2. EPH Controls
  3. CRTP2
CRTP2

EPH Controls CRTP2 User manual

  • Hello! I've reviewed the installation instructions for the EPH Controls CRTP2 Room Thermostat and can help answer your questions. This document covers important safety precautions, mounting options, and the process for setting up your thermostat. I am ready to assist with any specific questions you might have.
  • Who can install the thermostat?
    What should be done before starting any electrical work?
    Can non-qualified personnel open the thermostat?
For use in normal environments.
CRTP2 Room Thermostat Battery Operated Installation Instructions
Page 1 of 1
1
34
5 6
2
Before commencing any work on the electrical connections, you must rst disconnect the thermostat
from the mains.
None of the 230V connections must be live until the installation has been completed and the housing is
closed.
Only qualied electricians or authorised service sta are permitted to open the thermostat.
There are parts that carry mains voltage behind the cover. The thermostat must not be left unsupervised
when open. (Prevent non specialists and especially children from gaining access to it.)
If the thermostat is used in a way not specied by the manufacturer, its safety may be impaired.
Prior to setting the thermostat, it is neccessary to complete all required settings described in the section.
CAUTION! Installation and connection should only be carried out by a qualied
person and in accordance with national wiring regulations.
This thermostat can be mounted in the following ways:
1) To a recessed conduit box 2) To a surface mounted box 3) Directly mounted on wall
Important:
Keep this document
20221104_CRTP2_InsIns_PK
EPH Controls Ireland
technical@ephcontrols.com www.ephcontrols.com
EPH Controls UK
technical@ephcontrols.co.uk www.ephcontrols.co.uk
/