komodo KD2PCINFKYA User guide

Brand: komodo

Model: KD2PCINFKYA

Type: User guide

This manual is also suitable for

KD3PCINFKYA 2-3 Person Inflatable Cruising KAYAK

The Komodo KD2PCINFKYA is a 1-2 person inflatable cruising kayak designed for use on lakes, rivers, and calm coastal waters. It features a durable PVC construction, two adjustable seats with removable covers, and two paddles for easy maneuverability. The kayak also has a removable fin for added stability and tracking, and a drain valve to keep the interior dry. With a weight capacity of 400 pounds, the Komodo KD2PCINFKYA is perfect for a variety of paddling activities, from leisurely cruises to fishing excursions.

1-2 PERSON INFLATABLE

CRUISING KAYAK

KD2PCINFKYA

WARNINGS:

To ensure optimum operation of this product, please follow these instructions:

• Before using the product, read this user guide carefully. This guide is part of the

product, keep it for future reference. Familiarise yourself with the features of the kayak

and ask for professional training if you are inexperienced in handling this type of kayak.

• IMPORTANT: Keep this manual with the kayak (in a dry place) and retain it for all future

use. If you sell this kayak, ensure it is passed on to the new owner.

• A Personal Flotation Device (PFD) is required for each occupant. Children and non-

swimmers must wear a personal flotation device at all times. Children and non-

swimmers need special instruction in the use of PFD.

• Kayak practice can be dangerous and physically exhausting. Non-compliance with

safety standards, improper use of the board, non-compliance with using

recommendations can cause serious injuries or irreversible damage. Wearing a

lifejacket is mandatory.

• Please observe carefully the information on the capacity plate which is printed on the

item.

• The product is equipped with protection systems to guarantee user safety.

Nevertheless, please read the safety instructions and use the product as described in

this guide to avoid risk of injury related to use of the product.

• Maintenance work and repairs on the kayak should be implemented only by qualified

personnel. Contact help.Kogan.com if further assistance is required.

• If this is your first kayak, or you are not familiar with this type of kayak, please ensure that

you obtain handling and operating experience before operating. If unsure of instructors

in your area, contact local boat shops, sailing groups or yacht clubs for

recommendations.

Recommendations

• Do not overestimate your physical condition: your strength, your endurance and your

skills

• Do not overestimate your technical capabilities

• Be careful never to under estimate the forces of nature.

• Do not exceed the authorised number of persons or weight.

• Check the good operating condition of your equipment before each use.

• Refer to access, ride and traffic regulations, on practice sites selected and hazards

related to this sport or water activities.

SAFETY & WARNINGS

• Learn about your kayaking area. Ask locals about tides and currents.

• Check weather forecasts, sea conditions (tides, currents, pollution, protected areas),

water body condition (floods, pollution, protected areas)

• Take into account the other users of the aquatic environment (surfers, swimmers,

fishermen…)

• Check out regulations of sites you operate in.

• Dress appropriately for weather conditions.

• Kayak must not be used by a child aged less than 12 years old.

• Kayak must not be used by a child aged between 12 and 18 years old without adult

supervision.

• Ensure Kayak has even weight distribution of persons or loads in the boat.

IMPORTANT! WARNING:

For the safety of the operator and others in the vicinity of the kayak during operation, always

strictly observe the following safety warnings:

• This is not a life-saving device.

• Use only under competent supervision.

• Never allow diving into this kayak.

• Never leave in or near the water when not in use.

• Never tow from any vehicle.

• Using a paddle leash will help prevent you being separated from your paddle if you

capsize.

• It is highly recommended that all occupants wear a helmet.

• Adult assembly and operation required.

• Excessive inflation of the kayak can cause the chambers to burst or cause damage to

the welded seams.

• Review all safety requirements regularly. Never navigate alone.

• Be careful when stepping or climbing aboard the kayak. Step into the centre of the

kayak for maximum stability. Distribute the weight of gear, tackle box and accessories

evenly so that the kayak sits even front to back and side and side. Uneven distribution of

persons or loads in the kayak can cause capsizing and drowning.

• Do not use your kayak if you suspect a puncture or leak. It might be unsafe.

• Failure to follow these guidelines may result in drowning, paralysis or other serious

injuries.

• WARNING: Beware of offshore winds and currents. These could be unsafe conditions.

• WARNING: It is the responsibility of the kayak operator to identify and obey all local and

state laws about kayak safety and required safety equipment. Please consult your local

authorities to ensure compliance.

• Do not allow unattended children in the kayak. Always make sure that at least one

responsible adult is supervising all children and those who do not know how to swim.

• Always maintain the proper kayak safety equipment in an easily accessible place in your

kayak. Indicate emergency phone numbers as well as safety advisories and rules (such

as “No jumping or Diving”)

• The total number of occupants and total weight shall not exceed the information

printed on the kayak. Exceeding the data given on the capacity plate can cause

capsizing and drowning.

• The kayak is designed to be storable, seasonal boat. If you live in a temperate area in

which the boat will not be in use all-year-round, it is strongly recommended that you

deflate the kayak and dry it thoroughly and store it in a protected area for the off-

season. This will help extend your kayak and prevent a safety hazard from developing

while the kayak is not in use.

Do not kayak under offshore

wind and winds exceeding

wind force of 4 on Beaufort

scale. Do not kayak with

waves exceeding 0.5m.

Wearing lifejacket is

mandatory.

Kayak is a beach craft; you

cannot get away more than

250m from the coastline.

Never kayak alone;

inform someone of your

kayaking route and

time.

Removable Fin

• Fitting of the fin is recommended whenever you use your kayak in deep water (lake, sea,

etc.), where it helps keep the kayak in a straight line. Fitting of the fin is not

recommended for use in shallow water or white water. The fin would be likely to

damage the bottom of the kayak in shallow water and would reduce manoeuvrability in

white water. The bow and stern lines of the kayak have been designed to ensure good

handling without the fin.

• We recommend to add your fin before inflation and remove it after inflation.

• To attach, slide fin into slot on bottom of kayak.

Kayak

Removable fin

Paddles (x2)

Adjustable seats (x2)

Pressure gauge

Dual action

hand pump

Repair kit

Carry bag

COMPONENTS

Pressure Gauge

SF adapter suitable for Boston valve (screw type)

BV adapter suitable for transparent pinch valves (Push-in type)

• Unit of manometer scale ranges: 0 to 1Bar/0 to 15PSI

• The manometer comes with 2 types of adapters that fits with Boston valves and Pinch

valves for simple inflatable measurement.

WARNING: Always use the pressure gauge to avoid overinflation and

possible sever damage.

OVERVIEW

Inflation

Inflatable Cruising Kayak is provided with a dual action hand pump, equipped with a nozzle

pipe fitting valve in the back. We advise you to flex your knees for a better comfort while

inflating.

• For the first inflation and in order to get acquainted with your new product, inflate

indoors at room temperature where the PVC will be soft and assembly process will be

easier. Any use of an air compressor will damage your product.

• Choose a smooth and clean surface to unfold your kayak.

• If it was stored at a temperature below 0°C, leave it at 20°C for 12 hours before

unfolding.

• Inflate it using the provided pump or any inflator designed for inflatable boats, rafts,

pool floats, air beds, camping mattresses, other low-pressure inflatables. These types of

inflators will have a hose and adapters to fit the valves on this product.

1. Your kayak is equipped with three Boston

valves

1.1 See figure: Unscrew the valve cap (1).

1.2 Screw the valve inserts (2) onto the base

(3) and ensure that the valve cap remains

accessible.

2. Insert the pump hose end piece and inflate it

until you will reach the required pressure (0.1

bar/ 1.5 PSI). After inflation secure all the

valve caps tightly by rotating clockwise.

