Telit LE910-NA1 LTE Cat. 1 Module User guide

Hello! I have reviewed the document regarding RF exposure requirements for the Digi XBee-Pro S2C radio module when combined with either the Telit LE910-NA1 or the Digi ConnectPort X2e. The document specifies important safety guidelines, such as the required 32 cm separation distance from human operators. I'm ready to answer any specific questions you have about this document.
What is the main purpose of this document?

What is the required distance between the combined product and human operators?

Which other products are allowed for collocated operation with XBee-Pro S2C module?

Addendum to Digi User Guide 90002002

RF exposure

NOTE:

The XBee-Pro S2C surface mount module has additional RF exposure requirements. These requirements

must be placed in the User Guide of the integrated (Digi customer) equipment.

1. The XBee-Pro S2C ZigBee surface mount radio module with FCC ID: MCQ-PS2CSM, IC:

1846A-PS2CSM has received approval for collocated operation with either of these two

products:

Manufacturer

Product name

FCC ID/IC

Telit

LE910-NA1 LTE /3G Module

FCC ID: RI7LE910NAV2

IC: 5131A-LE910NAV2

Digi International

ConnectPort X2e Wi-Fi

FCC ID: MCQ-X2EWIFI

IC: 1846A-X2EWIFI

2. The product containing XBee-Pro S2C surface mount module and the Telit

cellular module OR the XBee-Pro S2C surface mount module and the

ConnectPort X2e Wi-Fi product must be located 32 cm from human operators.

This distance was determined using the limits for “General Public (Uncontrolled

Environment)”.