收發器牢牢完全插入插槽。
EZW-RT50
Main unit
主機
Surround amplifier
環繞放大器
3. Connect the AC power cords of the
main unit, surround amplifier, and
your TV to the AC power outlet, and
then turn on the power of the main
unit and your TV.
將主機、環繞放大器與電視機的交流電
源線連接至交流電源插座,然後打開主
機與電視機的電源。
3
Connect your set-top box/
連接機上盒
If you do not use a set-top box, skip this Step.
如果您不要使用機上盒,請跳過此步驟。
IN 2IN 1
TV
電視機
This connection is
completed in Step 2.
此連接在步驟2中已完
成。
Rear of the main unit
主機背面
Set-top box
機上盒
*Not supplied.
*不提供。
HDMI cable*
HDMI電纜*
Note
To enjoy set-top box sound, press FUNCTION repeatedly to select “HDMI1” or “HDMI2.
注意
若要欣賞機上盒聲音,反覆按FUNCTION鍵選擇“HDMI1”或“HDMI2”。
4
Connect to the network/
連線到網路
Wi-Fi connection is available. To use Wi-Fi, skip this Step.
可使用Wi-Fi連接。若要使用Wi-Fi,請跳過此步驟。
*Not supplied.
*不提供。
Internet
網際網路
ADSL modem/cable modem
ADSL數據機/有線數據機
Broadband router
寬頻路由器
Rear of the main unit
主機背面
LAN cable*
LAN電纜*
4. Switch the input selector on your TV
so that system screens like the ones
below appear on the TV screen.
切換電視機上的輸入選擇器,類似以下
畫面的系統螢幕便會出現在電視機螢幕
上。
“Easy Initial Settings” screen
“簡易初始設置”畫面
Starting up
啟動
5. Perform system settings by following
the on-screen instructions in “Easy
Initial Settings” using
/
/
/
and
.
使用
/
/
/
,依照“簡易初始
設置”中的畫面指示,執行系統設定。
/
/
/
,
6.
Perform network settings by following
the on-screen instructions in “Easy
Network Settings using
/
/
/
and
.
使用
/
/
/
,依照“簡易網路
設定”中的畫面指示,執行網路設定。
[Easy Network Settings are complete.] appears
when “Easy Network Settings” is complete.
“簡易網路設定”完成時,會出現[簡易網路設
定完成。]。
Basic setup is complete. Refer to the
supplied Operating Instructions for
details on how to enjoy disc playback
and many other features.
基本設定已完成。關於如何欣賞光碟播放
和許多其他功能的詳細資訊,請參閱提供
的使用說明書。
For further details on network settings, visit the following website and check the FAQ:
關於網路設定的詳細資訊,請參閱以下網站並查看常見問答集:
http://www.sony-asia.com/section/support
  • Page 1 1
  • Page 2 2

Sony BDV-N890W Quick start guide

Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages