ZEALOT S67 Wireless Bluetooth Portable Speaker User Guide
S67 Wireless Bluetooth Portable Speaker ZA-S67-20210906
iJOY IJSP210137 Wireless Bluetooth Speaker with Light Show User Manual
IJSP210137 Wireless Bluetooth Speaker with Light Show Warning: Changes or modifications not expressly approved
by the party responsible…
asimom EX70 Wireless Bluetooth Speaker User Manual
EX70 Wireless Bluetooth Speaker
NUBWO K13 Portable Bluetooth Wireless Speaker User Manual
HOW TO CONNECT
Your mood light speaker has a rechargeable battery built inside it so you can use it anywhere.
Connect the included USB cable to the USB port on your mood light speaker to begin charging it.
The other end of the USB wire should be connected to a 5V 1A USB wall charger or a USB port on your
computer.
FAQs
How can I tell when the battery in my Bluetooth speaker is full?
If the battery is fully charged, the CHARGE indicator won’t turn on. Depending on the model, the speaker’s
CHARGE indication could not turn on while it is being charged. The CHARGE indicator will turn on if the battery
is charging while the speaker is off.
Why won’t my Bluetooth pair?
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices.
For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going
to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.
How can my Bluetooth speaker be reset?
You should only need to do this briefly with most Bluetooth speakers. The power and Bluetooth buttons must be
pressed and held simultaneously in order for almost every Bluetooth speaker to be reset.
How can I set my small hifi’s time?
When the time begins to flash on the display, press and hold the CLOCK button on the remote control. The 12
hour and 24 hour clock modes can be switched by continuously pressing PROGRAM. To set the hour, push the
REW or FWD button, and to set the minutes, press the RREV or NEXT button.
How long should my Bluetooth speaker be charged?
How much time does it take Bluetooth speakers to charge? The charging process for speakers using AC mains
power typically takes 6 to 8 hours. A USB-charged speaker will take about 3–4 hours to completely charge.
What happens if a Bluetooth speaker is overcharged?
No, as soon as the charger and battery reach balance, the device will cut off the charging circuit.
How long does a new Bluetooth speaker take to charge?
The Bluetooth® speaker’s internal battery needs three (3) hours to fully recharge from a dead battery.
What does the red Bluetooth light mean?
Your headphones’ red or amber flashing usually indicates that the battery is getting low.
Why is my Bluetooth red and blue blinking?
It is in pairing mode and needs to connect to your device if the red or blue flashes. If you continue to hold down
the power button after it has turned on for a second, this may occur.
How can I make my Bluetooth speaker’s LED turn off?
To turn the lighting function on or off, press and hold the BATT (battery) button and LIGHT button inside the
speaker’s cap for around 3 seconds. The lighting function can be turned back on/off by pushing and holding the
button for an additional three seconds.
Related Manuals / Resources