QSG X961x MS-6649 EN RC1.FH11 Wed Jan 27 08:59:25 2010 Seite 1
Probedruck
C M Y CM MY CY CMY K
Front Components
Back Components
1 - Power Socket
2 - HDMI port
3 - Audio input for the video mode
4 - VGA input
5 - SCART input
6 - USB port
7 - eSATA Port
8 - LAN Port (RJ-45)
9 - DVB-T and analog aerial connection
10 - DVB-S aerial connection
11 - Webcam
12 - Light sensor
13 - Microphone
14 - Multi touch display
15 - Fingerprint sensor
16 - Power ON/OFF
17 - Device indicators (optional)
18 - Sensor buttons
19 - Control panel with sideshow touch display
(optional)
20 - Volume control
21 - HDMI Out
22 - Loudspeaker connection for a central loudspeaker
or a subwoofer
23 - Microphone*
24 - Line In*
25 - Audio Out* / Digital Audio Out (S/P-DIF, optical)
26 - Optical Drive
27 - Express Card Slot 54
28 - Multimedia card reader
29 - Hard drive slot
30 - Cover for HDMI and audio out as well as TV-Tuner
31 - Stereo speaker
32 - Cover for the VESA device for attaching it to a wall
holder
33 - Mirror for simplified use of the connection
Bottom Components
Quick Reference
Left Side Right Side
English
*Ports with dual function. Configuration is set with the included software.
QSG X961x MS-6649 EN RC1.FH11 Wed Jan 27 08:59:25 2010 Seite 2
Probedruck
C M Y CM MY CY CMY K
MSN 4003 2519
i
1. Inserting batteries in keyboard
Connect the mains adapter supplied to the All-In-One PC.
Then, connect the mains cable to the adapter and connect it subsequently to a socket.
Press the on/off switch on the front once, to switch on your All-In-One PC.
Follow the instructions on the screen. Dialogue boxes will explain any steps that need to be taken.
The greeting procedure will guide you through the following screens and dialogues.
Turn the keyboard over and open the battery compartment.
Insert two batteries (LR6/AA, 1,5V). Ensure that the polarity corresponds to the illustration (+ must
correspond with + and - with -).
Shut the battery compartment.
2. Connecting the keyboard and power on
Connect the USB receiver to a USB connection of your All-In-One PC.
Set the switch under the keyboard to ON.
.
3. Starting
Pease take special notice of the warnings in
the main user manual!
Antivirus software will have been installed on your All-In-One PC. You will be asked to register the AntiVirus
software after the first restart after setting up your All-In-One PC for the first time.
Carry out this free of charge online registration to release the software and to receive 90 days free updates.
Read about how you can protect your All-In-One PC after the expiry of these 90 days in the Operating
Instructions.
Note:
Do not install additional antivirus software as this will degrade the performance of your
All-In-One PC.
Note:
The operating system and antivirus software are automatically updated when the first online connection
is made. These processes usually take a few minutes, during which time the operating speed of the
All-
In-One PC
may be affected although this is only noticeable on initial start-up.
Quick Start Guide
Activating your antivirus software
Before switching on your computer ensure that there is not a disc (CD, DVD, etc) in the
optical drive. Some discs may prevent the operating system booting correctly from the hard drive.
Please find further, more detailed setup
instructions in the supplied "User's Guide".
/