Panasonic CQRDP152N Owner's manual

Brand: Panasonic

Model: CQRDP152N

Category: Car video systems

Type: Owner's manual

●

English : Please read these instructions carefully before using this product.

●

Deutsch : Bitte lesen Sie diese Anleitung sorgfältig, bevor Sie das Produkt in

Gebrauch nehmen.

●

Français : Lisez attentivement ces instructions avant d’utiliser le produit.

●

Nederlands : Leest u deze handleiding alstublieft zorgvuldig door voor u dit product gaat

gebruiken.

●

Svenska : Läs dessa anvisningar noggrant innan denna produkt tas i bruk.

●

Italiano : Si prega di leggere attentamente queste istruzioni prima di utilizzare questo prodotto.

●

Español : Lea estas instrucciones antes de poner en funcionamiento este aparato.

●

Polski : Przed rozpoczeçciem uzæywania urzaçdzenia prosimy o dok¬adne przeczytanie instrukcji.

CD Player/Receiver with CD Changer Control

CQ-RDP162/RDP112N

CD Player/Receiver

CQ-RDP152/RDP142/RDP102N

Operating Instructions

Bedienungsanleitung

Manuel d’instructions

Gebruiksaanwijzing

Bruksanvisning

Manuale di istruzioni

Manual de Instrucciones

Instrukcja obs¬ugi

VOL

SEL

SCAN

DISC

REPEAT

RANDOM

MUTE PTY

SOURCE

PWR

REG

TUNE

TRACK

BAND

DISP

123456

CQ-RDP162N

CD RECEIVER WITH CHANGER CONTROL

REMOTE

EON

PTY

English

DeutschFrançaisNederlandsSvenskaItalianoEspañol

Polski

Thank you very much for purchasing a Panasonic CD Player/Receiver.

Panasonic welcomes you to the growing owners' family of our advanced electronic products.

We make every endeavor to offer you the significant advantages of the most up-to-date electronic and

mechanical engineering, manufactured with carefully and optimally selected components and

assembled by the people who are proud of their excellent reputation established over the years.

We know this product will bring you many hours of enjoyment.

After you realize its quality, value and reliability,

we are sure that you are proud to be a member of our family.

Fantastic Sound

Sophisticated Product Achieved by Optional Functions

■ Sound System with Spurting Realism (2-channel Power Amplifier)

■ Powerful Heavy Bass(Stereo/Mono Power Amplifier) :

CY-M7052EN

■ Smooth Uninterrupted Play (CD Changer) :

CX-DP88N, etc.

CD Changer: CX-DP88N

(Up Grade)

(For CQ-RDP162/RDP112N)

Sub-Woofer

(Up Grade)

English

Space

Contents

Specifications

●

Specifications and design are subject to modification

without notice due to improvements.

Note

■ General

Power Supply

Tone Controls (Bass)

Tone Controls (Treble)

Current Consumption

Maximum Power Output

Power Output

Speaker Impedance

Pre-Amp Output Voltage

Pre-Amp Output Impedance

Dimensions (Main Unit)

Weight (Main Unit)

DC 12 V (11 V - 16 V),

Test Voltage 14.4 V, Negative Ground

±12 dB at 100 Hz

±12 dB at 10 kHz

Less than 2.5 A

(CD mode, 0.5 W 4-Speaker)

45 W x 4 (at 4 Ω)

20 W x 4 (DIN45 324, at 4 Ω)

4 - 8 Ω

2 V (CD mode)

600 Ω

178(W) x 50(H) x 150(D) mm

1.4 kg

■ Stereo Radio

Frequency Range

Usable Sensitivity

Stereo Separation

87.5 - 108 MHz

6 dB/µV(S/N 30 dB)

35 dB (at 1 kHz)

Frequency Range

Usable Sensitivity

531 - 1 602 kHz

28 dB/µV (S/N 20 dB)

Frequency Range

Usable Sensitivity

153 - 279 kHz

32 dB/µV (S/N 20 dB)

