LSI LSI00189 Datasheet

Category
Interface cards/adapters
Type
Datasheet

LSI LSI00189 is a high-performance, 16-port SAS/SATA host bus adapter that enables large-scale storage arrays with data transfer rates up to 6Gb/s per port. It supports up to 512 SAS or SATA devices, making it ideal for tiered SATA and SAS RAID systems, large-scale external JBOD enclosures, and storage expansion. With its x8 PCI Express 2.0 host interface and four external x4 SFF8088 Mini-SAS connectors, the LSI LSI00189 delivers superior system performance and flexible SATA+SAS array support, optimizing costs and maximizing storage capacity.

LSI LSI00189 is a high-performance, 16-port SAS/SATA host bus adapter that enables large-scale storage arrays with data transfer rates up to 6Gb/s per port. It supports up to 512 SAS or SATA devices, making it ideal for tiered SATA and SAS RAID systems, large-scale external JBOD enclosures, and storage expansion. With its x8 PCI Express 2.0 host interface and four external x4 SFF8088 Mini-SAS connectors, the LSI LSI00189 delivers superior system performance and flexible SATA+SAS array support, optimizing costs and maximizing storage capacity.

LSI SAS 9200-16e
Sixteen-Port 6Gb/s PCI Express SATA+SAS Host Bus Adapter
Product Brief
A P P L I C A T I O N S
n
External storage connections
n
Mid to high-end servers
n
Cloud computing
T Y P I C A L U S E S
n
Tiered SATA and SAS RAID systems
n
Large-scale external JBOD enclosures
n
Storage expansion
K E Y F E A T U R E S
n
6Gb/s per port data transfer rate
n
Four x4 Mini-SAS external
connectors (SFF8088)
n
x8 PCI Express 2.0 host interface
n
Allows up to 512 SAS or SATA
endpoint devices
n
High performance IOP
n
PowerPC 440 @ 800MHz
n
Power management support
n
Supports SSP, SMP, STP and
SATA protocols
n
Consistency Check
n
Hot Spare Support
n
S.M.A.R.T. error detection
n
Supports SSDs, HDDs and tape drives
n
Environmentally-friendly due to low
power consumption
LSI SAS 9200-16e
K E Y A D V A N T A G E S
n
Fast performance with 6Gb/s data transfer rates
n
Industrys highest connectivity for external connections
n
PCI Express 2.0 host interface drives superior system performance
n
Flexible SATA+SAS array support optimizes costs
n
Fusion-MPT™ Architecture delivers more than 400,000 I/Os per second
6Gb/s SATA+SAS Advantage
The LSI SAS 9200-16e host bus adapter (HBA)
enables large-scale storage arrays through
high-speed 6Gb/s ports, supporting up to 512
SATA and SAS physical devices. It bolsters high
capacity external server storage RAID and non-
RAID enclosures by pairing a x8 PCI Express 2.0
host interface with four external x4 SFF8088
Mini-SAS connectors.
6Gb/s SAS technology enhancements, such as
End-to-End CRC, power management, and hot
plug support, combine to produce an extremely
powerful yet dependable solution. Additionally,
the T-10 Protection Model delivers early
detection of and recovery from data corruption
and Spread Spectrum Clocking reduces EMI
reductions. Other new features include greater
signal integrity and longer cables using Decision
Feedback Equalization and support for more
sophisticated SAS topologies using Expander
Self-discovery/Self-conguration.
Flexible to Fit Your Needs
LSI SATA+SAS HBAs build upon previous
generations of industry-leading LSI SAS
technology, delivering performance and power
saving advantages along with the added
assurance gained from robust interoperability
testing. Built to handle the constantly changing
and complex requirements of enterprise storage,
LSI HBAs eortlessly manage the need for larger
capacity, greater density and scalability.
The LSI SAS 9200-16e works easily with SATA
and SAS, hard disk drives, solid state drives, and
tape drives. It also doubles the performance
of previous generation SATA+SAS HBAs and is
optimal for driving cost-eective and reliable
scalability in today’s data centers.
Leading the Way
Since the inception of SAS, LSI has delivered
