ACR Electronics HydroFix™ HRU is a hydrostatic release unit designed to replace the HRU in your ACR Category I EPIRB. It comes with a keyed bracket adapter and a large cotter pin for easy installation. The HRU holds down the ejector spring, so take care to hold the spring in place during removal and installation of the new HRU to prevent injury. Mark the expiration date on the HRU calendar with an indelible marker. The HRU must be replaced two years from the install date or four years from the date of manufacture, whichever comes first.
ACR Electronics HydroFix™ HRU is a hydrostatic release unit designed to replace the HRU in your ACR Category I EPIRB. It comes with a keyed bracket adapter and a large cotter pin for easy installation. The HRU holds down the ejector spring, so take care to hold the spring in place during removal and installation of the new HRU to prevent injury. Mark the expiration date on the HRU calendar with an indelible marker. The HRU must be replaced two years from the install date or four years from the date of manufacture, whichever comes first.
ACR Electronics HydroFix™ HRU is a hydrostatic release unit designed to replace the HRU in your ACR Category I EPIRB. It comes with a keyed bracket adapter and a large cotter pin for easy installation. The HRU holds down the ejector spring, so take care to hold the spring in place during removal and installation of the new HRU to prevent injury. Mark the expiration date on the HRU calendar with an indelible marker. The HRU must be replaced two years from the install date or four years from the date of manufacture, whichever comes first.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI