2. Quoizel
  3. QFA6156WS
QFA6156WS

Quoizel QFA6156WS Installation guide

  • Hello! I have analyzed the provided installation guide for the Quoizel Ceiling Fan QFA6156WS. This document provides instructions on how to safely assemble, install, and operate the ceiling fan, including information on wiring, remote control usage, and blade reversal. I'm ready to answer your questions regarding the installation and functionality of this fan.
  • What should I do before starting the installation?
    What type of bulbs should I use?
    What should I do if I'm unsure about the electrical installation?
-of-15
Released Date: 2023-02-08
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
•RISK OF PERSONAL INJURY - DO NOT bend the blades when installing the fan, or cleaning the fan. Do not insert foreign objects in between
rotating fan blades.
• RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY - mount to outlet box marked (acceptable for fan support of 22.7kg(50lbs) or less)
and use mounting screws provided with the outlet box.
•All set screws must be checked, and re-tightened where necessary, before installation.
•After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one
side of the outlet box and the ungrounded conductor on the other side of the outlet box.
•Suitable for use with solid-state speed controls.
•use only with light kits marked suitable for use in damp locations.
•This unit weighs kg (1 . lbs).0 784.9
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
•Disconnect fixture from the power source before replacing bulbs or cleaning. Make sure the bulbs are given sufficient time to cool be before
removing.
TOOLS REQUIRED
CARE AND MAINTENANCE
WARNINGS AND CAUTIONS
INSTALLATION GUIDE FOR QFA6156WS
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage
the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at
www.quoizel.com.
AFixture Body
x1
PACKAGE CONTENTS
READ AND SAVE THESE INSTRUCTIONS
Fan Blade
x1
D
Blade
Assembly Nut
x1
ELED Bulb
x4
F
PACKAGE CONTENTS (PARTS BAG 1)
Screw
x2
EE
Spring Washer
x4
BB
Flat Washer
x4
CC
Wire Connector
[1pc replacement
connector included]
x3
DD Mechanical Screw
x2
FF
Lock Washer
x4
AA
Inner Backplate
[pre-assembled to ceiling
canopy of Fixture Body]
x1
G
Mounting Screw
[pre-assembled to ceiling
canopy of Fixture Body]
x4
H
Ring
x1
B
Lock Screw
[pre-assembled to
arms of Fixture Body]
x4
C
-of-25
PACKAGE CONTENTS (PARTS BAG )2
Screw
x1
KK
Spring Washer
x1
HH
Flat Washer
x1
II
Wall Anchor
x1
JJ
Fastener with
Set Screw
x1
LL
PACKAGE CONTENTS (PARTS BAG )3
Remote Control
Transmitter
x1
MM
9V Battery
x1
NN
Wall Bracket
x1
OO
Screw
x2
PP
INSTALLATION
1
Unfold Support Arms
3
Remove Inner Backplate from Fixture Body
1 2
Remove (2) Mounting Screws Remove Inner Backplate
3
Rotate Inner Backplate
2
Install Ring
-of-35
4
Install Fan Blade
1 2
Remove pin Attach fan blade
3
Install pin
5
Install blade assembly nut
4
Insert fan blade
INSTALLATION
AC IN L
AC IN N
TO MOTOR N
TO MOTOR L
FOR LIGHT
ON DIP
1 2 3 4
5
Install Battery to Remote Control Transmitter & Match the Codes on Receiver and Remote
1
2
OPERAT THE REMOTE AFTERE
INSTALLATION IS COMPLETED:
1. Light button :
Press it to turn on the lights. Press it
again to turn off the lights. Long press it,
the bulbs will be dimmable.
2. HI, MED, LOW, OFF buttons: To adjust
fan speed.
ON DIP
1234
Receiver
Remote
Remove the rubber
stopper from the
receiver. Then the
code must be the same
for both andreceiver
remote. Place the
previously removed
rubber stopper back in
the .receiver
1 2
Remove back cover Match the codes on eiver and remoterec
3
Connect battery
Battery
6F22 9V
Battery
6F22 9V
4
Install battery and back cover
Antenna
Ceiling Canopy
-of-45
INSTALLATION
7
Install Safety Cable
5/16” pilot hole
Optional: for
concrete ceiling
6
Install Inner Backplate
9/64” pilot hole
CEILING
Outlet box
Use wood screws
When securing to support
structure with approved
electrical outlet box. Drill
9/64” pilot holes.
Use machine screws
when securing to existing
ceiling fan-rated outlet box.
that supports of 50 lbs
(22.72 kg) or less.
8
Wiring
Blue wire from fixture
identified with the Label “LIGHT L”
White wire from fixture
identified with the Label “N”
Black wire from fixture
identified with the Label “MOTOR L”
White wire
from outlet box
Black (or Red) wire
from outlet box
Ground wire from Fixture
Bare, or Green
Ground wire
from outlet box
Green Ground Screw
on the Crossbar
Ground wire from Ceiling Canopy
Blue ire fromw receiver
with the Label “LIGHT L”
White Wire from receiver
with the Label “N”
ON
ON DIP
1 2 3 4
Black ire fromw receiver
with the Label “MOTOR L”
Black ire fromw
receiver with
the Label “AC L”
Black ire fromw
receiver with
the Label “AC N”
Receiver has been wired to fixture wires already.
Receiver
-of-55
INSTALLATION
9
Install Ceiling Canopy
Carefully tuck all wires inside of the ceiling canopy during installation.
1
Attach Ceiling Canopy to Mounting
Screws and Rotate it.
Install previously removed
mounting screws back.
2
10
Install Bulbs
Instal correct bulbs referringl four
to fixture markings and/or labels
for maximum wattage.
Recommended Bulb Type
(included):
11
Install Wall Bracket
WALL
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B LED
6W
12
Reverse Fan Blade (Optional)
Reverse Switch Information
Season
Summer
Winter
Rotation Direction Switch Position
Counterclockwise
Left
Clockwise
Right
Reversing
Switch
Your installation is now complete! Restore electricity and save this sheet for future reference.
Note:
1. If airflow is desired in the opposite direction, turn the
fan off and wait for the blades to stop turning.
2. Push the reverse switch to Left or Right completely.
/