Shimano BR-RS505 Service Instructions

Type
Service Instructions

This manual is also suitable for

One Holland, Irvine, California 92618, U.S.A.
Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands
Phone: +31-341-272222
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi,
Osaka 590-8577, Japan
Please note: specifications are subject to change for improvement without notice. (English) © May 2015 by Shimano Inc. HTR
SI-8NU0A-001-00
Technical Service Instructions
SM-MA-R160D / D
Disc brake mount adapter (for 160 mm rotor)
Place the adapter onto the brake caliper as shown in the illustration, and then install the adapter to the frame.
1. Attach the adapter to the brake caliper.
Note:
Observe the direction indicated on the adapter when installing it.
After installing the adapter using the brake caliper mounting bolt B, to prevent it from falling out, be sure to install
the bolt mounting pin.
Tightening torque:
6 - 8 N∙m {53 - 69 in. lbs.}
Bolt mounting pin
Adapter
Brake caliper
Brake caliper mounting bolt B
2. Insert the brake caliper mounting bolt C into the frame mount area, and make sure that the length of the protruding
part is 13 mm.
Note:
When using a bolt length selector, make sure that the tip of the brake caliper mounting bolt C fi ts within range A.
When checking the length of the brake caliper mounting bolt C, do not use a washer.
Brake caliper mounting bolt C
13 mm
A
Brake caliper mounting bolt C Bolt length selector
3. Attach the adapter to the frame.
Note:
Be sure to use the washers when installing the adapter.
Be sure to attach the snap retainer when attaching the brake caliper mounting bolts C to prevent them from falling out.
Washer
Snap retainer
Tightening torque:
6 - 8 N∙m {53 - 69 in. lbs.}
Frame thickness Bolt length
10 mm 23 mm
15 mm 28 mm
20 mm 33 mm
25 mm 38 mm
30 mm 43 mm
35 mm 48 mm
Brake caliper mounting bolt C
  • Page 1 1

Shimano BR-RS505 Service Instructions

Type
Service Instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI