Displaypros 1010 is a freestanding lightbox, measuring 10 feet wide by 10 feet high, with a durable aluminum frame in your choice of silver, white, or black. It features perimeter and interior LED light bars that make the box glow, powered by an internal power supply to minimize shadowing and cord management. Choose from backlit textile (dye-sublimation printed) or intensity (UV/LED printed) backlit graphic material.
Displaypros 1010 is a freestanding lightbox, measuring 10 feet wide by 10 feet high, with a durable aluminum frame in your choice of silver, white, or black. It features perimeter and interior LED light bars that make the box glow, powered by an internal power supply to minimize shadowing and cord management. Choose from backlit textile (dye-sublimation printed) or intensity (UV/LED printed) backlit graphic material.
Powder coat color options:
Blaze Light Box 1010 - Freestanding
- 10'W x 10'H
- 6” light boxes feature a sleek, aluminum frame, available in white, black or silver
- Perimeter LED light bars are pre-attached to the frame
- Light bars feature an internal power supply, which means no separate power supplies within the frame
- Easy to assemble
- UL Certified & ADA compliant feet, 3/16”h, approved for public spaces
- 5 year LED warranty on lights; long life span - 43,800 hours for 5 years if powered 24/7
- Lifetime warranty on frame
- Comes in heavy duty box; hard-shell case is optional
Assembled unit:
120”w x 120”h x 21.65”d
3048mm(w) x 3048mm(h) x 549.91mm(d)
Approximate Weight:
175 lbs / 79.3787 kg
features and benefits:
dimensions:
Hardware Shipping
Graphics
additional information:
We are continually improving and modifying our product range and reserve the right to vary the specifi cations
without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for
variance. E&OE. See Graphic Templates for graphic bleed specifications
6/1/2023
https://www.theexhibitorshandbook.com/
downloads/download-graphic-templates
or
Graphic material: Backlit Textile (dye-sublimated
fabric) or Intensity (UV printed)
See graphic templates for graphic sizes.
Refer to related graphic templates for more
information Visit:
click here
Blaze Freestanding Light Box 1010 is 10’w by 10’h, is double sided
and features a durable 6” aluminum frame in your choice of Silver,
White or Black. Perimeter, interior LED light bars are pre-attached to
the frame and make the box GLOW. The light bars include an internal
power supply, which means no separate power supplies within the
frame, minimizing shadowing and cord management.
Two backlit graphic material options are available to choose from,
Backlit Textile (dye-sublimation printed) and Intensity (UV/LED printed).
Backlit Textile is an 8 oz. tightly woven fabric that is slightly stretchy,
foldable and washable; it is best for multiple uses. Intensity is a 6.5 oz.
material that has a smooth, coated finish. The UV printing process
allows Intensity to be double struck with ink creating vibrant backlit
graphics.
Packing case(s):
3 Boxes
Shipping dimensions:
2 x BOXES (79"L x 9"H x 11"D)
2006.6mm(l) x 228.6mm(h) x 279.4mm(d)
1 x BOX (18"L x 12"H x 4"D)
457.2mm(l) x 304.8mm(h) x 101.6mm(d)
Approximate shipping weight:
195 lbs / 88.4505 kg
Tools Required
MULTI HEX KEY
(INCLUDED)
How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead
into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed
in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.
Note: Keep the set up area clean by using a
drop cloth, washing hands before set-up or
by wearing gloves.
Removal: Use the pull tab located on the
graphic and gently pull the graphic from the
frame, going around the perimeter.
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot
clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing
machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.
SEG GRAPHIC APPLICATION
Fold graphic over
FCE-2 and push
into each corner of the frame (1-4).
Fabric is outside of the FCE-2.
Press into the middle of the
outside channel (5-8) and
continue around perimeter.
To remove graphic, use the pull
tab and gently pull graphic from
frame.
FEED POWER CABLE THRU
GROMMET HOLE
Connect LED lights
End to End
LED Lights
NOTE: A maximum of 20 LED fixtures can be connected in a line.
Connect LED lights
End to End
SETUP INSTRUCTIONS
QTY
IMAGE
DESCRIPTION
1
8FT POWER CORD FOR LED-EV LIGHTS
8
CB10 90 DEGREE CONNECTOR
9
JOINER BAR (OLD STYLE)
1
90MM FROM LEFT END
LEFT/BOTTOM END-WITH 9MM DIA THRU HOLES
END-IB2 LOCK HOLES ONE END- 171MM FROM
EXTRUSION-WITH MITRE CUT FOR CB10s ONE
1524MM (60.00in) LENGTH OF 360 BLAZE
6
END-IB2 LOCK HOLES ONE END
EXTRUSION-WITH MITRE CUT FOR CB10s ONE
1524MM (60.00in) LENGTH OF 360 BLAZE
4
HEAD SCREW
5/16-18 THREAD, 1 3/8 inch LONG SILVER FLAT
2
650mm length
Blaze foot with double countersunk holes, 3in x
1
THRU HOLES 90MM FROM LEFT END
END-IB2 LOCK HOLES ONE END-WITH 9MM DIA
EXTRUSION-WITH MITRE CUT FOR CB10s ONE
1524MM (60.00in) LENGTH OF 360 BLAZE
2
LOCK HOLES ONE SIDE-CAM LOCK ONE SIDE
1508MM LENGTH OF PH EXTRUSION-WITH IB2
16
19" LED AC LIGHT BAR 6000 K
8
10" LED AC LIGHT BAR 6000 K
ASSEMBLE FRAME
1
2
3
4
5
6
7
8
9
ATTACH SUPPORT PLATES
SETUP INSTRUCTIONS
QTY
IMAGE
DESCRIPTION
1
right corner
beading around perimeter & pull tab in bottom
Backlit Intensity, single sided, sewn with silicone
119.88 w X 119.88 h finish size, UV/LED print on
GRAPHIC (A1) (123.88 w X 123.88 h total size )
1
right corner
beading around perimeter & pull tab in bottom
Backlit Intensity, single sided, sewn with silicone
119.88 w X 119.88 h finish size, UV/LED print on
GRAPHIC (A2) (123.88 w X 123.88 h total size )
ADD GRAPHICS
THEN PRESS ALONG THE
PERIMETER EDGE
PRESS CORNERS IN
-
1
-
2
-
3
-
4
-
5
-
6
Displaypros 1010 is a freestanding lightbox, measuring 10 feet wide by 10 feet high, with a durable aluminum frame in your choice of silver, white, or black. It features perimeter and interior LED light bars that make the box glow, powered by an internal power supply to minimize shadowing and cord management. Choose from backlit textile (dye-sublimation printed) or intensity (UV/LED printed) backlit graphic material.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
displaypros 3010 User manual
-
displaypros 1008 User manual
-
-
displaypros 3008 User manual
-
-
displaypros 0803 User manual
-
displaypros 0308 Blaze Freestanding Light Box User manual
-
displaypros 0406 User manual
-
displaypros 0604 Blaze Hanging Light Box User manual
-
displaypros 0306 Blaze Freestanding Light Box User manual
Other documents
-
displaypro 1010 User manual
-
Display Pros 2008 Blaze Wall Light Box User guide
-
Display Pros 0806 User manual
-
Blaze 0408 User guide
-
Blaze 0604 User guide
-
Blaze 0806 User guide
-
Blaze 0606 User guide
-
Display Pros MODify Nesting Table 02 User guide
-
Display Pros MODify Nesting Table 03 User guide
-
Display Pros 01 User guide
