Vibe ISOAWK2M User manual

Brand: Vibe

Model: ISOAWK2M

Type: User manual

This manual is also suitable for

Vibe ISOAWK2M is a Rapid Fit Wiring Kit designed for VIBE Powerbox400.1M-V7. It enables quick and easy installation of the amplifier, providing the necessary connections to the fuse box, chassis ground, and the amplifier's fuse. The kit ensures proper polarity to deliver optimal bass performance and eliminates the need for a remote turn-on wire connection. Please refer to the included instructions for detailed installation guidance.

Connections

RAPAWK2.5M / RAPAWK5M

Rapid Fit Wiring Kit

Installation instructions for VIBE

Powerbox400.1M-V7

Ensure that correct polarity is

observed or a lack of bass will

result.

Note : using this kit does not

require the remote turn on wire to

be connected to the amplier.

If you are unsure, please contact

your nearest authorised VIBE

dealer.

Chassis ground

Original system fuse

Connect to

fuse box

Powerbox 400.1M fuse

Max 30A

An aftermarket audio amplier will place an additional load on the vehicles charging system.

Most modern vehicles have sufcient capacity in the charging system as not all the electrical

components of the vehicle will be switched on at once.

Check the fuse rating of the amplier and use this as the peak current requirement.

Generally the continuous current draw will be a third of the peak current.

Attention

Limited Warranty

All VIBE products carry a full 12 month warranty, valid from the date of the

original receipt and proof of purchase (UK only). The online warranty card should be completed

within seven days of the original purchase date. The original receipt and packaging should be

retained for this twelve month period. If the product develops a problem any stage during the

warranty period, it should be returned to the point of purchase in it’s original packaging, and

complete with no items missing.

A full description of VIBE’s warranty information can be found on our website:

www.vibeaudio.co.uk

What Is Not Covered

• Damage to product due to improper installation.

• Subsequent damage to other components.

• Damage caused by exposure to moisture, excessive heat, chemical cleaners and / or UV

radiation.

• Damage through negligence, misuse, accident or abuse. Repeated returns for the same fault

may be considered abuse.

• Any cost or expense related to the removal and / or re-installation of the product.

• Damage caused by amplier clipping or distortion.

• Items repaired or modied by any unauthorised repair facility.

• Return shipping on non defective items.

• Products returned without a returns authorisation number.

Call 09067031420

Calls cost 50p per minute. Call costs correct at date of publication (01/02/12)

Hours of business 9.00am - 5.30pm GMT Monday - Friday.

All calls are recorded for training purposes.

MIDBASS Distribution

PO Box 11000

B75 7WG

UK Technical Enquiries

For international technical support please contact the distribution agent for your country.

Please visit www.vibeaudio.co.uk for more details.

International Technical Enquiries

Vibe ISOAWK2M User manual

Brand: Vibe

Model: ISOAWK2M

Type: User manual

This manual is also suitable for

Download PDF

report

Vibe ISOAWK2M User manual

This manual is also suitable for

Vibe ISOAWK2M User manual

Related papers

Other documents