2. EVOTECH
  3. Suzuki DL650
Suzuki DL650

EVOTECH Suzuki DL650 User manual

  • Hello! I've reviewed the installation instructions for the EVOTECH Mounting Kit PRN015152. This document includes comprehensive steps for assembling the kit, detailing the components and torque settings required. I'm ready to answer your questions about the device and its installation process.
  • What torque should be applied when tightening the bolts?
    How often should I inspect the bolts?
    What if the bike is involved in an accident?
Installation Instructions
Kit Contents PRN015152
2 x Mounting Brackets
A
2 x Bobbin Spacer
B
2 x Poly Washer
C
2 x Bobbin Head
D
2 x M12 Washer
E
2 x M12 x 105mm Caphead Bolt
F
4 x M8 x 50mm Caphead Bolt
G
Installation Instructions
1
Installation Instructions
2
Installation Instructions
3
A
Installation Instructions
4
G
Installation Instructions
5
G
Installation Instructions
6
Caution
Fully Tighten
35Nm
Installation Instructions
7
Caution
Fully Tighten
35Nm
Installation Instructions
8
C
B
Installation Instructions
9
F
E
Installation Instructions
10
D
Installation Instructions
11
Installation Instructions
12
Installation Instructions
13
Caution
Fully Tighten
40Nm
Installation Instructions
Repeat Stages
1 - 13 For Left
Hand Side
Installation Instructions
It is recommended that periodic inspections are made to
ensure that all bolts are tightend to the speciļ¬ed torque settings.
Should the bike be involved in an accident a thorough inspection
should be made and any components that have taken an
impact, no matter how small, be replaced
/