2. Invixium Access
  3. SE3200
SE3200

Invixium Access SE3200 User manual

  • Hello! I've reviewed the user manual addendum for the Invixium iClass SE reader, along with its collocated WiFiBT and 3G modules. This document specifies the minimum distance required during operation and the labeling requirements when these devices are used together and I'm ready to answer any questions you might have about the installation and usage of the device.
  • What is the minimum distance between the device and user body?
    What should be included on the label of host device?
    What is the minimum font size of the label?

iClassSEReaderUserManualAddendum#1
Addendum#1
WhenInvixiumiClassSEreader(FCCID:S38‐SE3200,IC:10891A‐SE3200)iscollocatedwiththefollowing
twotransceivers:
WiFiBT  FCCID:PPD‐QCNFA324 IC:4104A‐QCNFA324
3GModule FCCID:QIPEHS6 IC:7830A‐EHS6
Installationandusertrainingmustensurethatthedistancebetweenacompositedevicelikethisand
userbodymustbeatleast30cm.
Installationmanualforthecompositedevicemustemphasizethatthedistancebetweenthedeviceand
userbodymustbeatleast30cm.
LabellingGuidance:
AnyhostdevicehavingthethreeRFdeviceslistedabove(iClassSEReader,WiFiBTandthe3GModule:
MUSThavethefollowingtextonitslabel.
Contains:
FCCID:S38‐SE3200
IC:10891A‐SE3200
FCCID:PPD‐QCNFA324
IC:4104A‐QCNFA324
FCCID:QIPEHS6
IC:7830A‐EHS6
Thefontsizemustbeatleast6pts.
/