DRAFT VERSION
USER GUIDE
To ensure safe and proper operation of this product, please read the included important information before use.
Basic line / Hands-free Video Phone
AF7
DRAFT VERSION
1. Table of contents
1. Table of contents
2. Components and Descriptions
3. How to use
4. How to connect
5. Cautions
6. Package components list
7. Specication
1
Basic function
Product settings
Brightness / Contrast / Hue settings
Loudness setting of chime
Info
Reset (Factory settings)
1
2
3
3
3
4
4
4
4
5
5
6
6
DRAFT VERSION
1. TFT LCD
2. Power LED
3. Monitoring (DOWN button)
4. Talk (SELECT button)
5. Door Open (UP button)
7. Power Switch
6. Menu
8. External connection socket
2. Components and Description
2
Check your visitors.
The LED turns on when power is turned on.
Used to turn on or off power.
Enter and exit menu.
Used to monitor the door camera’s video image,
and move within the menu feature (down / left).
Used to talk with your visitor, and select within the
menu feature.
Used to open doors, and move within the menu
feature (up / right).
Used for product updates, door camera and
additional videophone connections.
1
2
7
3
4 5 6
8
DRAFT VERSION
A. When visitor calls from front door camera
(Call time : 60 seconds)
a. When visitor calls from front door, the visitor appears on LCD screen with a chime.
b. Press talk button to talk with your visitor, and press Door Open button to open door
(Door can be opened only during call)
c. Press Talk button again to end call and return to standby mode.
B. Front door Monitoring : Used to check the visitors on your front door.
(Monitoring time : 30 seconds)
Press Monitoring button once in standby mode to see video image of Door camera 1.
Press Monitoring button once again to see video of Door camera 2. (If Door camera 2 has
been connected) Press once again to return to standby mode.
1) In case of Door camera 1 only : Door Camera 1 -> Standby mode
2) In case of Door Camera 1 and 2 : Door camera 1 -> Door camera 2 -> Standby mode
3. How to use
C. Product settings
* Use buttons below to set up product features using the menu, the button features are different
according to menu status. Press Menu button with the video image turned on to set up product. Press
Menu button during menu settings to exit menu settings.
Menu
Talk button / End talkDoor open button
Chime / visitor appears
Chime Sound
Talk Door OpenMonitoring
3
DRAFT VERSION
D. Video Set (Brightness / Contrast / Hue)
- Brightness : Control brightness level of video
- Contrast : Control contrast level of video
- Hue : Control hue level of video
- Reset : Return video setting values to default.
(Brightness – 10, Contrast – 10, Hue – 10)
- EXIT : Move to upper level menu.
E. Etc. (Loudness setting of chime)
- Chime-Volume : Control volume level of door camera chime
(Control level is from 0~3, and factory level is 2)
- EXIT : Move to upper level menu.
F. Info (Product Model, Program version, Camera Info)
- Model : Shows the model name of product
- Ver. : Shows the current program version of product
- Input : Shows the number of the currently displayed Door Camera with the video transmission type (NTSC / PAL)
Press menu button again to return to upper level menu.
G. Reset (Factory settings)
In standby mode, press Talk button and Door Open button together for 3 seconds.
This will reset the setting values below :
- Video image : Brightness – 10, Contrast – 10, Hue – 10
- Chime-Volume : Level 2
1)
Monitoring button
: Move down / move left according to menu status
2)
Talk button
: Choose / select menu feature
3)
Door Open button
: Move up / move right according to menu status
4)
Menu button
: Enter and exit menu
Display Screen Menu
4
Enter / Exit MenuLoudness Setting Info Video set
DRAFT VERSION
Below is the wiring diagram of this product.
* Door Camera connector polarity
1. Red : Audio input 2. Blue : GND 3. Yellow : Power (+12V) 4. White : Video input
When wiring door camera to the video phone, the UTP cable
mentioned below should be used.
Door camera wiring
For video signal cable, we recommend coaxial cable (5c2v). When using UTP CABLE[CAT.5], connect
the unused wire to GND.
4. How to Connect
5. Cautions when wiring
5c2v Cable
UTP CABLE
5
DRAFT VERSION
1. Product (AF7)
2. Wall-hanging bracket
3. User Guide
4. Bracket x screw, wall use (SCREW GH1T 4*20 ZnW) – 4EA
5. Product x screw (SCREW PHM 3*6 ZnY) – 1EA
6. Door Camera connector (CONN. 4P*200) – 2EA
6. Package components list
7. Specication
6
Parameters
Wire Interface
Power supply
Power consumption
Operation method
Display screen
Chime sounds
Video display time
Distance range
Working temperature
AF7
Door Camera 4-wire (Polarity)
100V-240V~, 50/60Hz (FREE VOLTAGE)
Standby Mode :3 W In Use :8 W
Simultaneous call method
7" TFT LCD (AF7)
Front Door : Electric Chime, Interphone : Beep
Front door Monitor : 30 ± 5sec , Front door Call : 60 ± 5sec
30m (Wiring Pie 0.5mm)
0 ~ +40°C (32°F ~ 104°F)
Monitor (AF7)
(T) 4 x 20mm (M)3 x 6mm 2ea
Bracket Fix Screw Product x screw 4P Connector
User Guide
USER GUIDE
Bracket
DRAFT VERSION
Bldg A Rm 402 Innovalley, 621 Sampyeong Dong,
Bundang Gu, Sungnam Si, Kyunggi Province, Korea 13486
T. +82-31-8018-0604 F. +82-31-8018-0606
www.alt-korea.com |www.alt-usa.com | www.alt-worldwide.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Commax CDV-43N Owner's manual
-
Navien UHA-432SM User manual
-
Commax CDV-43Q Owner's manual
-
-
-
-
-
Commax CDV-70KPT Owner's manual
-
-