DataCart
Compact case with trolley system for Notebooks up to 16.4”
and HP/Canon printer
The sturdy case and locks on the new DataCart ensure that
your mobile computing equipment is protected perfectly. Your
Notebook is well protected whilst in transit by the extra
cushioning in the Notebook compartment. The Notebook
compartment has also been increased so that it can now
accommodate Notebooks up to 16.4&rdquo. in size.
Documents can be stored in the usual manner in the
document compartment and in the separate document pocket.
This external pocket can be easily removed from the side of
the case as required and used on its own. Two side pockets
offer additional space for mobile accessories, such as a
mobile phone, keys, pens etc. Power supply units can be
stored in a specifically designed ABS box. All cabling runs
predominantly concealed inside the case. All equipment is
powered by a single cable via an opening in the left hand side
pocket. Simply remove your Notebook to start working. Your
printer is ideally fastened to the front flap with &ldquo.
QuickFix&rdquo. printer mounting, which is an optional
accessory. The printer flap has two push buttons attached to
the sides so that it does not flap down when the case is
opened. These can be easily released when in use so that the
printer flap can be positioned. Your mobile office is especially
convenient to move around with the integrated trolley system.
The removable shoulder strap that is supplied can be used as
an alternative transport solution.
Art. Nr.: N25728K (black)
Material:
Weight: 5.9 kg / 13.01 lbs
Dimensions: 490 x 420 x 220 mm / 19.3 x 16.5 x 8.7 inch
For Notebooks up to: 390 x 330 x 50.0 mm / 15.4 x 13 x 2 inch
Phone:
FAX:
-
1