■ CD Player

Sampling Frequency

DA Converter

Error Correction System

Pick-Up Type

Light Source

Wavelength

Frequency Response

Total Harmonic Distortion

Signal to Noise Ratio

Wow and Flutter

Channel Separation

Panasonic Super Decoding

Algorithm

Astigma 3-beam

Semiconductor laser

780 nm

20 Hz - 20 kHz (±1 dB)

96 dB

0.01 % (1 kHz)

Below measurable limits

75 dB

8 times oversampling

MASH 1 bit/4 DAC System

CQ-RDP162N

CQ-RDP152N

CQ-RDP102N

CQ-RDP112N

CQ-RDP142N

Stereo/Mono

Power Amplifier :

CY-M7052EN

(Up Grade)

● Specifications ................................. 3

● Introduction..................................... 4

● Power and Audio Controls .............. 6

● Radio Basics................................... 7

Radio Data System (RDS).............. 8

● CD Player and CD Changer ......... 10

● Troubleshooting ............................ 11

Refer to the Installation Instructions

supplied separately for installation and

wiring.

Introduction

■ For safe driving

● Moderate the volume not to miss traffic infor-

mation.

■ Shorting prevention

● Do not get this unit wet.

■ CD slot

● Do not insert anything other than a CD.

■ Power supply

● 12-volt negative ground battery system.

Product service, repair and inquiry

● Consult your nearest Panasonic Service

Center.

■Cleaning

●

Wipe the unit with a

soft dry cloth.

Precaution

●

Never apply volatile

liquids such as ben-

zine and thinner to

prevent damage.

Maintenance

●This operating instruction manual applies to the

five models below. All illustrations represent

model CQ-RDP162N unless otherwise specified.

Note

Models Changer Control

Illumination color

CQ-RDP162N Yes Amber

CQ-RDP152N None Amber

CQ-RDP142N None Red

CQ-RDP112N Yes Green

qMounting collar

rCase for the

removable front

panel

wBolt tTrim plate

Cautions

Accessories

ePower connector

● Remote control

(CA-RC61EX)

Options (Sold separately)

● CD Changer

(For CQ-RDP162

/RDP112N)

CX-DP88N

This product is a class I laser product.

Note that this product uses a visible/invisi-

ble laser beam which could cause haz-

ardous radiation exposure if directed.

Be sure to operate this product correctly

as instructed.

Use of controls or adjustments or perform-

ance of procedures other than those spec-

ified herein may result in hazardous radia-

tion exposure. Do not open covers and do

not repair yourself. Refer servicing to quali-

fied personnel.

Laser products:

Wave length: 780 nm

Laser power: No hazardous radiation is

emitted with safety protection.

Protection of preset memory

Never disconnect the battery power cord.

Note

English

Clock Setting

Theft prevention

FM RDS CT service adjusts your clock automatically.

If you cannot get RDS CT service, set the clock as follows.

Note

BAND

TUNE

DISP

Press

(AM mode)

(Radio mode)

Press

(NO CT)

Press

DISP

DISP DISP

DISP

Hold down

for over 2

sec.

AM 153

NO CT

CT 0:00

CT 10:00

(Blink: Hours)

CT 10:35

(Completed)

Press

FM1 87.50

Clock can be set only in AM radio mode.

●

An alarm is generated to remind you of the front panel

when turning off the power.

Note

[]: Release the

front panel.

q Pull the right side.

w Slide the left side.

a detach the panel.

Put the panel into

the case

■ Take the front panel with you when getting off the car.

■ Install the front panel

q Slide the left side.

w Press the right

side until a "click"

is heard.

(Blink: Minutes)

(Hours set)

(Minutes set)

Power and Audio Controls

[SOURCE] :

Turn the

power on.

● [SOURCE] (Hold down) :

Turn the power off.

: Up

: Down

● Hold down: fast forward

Start the engine first!

[SEL] :

Select a

mode.

: Up

: Down

● No operation for 5 sec.

a Return to the regular

mode.

● If the fader is set to

front, the pre-amp out-

put (rear) is decreased.

Note

(–12 to +12 in 3 dB step)

(left/right : 1 to 15)

(front/rear : 1 to 15)

Sound quality adjustment

Volume adjustment Power on

[VOL] : Adjust the level.

● Power on

●

The volume increases gradually

to the last level if that level was

over 20.

●

When first powered up, a mes-

sage is displayed

● [DISP]: Stop the message.

● [SOURCE](Hold down at power

off) :Turn on the power and dis-

play the message.

Notes

on/

off

MUTE

[MUTE] :Toggle the

Mute on and off.

● Mute the sound.

(Hold down over 2 sec.):

Toggle Loudness on and

off.

● Enhance bass and treble

tones at low volume.

Regular Mode

Volume

Bass

Treble

Balance

Fader

English

Radio Basics

[BAND] :

Select a band.

[BAND]

(Hold down over 2 sec.

a release) :

Radio

CD Player

[SOURCE] :

Select the

radio mode.

CD Changer

BAND TUNE

PTY

(MONO / LOCAL)

● Up to 6 stations can be preset in each band (AM x 6, FM x 18 : FM1 - FM3)

■Automatic presetting

[BAND] :

Select a band.

[ TUNE ] :

Select a station.

(Hold down over 0.5

sec. a release) : Seek

tuning

■Tuning and Manual presetting

Preset button

(Hold down until one

blink) : Register the

station.

Automatically tune the

6 stations with good

reception and save them.

Preset stations are displayed

for 5 sec. respectively.

[BAND] :

Select a band.

Preset button :

Select a station.

■ Use of preset button

PTY

[PTY] : Toggle the local

mode on and off in an

FM broadcast.

■ FM MONO / LOCAL (FM/AM)

● FM mono : reduces noise.

● Local : auto-seeks only high-intensity stations.

MONO OFF / LOCAL OFF

MONO ON / LOCAL OFF

MONO ON / LOCAL ON

MONO OFF / LOCAL ON

■ FM broadcast

LOCAL OFF

LOCAL ON

■ AM (LW/MW)

broadcast

How to listen to the radio

Preset memory / Tuning

Station selection

●

Never preset stations while driving the car.

Caution

(Hold down over 2 sec.)

STEREO

Stereo Indicator

Band Preset Number

Radio Data System

(

RDS

)

■ [AF] : Change the AF mode.

● The RDS service and its availability vary with areas and stations.

● The same program is auto-tuned depending on

reception condition.

● TP :

RDS stations that provide traffic information periodically.

● TA : Radio announcement of traffic information.

AF 1

AF 2

OFF

AF tuning with

normal sensitivity

(Default:

AF1)

(Default:

TA OFF)

AF tuning with high

sensitivity

No alternative frequency

■ [TA] : Toggles the TA mode

on and off. (TP auto-tuned)

TA ON

TA OFF

DISP

■ [DISP] :

Change the display.

■ [AF] : Toggle the

region mode on and

off.

■ Preset memory

(Refer to Radio Basics for presetting.)

Automatic preset

● [BAND](Hold down over 2

sec.) : Preset stations (6 at

a time)

Program Service Name

Frequency

Clock Time

3 sec.

■ TA volume

● TA volume should

be adjusted while

you are listening to

a traffic announce-

ment.

■ TA or mute

● [TA](Hold down over

2 sec.) : Activate the

"TA or mute" mode.

● [TA] : Cancel the "TA

or mute" mode.

[TA](Hold down over

2 sec. again) : Cancel

the "TA or mute" and

the "TA ON" mode.

Alternative frequency (AF) Periodical traffic information

(Clock auto-adjusted)

Manual preset

@[ TUNE ] : Select a station.

APreset the station to one of the

preset buttons [1] to [6].

[TA ON] : Automatically

tune in to a TP when

a station other than a TA

station is being received.

[REG ON](Hold down

over 2 sec.) : Tune in to a

station

that broadcasts

the

totally same program.

■ Preset tune (Refer to Radio Basics for preset tuning.)

● AF 1 / AF 2 mode : Auto-AF-tuned to station with good reception

●

Press the same preset button again to tune in to an AF station with good

reception if the reception of the current station is poor.

● A station name

is displayed

when it is an

RDS station.

Note

● This function is called "PI seek".

Note

●

[REG OFF](Hold down

over 2 sec.) :Tune in to a

station that broadcasts a

different program in

some cases.

TA standby

● A TA broadcast

causes automatic

change-over to radio

mode.

Note

● AF 1 / AF 2 mode : Tune in

to only RDS stations.

Note

● AF 1 / AF 2 mode : Seek tuning

selects only RDS stations.

Note

TP auto search

● Auto-tuned in to

another TP when

reception is poor.

RDS

EON

STEREO

RDS

EON

STEREO

RDS

EON

STEREO

DISC

RDS EON TP

MONO

English

1 News

NEWS

3 Sport

SPORT

Pop. music

POP.M

Classic

music

CLASSICS

Speech

AFFAIRS / INFO

EDUCATE / DRAMA

CULTURES / SCIENCE

VARIED / WEATHER

FINANCE / CHILDREN

SOCIAL A / RELIGION

PHONE IN / TRAVEL

LEISURE / DOCUMENT

Other

Music

ROCK M / M.O.R.M

LIGHT M / OTHER M

JAZZ / COUNTRY

NATIONAL / OLDIES

FOLK M

(Default:

PTY OFF)

● Programs can be according to type such as

news, rock-and-roll, juvenile programs, etc.

■ [PTY] : Toggle the PTY mode

on and off. (PTY display)

PTY

PTY ON

PTY OFF

■ PTY selection

@[ TUNE ] : Select

a program type.

■ PTY preset search

Preset button : Select

a preset program type.

(Ex.)

DISP

APress the same preset

button.

■Change of registered

buttons

@[ TUNE ] or preset

button: Select a preset

program type.

(Ex.)

A[BAND] :

Seek a station.

■ PTY preset

Preset by program type.

■ Receiving EON data

● TA and AF functions will be enhanced with RDS

information.

●

TA : Traffic information from other stations can

be received, too.

●

AF : The AF list of RDS stations is always

updated.

No.

Program type

Display

Program type selection

Notes

APreset button (Hold

down until one blink) :

Reregister the con-

tents.

● [DISP] : Toggle the language between English

and Swedish.

Note

Contents

■ Emergency announcement

● "ALARM" blinks and the announcement is

received automatically.

● Emergency announcements are received auto-

matically except in the AM mode.

■ Clock adjustment

● RDS service automatically adjusts the integrated

clock.

Example

●

Even if you preset a station at a faraway

location, AF allows you to receive the

same program at home.

●

Or AF automatically tunes in to a station

that is broadcasting the same program.

(This function is useful when reception is

poor.)

●

AF allows you to seek TP stations in local

areas.

SPEECH / MUSIC /

NEWS / AFFAIRS /

INFO / SPORT /

EDUCATE / DRAMA /

CULTURES / SCIENCE /

VARIED / POP M /

ROCK M / M.O.R.M /

LIGHT M / CLASSICS /

OTHER M / WEATHER /

FINANCE / CHILDREN/

SOCIAL A / RELIGION /

PHONE IN / TRAVEL /

LEISURE / JAZZ /

COUNTRY / NATIONAL /

OLDIES / FOLK M /

DOCUMENT /

PTY

RDS

STEREO

PTY

CD Player and CD Changer

■ Other functions ■ Error indication

● CD dirtied.

● CD upside

down.

● CD scratched.

● No CD in

magazine.

CD player

● Eject CD.

CD changer

● Next CD auto-

selected.

●

Eject the CD and

consult your nearest

Panasonic Service

Center.

Message Cause Remedy

Random play

Scan Play

Repeat Play

Track

Disc

Track

● 10-sec. play of every track.

(once per track)

● 10-sec. play of 1st track in

every CD in magazine.

● Current track repetition.

How to listen to CDs

● Insert CDs in mag-

azine.

(Changer)

● Play in random order.

●

Random play of every track in

magazine/CD changer.

REPEAT :

RANDOM :

[SOURCE] :

Select CD Player.

■ When a CD is already loaded

[

TRACK

] : Select a track.

Disc indicator :

Lights when CD is loaded.

CD loading

Insert a CD.

(Playback starts.)

● Next track :

● Start of current track : Press once

● Previous track : Press twice

● Hold down : Fast forward

Fast reverse

Release to play CD.

DISP : displays the clock.

(Press again to cancel it.)

(Playback starts.)

SCAN :

(Disc Scan)

(Track Scan)

* Changer only

SOURCE

DISC

REP

DISC

Radio

CD Player

CD Changer

Make sure that the disc indicator is off before

loading a disc. If the disc indicator is on,

eject the disc, then load a new disc.

TRACK

Eject

Track Number

Playing Time

Disc Indicator

DISC

CD-RW

8 cm

Available Discs

Non-available

MP3

REP

This unit does

not support CD

text display.

■ CD Player

English

■ CD changer control

(For CQ-RDP162/RDP112N)

¡Use the CD changer exclusively to play back normal

music CDs. It cannot play back CD-ROMs, CD-RWs or

MP3s. (Some CD-Rs are supportedd, but not all.)

¡This unit dose not support CD text display.

Cautions

● Only CDs with the label at

right are usable.

● Do not touch the recorded

surface.

● Normal CDs

only.

● Wipe CDs with a

dry soft cloth in

the direction

specified at right.

Troubleshooting

● Never try to repair by yourself.

Something wrong?

(Ex. no sound, smoke and smell

a possibility of fire or shorting)

@Turn off the power immediately.

ADetach the power cord and bring the unit to

your dealer.

Labeled side up!

● Avoid leaving CDs in the following places.

●

Direct sunlight

●

Dirty or moist

●

Seats or dashboard

[SOURCE] :

Select CD Changer.

(Playback starts.)

[

TRACK

] :

Select a track.

● Next track :

● Start of current track :

Press once

● Previous track :

Press twice

● Hold down :

Fast forward

Fast reverse

Release to play CD.

[ DISC

] : Select a CD.

● Previous CD :

● Next CD :

DISC

Disc Number

Track Number

● Start the engine. (

Or turn the igni-

tion switch to the ACC position.

)

● Verify the wiring. (

Ex. battery cord,

ACC cord, grounding cord, etc.

)

● Fuse blown (Contact the nearest

Panasonic Service Center.)

● Ask a professional for fuse

replacement.

●

Be sure to use the same rated fuse.

● Disable the mute function.

● Verify the wiring.

● Wait until the dew disappears

before turning on the unit

●

Keep a distance between this unit

and an activated cellular phone.

●

Tune in to another high-intensity station.

● Extend the antenna fully.

●

Connect the battery cord correctly.

● Load the CD correctly.

● Clean the CD.

● The maximum permissible tilt is

30° from front to rear.

● Secure the unit.

●

Turn off the car engine (ACC off) and remove

the fuse from the battery lead (yellow) for 1

minute or more. Then reinstall the fuse.

● Adjust the balance and fader.

● Verify the wiring.

● Connect the speaker cord cor-

rectly.

Symptom Check point

■ General

No power

No sound

■ RADIO

Noise

Frequent

noise

Preset data

deleted

■ CD Player

No sound, or CD

or CD-R is auto-

matically ejected

Sound skip, poor

sound quality

Sound skip

due to vibration

CD not

ejectable

■ Sound quality

Left and right

sounds are

reversed

Any one of

speakers (front,

rear, right and

left) does not

generate sound.

YEFM283940 SAH0502-0 Printed in Hungary

Matsushita Electric Industrial Co., Ltd.

Central P.O. Box 288, Osaka 542-8588, Japan

Matsushita Communication Deutschland GmbH

Lahnstraße 5 Industriegebiet Süd

24539 Neumünster, F.R. Germany

Consult a professional for installation.

●Verify the radio using the antenna and speakers before

installation.

Wenden Sie sich zum Einbau an einen Fachmann.

●Probieren Sie den Radiobetrieb vor dem Einbau mit Antenne

und Lautsprechern aus.

Prenez contact avec un spécialiste pour le montage.

●Vérifiez l’autoradio avant de procéder au montage.

Vraag een vakman voor de installatie.

●Controleer voor de installatie of de radio werkt met de

antenne en de luidsprekers.

Vorsichtsmaßnahmen beim Einbau / Précautions d

’

installation / Let op deze punten bij de installatie

Cautions in installing

Exclusively operated with 12-volt battery with negative (–) ground.

Dieses Gerät ist ausschließlich für den Anschluß an Bordnetze mit

12 V Batterie und negativer Klemme an Masse bestimmt.

Alimentez l’appareil absolument par la batterie de 12 volts avec sa

polarité négative (–) mise à la masse.

Uitsluitend voor gebruik met een 12 Volt accusysteem met

negatieve (–) aarding.

Connect the power lead (red) and the battery lead (yellow)

after having completed all other connections. (for non-ISO

connector)

Schließen Sie das Stromversorgungskabel (rot) und das

Batteriekabel (gelb) an, nachdem Sie alle anderen Anschlüsse

ausgeführt haben (wenn kein ISO-Stecker verwendet wird)

Connectez finalement le fil d’alimentation (rouge) et le fil de

batterie (jaune). (Pour un connecteur non-ISO)

Sluit pas op het allerlaatst de stroomdraad (rood) en de

accudraad (geel) aan. (Voor een niet-ISO aansluiting.)

Connect the battery lead (yellow) to the positive (+) terminal of

the

battery or fuse block terminal (BAT). (for non-ISO connector)

Schließen Sie das Batteriekabel (gelb) an die positive (+) Klemme

der Batterie oder an die (BAT) Klemme des Sicherungsblocks an

(wenn kein ISO-Stecker verwendet wird).

Connectez le fil (jaune) à la borne positive (+) de la batterie ou à

la borne (BAT) de la boîte à fusibles.

(Pour un connecteur non-

ISO)

Sluit de accudraad (geel) aan op de positieve (+) aansluiting van

de accu of van het zekeringenblok (BAT). (Voor een niet-ISO

aansluiting.)

Apply insulating tape to bare leads.

Isolieren Sie alle freiliegenden Leiter.

Recouvrez les fils nus d’un ruban isolant.

Isoleer blote draadeinden met isolatieband.

Secure loosened leads.

Sichern Sie alle losen Leiter.

Resserrez les connexions de fils.

Zet loshangende draden vast.

●Mounting angle side to side : horizontal

front to rear : 0-30°

●Montagewinkel seitlich : horizontal

vorne-hinten : 0-30°

●Angle de montage latéral : horizontal

longitudinal : 0 à 30°

●

Bevestigingshoek links/rechts

: horizontaal

voor/achter : 0 - 30°

●Mounting space

●Einbauöffnung

●Espace nécessaire

pour le montage

●Benodigde ruimte

182mm

4.5 mm – 6.0 mm

Mitgelieferte Hardware / Accessoires / Meegeleverde onderdelen

Supplied Hardware

No.

Nr.

N°

Nr.

Item

Bezeichnung

Pièces

Onderdeel

Diagram

Diagramm

Croquis

Afbeelding

No.

Nr.

N°

Nr.

Item

Bezeichnung

Pièces

Onderdeel

Diagram

Diagramm

Croquis

Afbeelding

Q'ty

Stückzahl

Q’té

Hoev.

Mounting collar / Einbauhalterung /

Cadre de montage / Bevestigingskraag

Mounting Bolt (5 mm ø)

Befestigungsschraube (5 mm ø)

Boulon de montage (ø de 5 mm)

Bevestigingsbout (5 mm ø)

Power connector

Versorgungsstecker

Connecteur d’alimentation

Stroomstekker

Case for removable front panel

Etui für das abnehmbare Bedienteil

Coffret à panneau de façade amovible

Houder voor het afneembare voorpaneel

Trim plate

Abdeckplatte

Plaque de garniture

Afwerkingsrand

YEFM292867 SAH0502-0 Printed in Hungary

Precaution Precaution / Précautions / Voorzorgen

Q'ty

Stückzahl

Q’té

Hoev.

The dashboard should be 4.5 mm - 6 mm thick in order to be

able to support the unit.

Für einen solchen Einbau sollte das Armaturenbrett eine

Dicke von 4,5 bis 6 mm aufweisen.

L'épaisseur du tableau de bord doit se trouver dans les lim-

ites de 4,5 à 6 mm pour être capable d'accueillir l'appareil.

Het dashboard zelf moet 4,5 - 6 mm dik zijn om het toestel te

kunnen dragen.

MAX. 30°

Installation Einbau / Montage / Installatie

Einbau des Gerätes / Mode de montage de l’appareil / Installeren van het toestel

Cautions : ●Wear gloves for safety.

●Carry out wiring first, then check it.

Vorsicht : ●Tragen Sie Handschuhe, um sich vor

Verletzungen zu schützen.

●Beenden Sie zuerst die elektrischen

Anschlüsse und kontrollieren Sie diese

danach.

Précautions : ●Portez les gains pour la sécurité.

●Procédez d’abord aux connexions de fils

et vérifiez leur continuité.

Let op: ●Draag voor de veiligheid handschoenen.

●Sluit eerst de bedrading aan en controleer

deze vervolgens.

How to secure the rear of the unit Sichern der Geräterückseite

Fixation de l’appareil à l’arrière/ Vastzetten van de achterkant van het toestel.

3mm

Using the rear support strap (Option)

Verwendung der Einbauleiste (Option)

Exemple d’utilisation d’une plaque-support arrière (prévue

en option)

Bij gebruik van de achter-steunstrip (los verkrijgbaar)

Tapping screw (Option)

Blechschraube (Option)

Vis taraudeuse (option)

Zelftappende schroef

(los verkrijgbaar)

To the unit / An das Gerät

Côté appareil / Naar het toestel

Rear support strap (Option)

Einbauleiste (Otpion)

Plaque-support arrière (option)

Achter-steunstrip

(los verkrijgbaar)

Hexagonal nut (Option)

Sechskantmutter (Option)

Ecrou hexagonal (option)

Zeskantige moer

(los verkrijgbaar)

Fire wall of car / Brandschutzwand des Fahrzeuges

Tablier de voiture / Brandschot van de auto

b Secure the lock lever (left side).

ƒMake sure the lock lever is not

bent outward.

b Sichern Sie den

Verriegelungshebel (linke Seite).

ƒDer Hebel darf nicht nach außen

gebogen sein.

b Fixez le levier de blocage (côté

gauche).

ƒAssurez-vous que le levier n’est

pas courbé à l’extérieur.

b Zet de vergrendelstrip vast (link-

erkant).

ƒZorg ervoor dat deze strip niet

naar buiten verbogen raakt.

Disconnect battery negative.

Klemmen Sie das Massekabel (–) der Batterie ab.

Déconnectez le fil de la borne négative de la batterie.

Koppel de accukabel van de negatieve pool los.

wInsert the unit into the mounting collar q. (a, b)

wSetzen Sie das Gerät in die Einbauhalterung q ein. (a, b)

wIntroduisez l’appareil dans le cadre de montage q. (a, b)

wSchuif het toestel in de bevestigingskraag q. (a, b)

eSecure the rear of the unit.

eSichern Sie die Rückseite des Gerätes.

eFixez l’appareil à l’arrière.

eHet toestel komt van achteren vast te zitten.

Mount the trim plate t.

Setzen Sie die Abdeckplatte t auf.

Mettez en place la plaque de garniture t.

Bevestigen van de afwerkingsrand t.

Connect battery negative (–).

Schließen Sie die negative (–) Batterieklemme wieder an.

Reconnectez le fil à la borne négative (–) de la batterie.

Sluit de negatieve (–) accukabel weer aan.

How to bend the mounting tabs

Umbiegen der Einbaulaschen

Cadre de montage avec leurs onglets relevés

Ombuigen van de bevestigingslipjes

Mounting the collar q in the dashboard bend mounting

tabs.

Setzen Sie die Einbauhalterung q in das Armaturenbrett ein

Biegen Sie die Einbaulaschen um.

Introduisez le cadre de montage q dans le tableau de bord.

Pliez les onglets de montage.

Steek de bevestigingskraag q in het dashboard

Buig de bevestigingslipjes om.

Using the rubber cushion (Option)

Verwendung des Gummikissens (Option)

Exemple d’utilisation d’un canon en

caoutchouc (prévue en option)

Bij gebruik van het stootrubber (los verkrijg-

baar)

Mounting Bolt

w Befestigungsschraube

Boulon de montage

Bevestigingsbout

Attach the power connector e and the bolt w to the unit.

qBringen Sie den Versorgungsstecker e und die

Befestigungsschraube w am Gerät an.

qFaites passer le connecteur e et le boulon w dans l’ap-

pareil.

qBevestig de stroomstekker e en de bevestigingsbout w

aan het toestel.

Rubber cushion (Option)

Gummikissen (Option)

Canon en caoutchouc

(option)

Stootrubber (los verkrijg-

baar)

To the unit

An das Gerätt

Côté appareil

Naar het toestel

Rear support bracket

(supplied with car)

Einbauleiste (vorhan-

den im Fahrzeug)

Support arrière (fourni

avec votre voiture)

Achter-steunbeugel

(behorend bij de auto)

Mounting Bolt

Befestigungs-

schraube

Boulon de

montage

Bevestigings-

bout

How to install the unit

Fire wall of

car

Brandschutz

wand des

Fahrzeuges

Tablier de

voiture

Brandschot

van de auto

Example/Beispiel

Example/Voorbeeld

VOL

SEL

SCAN

DISC

REPEAT

RANDOM

MUTE PTY

SOURCE

PWR

REG

TUNE

TRACK

BAND

DISP

123456

CQ-RDP162N

CD RECEIVER WITH CHANGER CONTROL

REMOTE

EON

PTY

●

English : Please read these instructions carefully before using this product.

●

Deutsch : Bitte lesen Sie diese Anleitung sorgfältig, bevor Sie das Produkt in Gebrauch nehmen.

●

Français : Lisez attentivement ces instructions avant d’utiliser le produit.

●

Nederlands : Leest u deze handleiding alstublieft zorgvuldig door voor u dit product gaat gebruiken.

Installation Instructions (English)

Einbauanleitung (Deutsch)

Instructions de montage (Français)

Installatie-handleiding (Nederlands)

EnglishDeutschFrançaisNederlands

Models

Modell / Modèle / Model

CQ-RDP162N

CQ-RDP112N

CQ-RDP152N

CQ-RDP142N

CQ-RDP102N

Changer Control

/ Wechsler-Steuerung / Commande de changeur / Bediening wisselaar

Yes / Ja / Prévu / Ja

None / Ohne / Non prévu / Nee

CD Player/Receiver with CD Changer Control

CQ-RDP162/RDP112N

CD Player/Receiver

CQ-RDP152/RDP142/RDP102N

a Snap on

Einschnappen

Engagement

bloquant

Vastklikken

Lock lever (Right side): Not used

Verriegelungshebel (rechte Seite):

Nicht verwendet

Levier de blocage (côté droit): non utilisé

Vergrendelstrip (rechterkant): Niet gebruikt

Page is loading ...

Panasonic CQRDP152N Owner's manual

Brand: Panasonic

Model: CQRDP152N

Category: Car video systems

Type: Owner's manual

Download PDF

report

in other languages

Deutsch: Panasonic CQRDP152N Bedienungsanleitung
Nederlands: Panasonic CQRDP152N de handleiding

Panasonic CQRDP152N Owner's manual

Panasonic CQRDP152N Owner's manual

in other languages

Related papers

Other documents