3. Inflate the kayak in the order of inflation as shown on the capacity plate printed on the

product.

ASSEMBLY

(1) Valve Cap

(2) Valve Insert

(3) Valve Base

Note: A slight air-leak before screwing the valve caps is normal. Only the valve caps

can ensure proper AIR TIGHTNESS.

WARNING: Any use of a high-pressure compressor is prohibited.

Kayak could suffer irreparable damage. Do not use any sharp tools.

4. The correct pressure for this item is: 0.1 bar / 1.5 PSI (= 100 mbar). Do not exceed it.

5. Check the pressure using the supplied pressure:

o If the pressure is above 1.5 PSI, deflate the kayak until you reach the

recommended pressure.

o If the pressure below 1.5 PSI, inflate again slightly.

Adjustable Seats with Removable Cover

• Your kayak is supplied with two adjustable seats with removable cover, that feature

comfortable high backrests. The seats are held in place by the Velcro strips on the

underside and by webbing straps on the sides of the backrest.

• Place the seats into the kayak, matching the position of the Velcro strips on the floor.

Attach the webbing straps from the sides of the backrest to the D-rings located inside

the kayak, on the side walls/chambers. Tighten the straps as needed for proper back

support. You can choose adjust seat position for one or two passengers.

Paddles

When assembling the paddles, ensure the tube with three holes is in the middle.

Drain Valve

• Your kayak has been designed with a drain system located on the underside of the

kayak in the rear. The valve the lower part of the body getting wet when the kayak is

used in calm water. It may be a little difficult to insert the plug in the drain orifice. The

tight fit retains the plug until it is removed, for example, when the kayak is to be used in

white water.

• The self-draining bottom is a considerable advantage in white water: it allows rapid

removal of water from inside the kayak and thus improves its performance; it is also an

additional safety feature, as a kayak filled with water is difficult to manoeuvre

Note:

Before inflating your kayak, you can either close the drainage orifice to stay dry or open

it to allow any water to drain out.

Note: If you leave your kayak exposed to the sunlight, check the pressure and deflate it

slightly, otherwise the material may become overstretched. The ambient temperature

affects the tube’s internal pressure: a temperature increase of 1°C causes a variation of

the pressure in the tube of +/- 4 mBar.

Checking the Air Pressure

Boston valve (screw type):

1. Simply screw in the pressure gauge on top of the

adapter A,

2. Insert adapter pin into the valve, rotate it slightly until

the metal pin slides into one of the holes; the insert it

completely.

3. Once the manometer is well positioned, the pressure

level is indicated on the face of the manometer. Adjust

the inflation/deflation if necessary and repeat the

operation.

Transparent pinch valves (push-in type):

1. Simply screw in the pressure gauge on top of the

adapter B,

2. Insert adapter pin into the valve until the valve is

completely plugged up.

3. Once the manometer is well positioned, the pressure

level is indicated on the face of the manometer.

Adjust the inflation/deflation if necessary and repeat

the operation.

WARNING: Never exceed a pressure level 0.1 bar / 1.5 PSI.

OPERATION

Preparation before departure

Acquire the necessary information and inform other passengers:

1. Get information on local laws, regulation and hazards related to water activities

and kayak operation.

2. Check the weather forecast, local currents, tides and wind conditions.

3. Advise someone on the land of the time you plan to be back.

4. Determine the distance you can cover and remember that bad weather conditions

can alter this.

Check the working condition of the kayak and equipment:

1. Check inflation pressure.

2. Check all safety valves.

3. Check the load is evenly distributed on the deck of kayak: front to back and side to

side.

4. That the footrest will not entangle the feet of the occupants in the event of a

capsize.

Check that required safety equipment is onboard (Check your local/regional laws and

regulations for the location in which you’re kayaking)

1. One personal flotation device (PFD) for each occupant.

2. The air pumps, oars, repair kit.

3. The mandatory equipment.

4. This user guide and any necessary licenses / paperwork that may be required.

5. Lights are required if operating after dark.

Rules to observe during navigation

1. Be responsible and strictly follow the safety rules. Do not neglect the safety rules;

this could endanger your life and lives of others.