innovative products across its extensive
portfolio of controller ICs, expanders, HBAs,
motherboard solutions and storage systems.
By offering best-in-class SAS technologies,
broad interoperability and single one-stop
vendor support, the LSI SATA+SAS portfolio
uniquely addresses the full spectrum of server,
For more information and sales oce locations, please visit the LSI web sites at:
lsi.com lsi.com/channel
LSI, LSI and Design logo and Fusion-MPT are trademarks or registered trademarks of LSI Corporation. All other brand and product names may be
trademarks of their respective companies.
LSI Corporation reserves the right to make changes to any products and services herein at any time without notice. LSI does not assume any
responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in
writing by LSI; nor does the purchase, lease, or use of a product or service from LSI convey a license under any patent rights, copyrights,
trademark rights, or any other of the intellectual property rights of LSI or of third parties.
Copyright ©2010 by LSI Corporation. All rights reserved.
June 2010
workstation and enterprise storage architecture
requirements for implementing complete
SAS solutions.
LSI has supplied leading edge serial technology
to systems throughout the world for over seven
generations, making LSI the most experienced
enabler of serial interconnect for storage in the
world. Integrators can be assured that their LSI
adapter is providing the most advanced and
robust serial technology available.
Operating System Support
The LSI SAS 9200-16e host bus adapter supports
Microsoft® Windows®, Linux® (SuS, Red
Hat®), Solaris®, and VMware operating systems.
All OS drivers are backed by extensive testing
and validation to ensure optimum
system performance.
For a list of the most current supported drivers,
visit lsichannelgateway.com/support..
L S I S A S 9 2 0 0 - 1 6 e H O S T B U S A D A P T E R
PCI Bus 8-lane, 5 GT/s PCI Express 2.0
PCI Modes Bus Master DMA
PCI Data Burst Transfer Rates Half Duplex
X8 PCIe 4000 MB/s
Full Duplex
X8 PCIe 8000 MB/s
SAS Bandwidth Half Duplex
Single Lane – 600MB/s
Wide port (2 lanes) – 1200MB/s
Wide port (3 lanes) – 1800MB/s
Wide port (4 lanes) – 2400MB/s
Wide port (2x4) – 4800MB/s
Full Duplex
Single lane – 1200MB/s
Wide port (2 lanes) – 2400MB/s
Wide port (4 lanes) – 4800MB/s
PCI Card Type 3.3V Add-in Card
PCI Voltage +12V ±10%
PCI Form Factor 8.17” x 4.2”
PCI Power 13.5W
Brackets Full Height
Certication Level PCI Express 2.0
I/O Bus 4 x 4 6Gb/s SATA and SAS ports
SAS Controller LSISAS2116
Connectors External
Four x4 Mini-SAS SFF8088
Max Number of Physical Devices Non-RAID 512
Environments Operating
0°C to 60°C
5 to 90% Non-condensing
Storage
-45°C to 105°C
5 to 90% Non-condensing
MTBF >2,000,000 Hours
Compliances EMC: Class B-US (CFR 47, P15B); Canada (ICES-003); Japan (V-3/02.04); Europe (EN55022/EN55024); Australia/
New Zealand (AS/NZS 3548); Safety: EN60950
OS Support
Microsoft® Windows®, Linux® (SuS, Red Ha), Solaris®, VMwar. See www.lsi.com/support for details on versions.
Ordering Information LSI SAS 9200-16e Single Pack P/N: LSI00189
Warranty 3 years, advanced replacement option, free advanced technical support at lsi.com/support
  • Page 1 1
  • Page 2 2

LSI LSI00189 Datasheet

Category
Interface cards/adapters
Type
Datasheet

LSI LSI00189 is a high-performance, 16-port SAS/SATA host bus adapter that enables large-scale storage arrays with data transfer rates up to 6Gb/s per port. It supports up to 512 SAS or SATA devices, making it ideal for tiered SATA and SAS RAID systems, large-scale external JBOD enclosures, and storage expansion. With its x8 PCI Express 2.0 host interface and four external x4 SFF8088 Mini-SAS connectors, the LSI LSI00189 delivers superior system performance and flexible SATA+SAS array support, optimizing costs and maximizing storage capacity.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI