Talon CVD10: A compact and neat solution for concealing unsightly pipework, available in a 10mm double style. Designed to be used with Talon Hinged Clips, it can also be fitted directly onto Talon Pipe Cover Backplates for installations without Hinged Clips. Spacing between backplates should be no more than 1 meter apart. The Pipe Cover is fully adaptable for use with non-Hinged Clip specifications.
Talon CVD10: A compact and neat solution for concealing unsightly pipework, available in a 10mm double style. Designed to be used with Talon Hinged Clips, it can also be fitted directly onto Talon Pipe Cover Backplates for installations without Hinged Clips. Spacing between backplates should be no more than 1 meter apart. The Pipe Cover is fully adaptable for use with non-Hinged Clip specifications.
Talon Pipe Cover Range
Pipe Cover Range
Pipe Cover Backplates
Colours & sizes
Talon Pipe Cover has been designed to oer
a compact, neat and easy solution where
unsightly pipework needs to be covered.
Available in 15, 22 & 28mm single and 10, 15
& 22mm double styles, it can be fitted
directly onto the Talon Hinged Clips.
Replaces fixing bracket for installations not involving Talon
Hinged Clips.
Spacing between back plates: No more than 1 meter apart.
B
A
A
B
B
AA
B
A
B
A
B
CVD22
22mm Double Pipe Cover
A: 40.7mm B: 78mm
CVS28
28mm Single Pipe Cover
A: 48mm B: 53mm
CVS15
15mm Single Pipe Cover
A: 33mm B: 33mm
ASBP15
for 15 & 22mm Single Cover
CVS22
22mm Single Pipe Cover
A: 40.7mm B: 43mm
CVD15
15mm Double Pipe Cover
A: 33mm B: 58mm
CVD10
10mm Double Pipe Cover
A: 25mm B: 46mm
ADBP15
for 15 & 22mm Double Cover
Version: 2
Page 1 of 8
15.03.19
Single Pipe Cover
3m 2.5m & 3m
Double Pipe Cover
White
Information Sheet No. 3A - © Talon Manufacturing
Talon, Units 2 to 5 Chieftain Close, Gillingham Business Park, Kent, ME8 0PP
Tel: 01634 268811 ◦ Fax: 01634 268812 ◦ Email: sales@talon.co.uk ◦ Web: www.talon.co.uk
How to -Talon Pipe Cover
How to install Talon Pipe Cover
Step 1
Required for Install...
Step 3
Step 2
Talon Pipe Cover is specially designed to grip and hold
Talon Hinged Clips. Cover is available for single or
double pipe installations. Pipe Cover is fully
adaptable for use with non Hinged Clip
specifications (see page 3 TBC)
Drill holes then install Talon Hinged
Clips & Talon Wall Plugs with screws on
fixing surface. Space clips no more than
500mm apart along the Pipe Cover.
Push the Pipe Cover and Hinged Clip fixing
points together to close the installation.
Repeat for additional coverings adding
Talon extension accessories where needed.
Typical parts required to install a
length of Pipe Cover includes;
●Talon Hinged Clips
●Talon Red or Brown Wall Plugs
●Size 10 countersunk screws
●Installation pipework.
Install pipe then place Pipe Cover over
Hinged Clips. Note the cover fixing
points are specially designed to grip the
side lugs of Talon Hinged Clips.
Fixing
point B
Fixing
point A
Version: 2
Page 2 of 8
15.03.19
For more information on Pipe
Cover Accessories,
see data sheet.
Information Sheet No. 3A - © Talon Manufacturing
Talon, Units 2 to 5 Chieftain Close, Gillingham Business Park, Kent, ME8 0PP
Tel: 01634 268811 ◦ Fax: 01634 268812 ◦ Email: sales@talon.co.uk ◦ Web: www.talon.co.uk
How to - Pipe Cover Backplates
Pipe Cover Backplates
Version: 2
Page 3 of 8
15.03.19
Step 1
Required for Install...
Step 3
Step 2
Drill required holes and fix the backing
plates and pipe clips. Backing plates
should be spaced no more than 500mm
apart along the pipe cover installation.
Place the pipe cover over the installation
and push fixing points together to finish the
installation. Repeat process for additional
Pipe Cover.
