2. Scanstrut
  3. SC24
SC24

Scanstrut SC24 Operating instructions

  • Hello! I'm a chat assistant and I've analyzed the installation instructions for SCANSTRUT radar guards SC24, SC25, SC26, SC27, and SC28. This document outlines how to properly mount the radar and radar guard, emphasizing the use of specific fixings and washers. I'm ready to answer any questions you might have about the installation process.
  • What type of bolts should be used to attach the radar guard?
    What is recommended to use under the bolt heads?
    What is recommended to prevent the fixing bolts from loosening?
Scanstrut Ltd. 1 Malt Mill, Totnes, Devon, UK TQ9 5NH Tel: +44(0)1803 863800 Fax: +44(0)1803 862223
e-mail: [email protected] website: www.scanstrut.com
Radar Guard - SC24, SC25, SC26, SC27, SC28
Installation Instructions
Fitting Radar Guards SC24, SC25, SC26, SC27, SC28
1. Once mast mount is fitted to the mast, install radar and radar guard.
2. Use the long fixing bolts supplied with the radar to attach the radar guard
and radar to the mast mount.
3. We advise the use of large washers under the bolt heads to spread the
load. We also advise the use of spring washers to prevent the fixing bolts
from loosening.
4. Fully tighten all fixings.
/