2. Eesyy
  3. JY-6-D
JY-6-D

Eesyy JY-6-D User manual

  • Hello! I've reviewed the user manual for the Mosquito Killer JY-6-D. This device uses a special light to attract flying insects and then eliminates them with an electric shock. The manual provides important safety instructions, usage guidelines, and maintenance tips to ensure you use it effectively and safely. I'm ready to answer any questions you have about the product.
  • Where can this product be used?
    Can this product be used outdoors?
    How should I clean the dead mosquitos from the net?
    What should I do before replacing the tube?
Instruction Manual
Product Name: Mosquito Killer;
Product Model: JY-6-D;
Please read the user manual carefully before using.
Dear users: Thanks for your using our electronic mosquito killer; the product is high efficient
modernly family mosquito eradication product, which is designed with lightweight, low
power consumption, safely and environmentally; there are not side effect, and could be use
whole year.
One. Shape and part name.
Cover
The front
Cover
PCB
Lamp
Storage Cover
On-off
The Back
High Voltage Grid
Two. Specification
Input Voltage: AC 85-265V~ 50/60Hz; Power: 4W
Net Voltage: More than 600V DC
Resistance: Less than 500Q; Leakage AMP: 0.1A
Three. Unique Advantage
1. Environmental friendly; no need to add any pesticide, clean, no poisonous, no stink, which
changed the situation of polluting the environment by using traditional mosquito eradication
product.
2. Attract the mosquito, flies etc insects by the special light of the tube, and kill them by the
electric shock once the flied into the metal net.
3. Mild light color, lower consumption lighting, good decoration, it can be used in whole
inner house, and very convenient.
4. Long lifespan, can be used continuously in a long time.
Four. Best using method and scope of application
1. Please turn on the switch before use.
2. The products can be used in the bedroom, living room, hotel, restaurant, and office etc.
where the products are allowed to be used indoor.
3. The products can be used only indoors, not outdoors, but not including the stack, stable
etc.
4. The product is designed with energy saving, decoration, and sleepy mild lighting, so it
shall avoid being used under the strong lighting environment; otherwise it will effect the
mosquito killing. The right method are below, for example, keep the house lighting off, and
use the products before sleeping, or turn off all strong lighting for 10-20 minutes, or keep
the products in the dark place while working or learning.
5. Suggested height of hanging, keep the products hanged in height of 1.2m, and 0.3m
against the wall.
6. It can help to kill the flies if add some bait into the metal net while in daytime.
7. To increase the killing rate, please clean the dead mosquito stick in the metal net. Please
keep the power off, open the base, and use the metal bar with insulation to discharge the
net, and after that, use soft brush clean it.
Five. Attentions
1. Please keep the gap of the net edge sealed.
2. Do not touch the net by fingers or conductive things.
3. Forbid to use the products in explosive place
4. Keep it power off before replace the tube. After power off, the net will remain a little of
electricity use the insulated metal bar to discharge the high voltage net, and then
disassemble the plastic base to replace the tube.
5. If use the lengthened wire, please keep the power away from the wet environment, and
avoid damaging the wire.
6. Do not pull the wire roughly; once find the wire damaged, please stop using the products,
and please send them to the professional repair center to repair them.
7. Keep the products away from the kids.
8. If the water of the garden sprays to the product, it will be in danger of electric shock.
9. The product is not waterproof (IPX0)
Six. Common failures & Treatment methods
1. Tube shinning: Voltage below level or the tube is working beyond the lifespan, which need
balance the voltage or change new tube
2. The gird is without high voltage: The metal net connected with each other or the
components broken, which need to have it repaired by professional service center.
Seven. Maintenance
1. Users shall wash the metal net in a frequently period, and shall keep the lamp powered off
while washing, and use the metal bar with insulation to discharge the net, and after that, use
soft brush clean it. Do not keep the product in the water.
2. Do not crash the metal net to avoid them connected and lose the function of mosquito
eradication.
3. Shall keep them carefully avoid shake them roughly; which may damage the tube or
components.
Warning
1. Check the local grid voltage if meet the products working voltage before using the
products.
2. High voltage dangerous.
3. The products only suit inner use.
4. The products could not be used in the garage, tank farm, stable, stack or some other place
where there are explosive things, and animals.
5. Keep the plug out before clean the net, use the brush clean the high voltage net and clean
the dead mosquito on the lamp every week.
6. Ensure power off before clean or repair the lamp.
7. Do not touch the high voltage net while the products are working, and keep them in the
place where the kids could not reach.
8. Do not wash the products by water, and keep them avoid of the rain.
9. To avoid the dangerous, please give the products to the manufacturer or the professional
repair center for the maintenance once they are broken or need change the tube.
/