A typical cover installation
involving backing plates will
need additional fixings. Backing
plates required;
● Talon Open Clips or other clips
fit for a pipework install.
● Talon Red or Brown Wall Plugs
● Size 10 countersunk screws
Install the pipework. Note the backing
plate sits under the pipework. A minimum
gap of 7mm is required between the
fixing surface and the installed pipe.
Fixing
point B
Fixing
point A
For more information on Pipe
Cover Accessories, see data
sheets for more details.
Information Sheet No. 3A - © Talon Manufacturing
Talon, Units 2 to 5 Chieftain Close, Gillingham Business Park, Kent, ME8 0PP
Tel: 01634 268811 ◦ Fax: 01634 268812 ◦ Email: sales@talon.co.uk ◦ Web: www.talon.co.uk
Talon Pipe Cover Accessories
Pipe Cover Accessories
Single Pipe Cover Accessories
Double Pipe Cover Accessories
Talon oer a wide range of Pipe Cover
Accessories to fit to Talon Pipe Cover and
used in conjunction with Talon Skirting
Cover.
Version: 2
Page 4 of 8
15.03.19
15mm
10mm 22mm
Stop
End
Stop
End
Stop
End
Double
Backplate
Double
Backplate
Double
Backplate
Straight
Connector
Straight
Connector
Straight
Connector
Cross
Over T
Cross
Over T
Top
Access
Top
Access
20mm
Vent
Plug
20mm
Vent
Plug
20mm
Vent
Plug
Outside
Corner
Outside
Corner
Outside
Corner
Side
Access
Side
Access
70mm
Vent
Plug
70mm
Vent
Plug
70mm
Vent
Plug
Flat
Corner
Flat
Corner
Flat
Corner
Inside
Corner Inside
Corner
Inside
Corner
Swept
Bend
Guide
Swept
Bend
Guide
15mm10mm 22mm
Stop
End
Single
Backplate
Stop
End
Stop
End
Colours & sizes
All Pipe Cover Accessories
White
Information Sheet No. 3A - © Talon Manufacturing
Talon, Units 2 to 5 Chieftain Close, Gillingham Business Park, Kent, ME8 0PP
Tel: 01634 268811 ◦ Fax: 01634 268812 ◦ Email: sales@talon.co.uk ◦ Web: www.talon.co.uk
Talon Pipe Cover Accessories
10mm Double Pipe Cover Accessories
C
B
A
B
D A
CA
D
C
B
AD10SE (10mm)
Stop End
A: 20mm B: 49.2mm
C: 26.5mm
AD10IC (10mm)
Inner Corner
A: 43mm B: 49.2mm
C: 26.5mm D: 43mm
B
A
D
C
AD10FC
Flat Corner
A: 65.7mm B: 49.2mm
C: 26.5mm D: 65.7mm
AD10OC
Outer Corner
A: 43mm B: 49.2mm
C: 26.5mm D: 43mm
Single Pipe Cover Accessories
C
B
A
C
B
A
C
B
A
AS28SE (28mm)
Stop End
A: 30mm B: 56.4mm
C: 49.6mm
AS22SE (22mm)
Stop End
A: 30mm B: 48.4mm
C: 41.8mm
AS15SE (15mm)
Stop End
A: 24.8mm B: 37.8mm
C: 34.3mm
Version: 2
Page 5 of 8
15.03.19
Information Sheet No. 3A - © Talon Manufacturing
Talon, Units 2 to 5 Chieftain Close, Gillingham Business Park, Kent, ME8 0PP
Tel: 01634 268811 ◦ Fax: 01634 268812 ◦ Email: sales@talon.co.uk ◦ Web: www.talon.co.uk
Talon Pipe Cover Accessories
15mm Double Pipe Cover Accessories
A
D
C
B
B
A
D
C
A
C
B
B
D A
C
B
CA
C
B
A
AD15OC
Outer Corner
A: 54mm B: 60.5mm
C: 34mm D: 54mm
AD15FC
Flat Corner
A: 80mm B: 60.5mm
C: 34mm D: 80mm
A
C
B
C
B
A
AD15SA
Side Access
A: 50mm B: 60.5mm
C: 34mm
AD15CT
Crossover T Connector
A: 135mm B: 60.5mm
C: 63mm
AD15TA
Top Access
A: 50mm B: 60.5mm
C: 34mm
AD15IC
Inner Corner
A: 54mm B: 60.5mm
C: 34mm D: 54mm
AD15SC
Straight Connector
A: 40mm B: 60.5mm
C: 34mm
AD15SE
Stop End
A: 25mm B: 60.5mm
C: 34mm
Version: 2
Page 6 of 8
15.03.19
Information Sheet No. 3A - © Talon Manufacturing
Talon, Units 2 to 5 Chieftain Close, Gillingham Business Park, Kent, ME8 0PP
Tel: 01634 268811 ◦ Fax: 01634 268812 ◦ Email: sales@talon.co.uk ◦ Web: www.talon.co.uk
Talon Pipe Cover Accessories
22mm Double Pipe Cover Accessories
A
D
C
B
B
A
D
C
A
C
B
B
D A
C
B
CA
C
B
A
AD22OC
Outer Corner
A: 67mm B: 82mm
C: 41mm D: 67mm
AD22FC
Flat Corner
A: 106mm B: 82mm
C: 41mm
A
C
B
C
B
A
AD22SA
Side Access
A: 60mm B: 82mm
C: 41mm
AD22CT
Crossover T Connector
A: 165mm B: 82mm
C: 73mm
AD22TA
Top Access
A: 60mm B: 82mm
C: 41mm
AD22IC
Inner Corner
A: 67mm B: 82mm
C: 41mm D: 106mm
AD22SC
Straight Connector
A: 40mm B: 82mm
C: 41mm
AD22SE
Stop End
A: 30mm B: 82mm
C: 41mm
Version: 2
Page 7 of 8
15.03.19
Information Sheet No. 3A - © Talon Manufacturing
Talon, Units 2 to 5 Chieftain Close, Gillingham Business Park, Kent, ME8 0PP
Tel: 01634 268811 ◦ Fax: 01634 268812 ◦ Email: sales@talon.co.uk ◦ Web: www.talon.co.uk
Talon Pipe Cover Accessories
How to - Pipe Cover Accessories
Additional Accessories
B
A
C
B
A
A
B
AK105T15 (15mm)
Skirting Cover T Connector
A: 150mm B: 62mm
C: 85mm
AVP70
70mm Vent Plug
A: 1.75mm B: 80mm
Drill hole size = 70mm
AVP20
20mm Vent Plug
A: 2mm B: 23.5mm
Drill hole size = 20mm
Version: 2
Page 8 of 8
15.03.19
Pipe Cover wall assembly example Pipe Cover to skirting cover assembly example
Pipe Cover
Stop End
Flat Corner
Crossover T
Connector
Outer
Corner
Skirting
Cover Skirting
Outer
Corner
Skirting
Inside
Corner
Outer
Corner
Inner Corner
Crossover T
Connector
Inner Corner Pipe Cover
Skirting Crossover
T Connector
Talon Pipe Cover Accessories combine in a variety of ways to cover installation work.
Accessories are easy fit using uPVC Solvent Weld Glue. The Skirting Crossover T Connector
allows Talon Skirting Cover to be connected to Talon Pipe Cover.
Information Sheet No. 3A - © Talon Manufacturing
Talon, Units 2 to 5 Chieftain Close, Gillingham Business Park, Kent, ME8 0PP
Tel: 01634 268811 ◦ Fax: 01634 268812 ◦ Email: sales@talon.co.uk ◦ Web: www.talon.co.uk
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Talon CVD10: A compact and neat solution for concealing unsightly pipework, available in a 10mm double style. Designed to be used with Talon Hinged Clips, it can also be fitted directly onto Talon Pipe Cover Backplates for installations without Hinged Clips. Spacing between backplates should be no more than 1 meter apart. The Pipe Cover is fully adaptable for use with non-Hinged Clip specifications.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Vaillant TURBOmax VUW 242 E Instructions For Installation And Servicing
-
-
Bose 901® Series VI loudspeaker system User manual
-
-
Raychem AT-TS-13 Installation guide
-
Hochiki SDP-3 User manual
-
Jayco TALON ZX Owner's manual
-
Cistermiser 42528 Novatap Infrared Deck Mounted Basin Tap Chrome Installation guide
-
Cooper Lighting Area Luminaire User manual
-