2. Learn to keep control of your kayak.

3. Respect local regulations and practices.

4. Navigate on “sheltered water” only.

5. Keep fire away. Do not smoke on board. Ash and fire can puncture the kayak.

6. Remember weather conditions can rapidly deteriorate. Always be sure that you can

reach shelter rapidly.

7. Neither the operator or passengers shall be inebriated while using the kayak. This

includes, but is not limited to, being under the influence of alcohol, drugs, or strong

medications.

8. Make sure to remain seated inside the kayak at all times.

9. No bow-riding. Riding on the edge/outside of the vessel is extremely dangerous

and can lead to capsizing and drowning.

10. Be very careful when landing. Arms and legs might be hurt when hanging off the

kayak.

11. Always avoid areas where divers/swimmers are in the water. Keep a sharp lookout

especially when operating near beaches and launch sites. The Alpha flag indicates

the proximity of divers. You MUST stay at a good distance (minimum 50 meters).

• Remove oars/paddles and other accessories.

• To deflate, unscrew the valves’ insert. Remove the fin.

• Clean and check the kayak as well as all the accessories after each use. Rinse it

thoroughly making sure to remove any residues of salt if used in salt water.

• Use a mild soapy solution, do not use detergents or any type of silicone-based

products. Make sure the product is completely dry before putting it away.

• Fold the 2 sides into the middle, then roll it up from the opposite end of the valves (so

remaining air can escape from the valves); start again if you feel there is still some air in

the tubes.

• When storing your inflatable, keep it in a clean and dry place that is not affected from

major variations in temperature and other damaging factors. You may store it deflated

and rolled up in the carry bag or assembled and lightly inflated (make sure you do not

subject it to deformations).

Repair

How to repair small punctures:

• You can repair small punctures with the included repair kit. Please note that in order for

the repair to be successful, the humidity level should be less than 60%, temperature

between 18°C-25° C. Avoid carrying out repairs in the rain or in direct sunlight.

• To remove the inside bladder(s) please open the zippers on the inside of the kayak

cover; each air chamber features a zipper at the bow and a zipper at the stern of the

kayak for quick and easy access. Check that the tube is fully deflated and lies flat.

1. Draw the shape of the patch exactly where it will be applied, cut a round patch at

least 2-5 cm larger than the cut/damaged area.

2. Clean the damaged area and the corresponding side of the patch with a grease

remover of the alcohol type and allow for it to dry for 5 minutes.

3. Apply 3 thin layers of glue on both the patch and the damaged area, allow for it to

dry for 5 minutes between layers until the glue feels tacky

CLEANING & CARE

WARNING: Tears or holes detected on sealing strips are not reparable

by the kit delivered. Cease use immediately and contact

help.Kogan.com for support.

4. When the third layer of glue is dry, apply the patch without pressing and adjust the

positioning if required, press the air bubbles which may have formed under the

patch by smoothing the patch with a round object such as a spoon, do this

procedure by starting in the centre of the patch towards the outside, clean the

excess glue with a solvent. Drying: 12 hours.

WARNING: Avoid glue contact with the skin or the eyes. Keep glue

away from the reach of children. Perform all of your repairs in a dry,

temperate and well-ventilated area.

NOTES

Need more information?

We hope that this user guide has given you

the assistance needed for a simple set-up.

For the most up-to-date guide for your product,

as well as any additional assistance you may require,

head online to help.kogan.com

komodo KD2PCINFKYA User guide

Brand: komodo

Model: KD2PCINFKYA

Type: User guide

This manual is also suitable for

KD3PCINFKYA 2-3 Person Inflatable Cruising KAYAK

Download PDF

report

komodo KD2PCINFKYA User guide

This manual is also suitable for

komodo KD2PCINFKYA User guide

Other documents