Kingston Technology KT-KVR800D2N6/2G Datasheet

Kingston Technology
Brand
Kingston Technology
Model
KT-KVR800D2N6/2G
Category
Memory modules
Type
Datasheet
Memory Module Specification
DESCRIPTION:
This document describes ValueRAM's 256M x 64-bit 2GB (2048MB) DDR2-800 CL6
SDRAM (Synchronous DRAM) memory module. The components on this module include
sixteen 128M x 8-bit DDR2-800 SDRAM in FBGA packages. This 240-pin DIMM uses gold
contact fingers and requires +1.8V. The electrical and mechanical specifications are as
follows:
FEATURES:
Clock Cycle Time (tCK) CL=6 2.5ns (min.) / 8ns (max.)
Row Cycle Time (tRC) 60ns (min.)
Refresh to Active/Refresh Command Time (tRFC) 127.5ns
Row Active Time (tRAS) 45ns (min.) / 70,000ns (max.)
Single Power Supply of +1.8V (+/- .1V)
Power 2.016 W (operating)
UL Rating 94 V - 0
Document No. VALUERAM0598-001.A00
01/22/07
Figure 1: KVR800D2N6/2G 240-Pin DIMM
KVR800D2N6/2G
2GB 256M x 64-Bit DDR2-800
CL6 240-Pin DIMM
Units: millimeters
2.50
1.00
0.20
2.50±0.20
5.00
4.00
1.50±0.10
0.80±0.05
4.00
3.80
3.00
4.00
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
  • Page 1 1

Kingston Technology KT-KVR800D2N6/2G Datasheet

Kingston Technology
Brand
Kingston Technology
Model
KT-KVR800D2N6/2G
Category
Memory modules
Type
Datasheet
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents