Whirlpool AWT 6124/1 Program Chart

Category
Washing machines
Type
Program Chart
5019 312 00142
Whirlpool is a registered trademark of Whirlpool USA
N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.
Programme
Care
Labels
Type of wash / Notes
Max.
load
kg
Detergents and additives Special Options Max.
Spin Speed
rpm
Prewash Main
Wash
Softener Bleach Easy
Ironing
Eco Intensive
Rinse
Rinse
Hold
Cotton 90°
with prewash
Heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
5.0
Yes
1)
Yes
❉❉
1200
Synthetic 60°
with prewash
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
2.0
Yes
1)
Yes
❉❉
800
2)
Delicate 40°
with prewash
Heavily soiled curtains and delicate clothing, dresses, skirts, shirts and blouses.
1.5
Yes
1)
Yes

800
2)
Cotton
40°-60°-9
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton
and linen.
5.0
Yes
❉❉
1200
Daily Mixed Slightly to normally soiled textiles made of cotton and/or synthetics.
3.0
Yes
❉❉
1200
Synthetic 40°
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon).
2.0
Yes
❉❉
800
2)
Delicate 40° Curtains and delicate clothing, dresses, skirts, shirts and blouses.
1.5
Yes

800
2)
Wool 40°
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
If you select Rinse Hold do not leave items to soak for too long.
1.0
Yes

800
2)
Silk 30°
Textiles made of silk, linen, wool and viscose marked as handwashable.
If you select Rinse Hold do not leave items to soak for too long. No spinning.
1.0
Yes

3)
Rinse + Gentle Spin
Programme for treating delicate laundry with starch or softener.
2.0


800
2)
Rinse + Spin
Programme for treating cotton or linen laundry with starch or softener.
5.0


1200
Spin
Programme to spin cotton or linen laundry intensively with maximum spin speed.
5.0


1200
Gentle spin
Programme to spin delicate laundry gently with a restricted spin speed.
2.0

800
2)
Drain
Drain only - no spinning. Alternative method of terminating programme after Rinse Hold.

A. Start Button
B. Temperature Indication lamps
C. Spin Speed Selection Button
D. On/Off button
1)
Do not use liquid detergents.
2)
For improved garment care, spin speed is restricted to
800 rpm in this programme.
3)
For improved garment care, spin speed is zero in this
programme.
Cold
+
)
,
*
AWT 6124/1
GB
5019 312 00142
Whirlpool is a registered trademark of Whirlpool USA
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values in
the table in relation to the water supply pressure and temperature, the load and the type of wash.
The data on the Energy Label refer to the programme Cotton 60°C.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the
water out.
1. Load the machine, close the drum doors and
check that they are properly locked.
2. Add detergents and additives into the dispenser to
no more then the
MAX
level mark, as follows:
Programme with pre and main wash
Main wash programme without prewash
Fabric softeners and conditioners
Chlorine bleach
Stain remover agents
Anti-scale agents (if necessary)
3. Press the
On/Off
button . The pilot lamp of
the
On/Off
button , a spin speed indicator
lamp and, in case of availability, a temperature
indicator lamp light up.
4.
Turn the programme selector knob to the desired
programme and temperature.
The knob will
move half a step for correct positioning. The
temperature indication (if available) switches
to the selected temperature.
Selecting or deselecting an option can be done at
any time during the programme. The option will
be applied as long as the corresponding
programme phase has not been executed yet.
Easy Ironing button
Can be used together with Cotton ,
Synthetic and Daily Mixed
programmes to make ironing easier.
Increases the water quantity in rinsing and the
clothes are spun in a softer manner.
Eco button
The duration of the wash is extended and the max
temperature reduced to save up to 40% of energy
compared to a normal wash but maintaining good
washing results.
Intensive Rinse button
One rinse cycle is added to ensure a more
intensive rinse.
This option is particularly suitable for areas with
very soft water, washing baby linen and people
with detergents allergies.
Spin Speed Selection button
The appliance selects the spin speed proposed for
the programme chosen.
Press the button to set another spin speed.
If the spin speed 0 is selected, the final spin is
cancelled, but not the intermediate spins. The
programme ends with a drain cycle.
CONSUMPTION DATA
Programme
Temperature Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)
Cotton 90 5.0 *63 1.80 2:05
Cotton 60 5.0 55 0.95 2:05
Cotton 40 5.0 55 0.55 2:05
Daily Mixed 40 3.0 49 0.48 1:00
Synthetic 40 2.0 50 0.40 1:30
Delicate 40 1.5 60 0.55 0:50
Wool 40 1.0 60 0.50 0:50
Silk 30 1.0 60 0.30 0:40
PREPARATION OF WASH CYCLE
SELECT THE DESIRED OPTION
Rinse Hold button
The laundry remains in the last rinse water
without progressing to the final spin cycle to
avoid creasing and prevent colours from fading.
This option is particularly recommended for the
Synthetic , Delicate and Daily
Mixed programmes.
This function is particularly useful if you want
to postpone spinning to a later time, or if you
want to drain only.
Note:
the programme selector knob stops on .
Appliance in Rinse Hold :
Press the Rinse Hold button again: the
programme will terminate automatically with
the selected spin cycle.
If you do not wish to spin the clothes, turn the
programme selector knob to the Drain
programme and press the
Start
button
again.
Turn on the tap and press the
Start
button .
The indicator lamp of the
Start
button lights
up.
Note
: If there is a power interruption or if the
appliance is disconnected during the cycle, the
programme will run again from the point where it
was interrupted.
The programme selector knob is in the Stop
position  .
1. Press the
On/Off
button to switch off
the machine.
2. Turn the tap off.
3. Wait for the lid to unlock (about 1 minute).
4.
Open the lid and the drum doors and unload
the machine.
1. Turn the programme selector knob to the new
programme.
The programme selector knob
moves half a step and the pilot lamp of the
Start button flashes.
If necessary,
select the additional options and the spin
speed.
2.
Start programme by pressing the
Start
button .
If, for any reason, you wish to interrupt the
programme for a certain time and continue it later:
1. Press the
On/Off
button .
2. After the desired pause, press again on the
On/Off
button .
1. Set the programme selector to Drain .
2. Press the
Start
button to start the
Drain programme.
PROGRAMME START
END OF WASH CYCLE
CHANGE THE PROGRAMME DURING THE WASH
CYCLE
PAUSE/INTERRUPT A PROGRAMME
CANCEL PROGRAMME
  • Page 1 1
  • Page 2 2

Whirlpool AWT 6124/1 Program Chart

Category
Washing machines
Type
Program Chart

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI