PQL 55473 User manual

Brand: PQL

Model: 55473

Type: User manual

PQL 55473 LED Designer Strips V2 offer versatile lighting solutions for both surface mounting and suspended chain mounting. Suitable for dry or damp locations, these strips provide reliable illumination with a focus on safety and ease of installation. Dimming capabilities allow for precise light control, while the durable construction ensures longevity. Explore creative lighting possibilities with PQL 55473, the ideal choice for modern and functional spaces.

LED DESIGNER STRIPS V2

INSTALL INSTRUCTIONS

Specifications and dimensions are subject to change without notice.

Photos and line drawings may not be to scale and are for general reference only.© P.Q.L., Inc. • 2285 Ward Avenue • Simi Valley, CA 93065 • 800.323.8107 • Fax: 877.619.7053

PREMIUM QUALITY LIGHTING® • www.PQLighting.com

PLEASE FIND A QUALIFIED ELECTRICIAN FOR INSTALLATION. Please read

the instructions before you install and use the luminaire.

WARNING, CAUTIONS AND OPERATING INSTRUCTIONS

Before installing, servicing, or performing routine maintenance on this

equipment; Follow these general precautions:

• To reduce the risk of death, personal injury or property damage from

fire, electric shock, falling parts, cuts/abrasions, and other hazards read

all warnings and instructions included with and on the fixture box and all

fixture labels.

• Commercial installation, service and maintenance of luminaires should be

performed by a qualified licensed electrician.

• For the installation: If you are unsure about the installation or maintenance

of the luminaires, consult a qualified licensed electrician and check your

local electrical code.

• To prevent wiring damage or abrasion, do not expose wiring to edges of

sheet metal or other sharp objects.

• Do not make or alter any open holes in an enclosure of wiring or electrical

components during kit installation.

WARNING: RISK OF FIRE OR ELECTRICAL SHOCK

• Turn o electrical power at fuse or circuit breaker box before wiring fixture

to the power supply.

• Turn o the power when you perform any maintenance.

• Verify that supply voltage is correct by comparing it with the luminaire

label information.

• All wiring connections should be capped with UL approved wire

connectors.

CAUTION: RISK OF INJURY

• Avoid direct eye exposure to the light source while it is on.

• Account for small parts and destroy packing material, as these may be

hazardous to children.

NOTICES:

• Green ground screw is provided in the proper location. DO NOT RELOCATE.

• Minimum 90° supply conductors.

• Suitable for Dry or Damp Locations.

!WARNING DISCONNECT POWER BEFORE INSTALLING OR SERVICING.

SURFACE MOUNTING FIG. :

1. Secure the provided brackets onto the ceiling using the provided

accessories and screws.

2. Screw the covers at the outlet of the back of the housing (Fig. 1).

3. Wire to main power through the J-Box (Fig. 2).

4. Then clip the brackets to the slots of the fixture (Fig. 3).

GENERAL WIRING DIAGRAM

LED DRIVER

Black (Line)

White (Neutral)

Green (Grd)

TO SOURCE

120-277V

Purple (Dim+)

Grey (Dim-)

Blue (-)

Red (+)

Lead wires

to LED

Load

** Dimming

wires to 0-10v IEC

Compliant Control

Fig. 2 Fig. 3Fig. 1

Outlet Box Cover

SUSPENDED CHAIN MOUNTING FIG. :

1. Clip the brackets to the slots of the fixture.

2. Attach the customer supplied V-hooks to the brackets (Fig. 4).

3. Attach the customer supplied chain to the V-Hooks and mounting

surface.

LENS INSPECTION: After installation check to make sure the lens is

completely secure inside the lamp body and the end cap. Gently pull

down on the lens to ensure it does not shift.

Fig. 4

Flexible Metallic Conduit

Bracket

PQL 55473 User manual

Brand: PQL

Model: 55473

Type: User manual

Download PDF

report

PQL 55473 User manual

PQL 55473 User manual

Related papers

Other documents