ESZH 5462
PRODUCT DESCRIPTION SHEET
DE
5019 410 54701
First-Last...
shelf positions
1.Control panel
2.Cooling fan* (not visible)
3.Top heating element
4.Oven light
5.Fan
6.Bottom heating element (not visible)
7.Oven door hinges
8.Oven door
*N.B.:
The cooling fan switches on only when the oven or
cooktop has reached a certain temperature.
The fan can run at two speeds:
1) Full speed
2) Reduced speed
The fan speed depends on the temperature of the appliances.
After the oven and/or the cooktop switch off, the cooling fan may,
however, continue to run for a certain time to ensure proper cooling.
Important:
An optional kit consisting of an oven door glass and of
relevant mounting components, is available by the After-Sales
Service. The use of the kit reduces the temperature of the outer oven
surface and is strongly recommended if there are kids in the house.
Code N° 4819 310 39186.
ACCESSORIES
Grid
Baking tray
FOR A DESCRIPTION ON HOW TO USE THE OVEN, PLEASE REFER TO THE PROGRAMMER
DESCRIPTION SHEET.
OVEN FUNCTIONS TABLE
Function
symbol
Function
Preset
temperature/
level
Function description
(see details in the user's manual)
0OVEN OFF --
OVEN LIGHT - To switch on the oven light.
MLTF
(Heat Maintenance)
35C
To keep a constant temperature, either
35°C or 60°C.
STATIC 200C
To cook food at one shelf level.
Preheating.
PASTRY
(Static+Fan)
175C
To cook on two shelf levels, at the same
temperature.
GRILL 3 To grill small pieces of meat, toast, etc...
TURBOGRILL
(Grill+Fan)
3 To grill large pieces of meat.
PROGRAMME P1 To bake pizza, bread, focaccia.
First
Last
COOKTOP FUNCTIONS TABLE
Function
symbol
Function
Function description
(see details in the user's manual)
KEEP WARM Constant temperature, 60°C.
DUAL ZONE
To extend the heated area of the second part of oval or
rectangular cooking zones.
ICP
(Initial Cooking Phase)
To accelerate the heating of the selected cooking zone.
FAST BOILING To bring the water to the boil fast.
GENTLE HEAT Constant temperature, 35°C.
1-10 POWER LEVELS -
STARTING THE OVEN
When the oven is connected to the power supply for the first time, or re-connected after a power
failure, the display shows
]^
.
To start the oven:
turn
knob 1
to
0
.
press
button 2
. The display shows --:--.
1. Selector knob: to choose the oven functions.
2. Button to select and confirm the different operations (operate by single presses only).
3. Knob to set: time of day, cooking time, the time at which cooking should terminate, the
temperatures and the power levels (Function
P
).
4. Control knob for front, left cooking zone* 0 1 ... 10
5. Control knob for rear, left cooking zone* 0 1 ... 10
6. Control knob for rear, right cooking zone* 0 1 ... 10
7. Control knob for front, right cooking zone* 0 1 ... 10
*) The cooktop control knobs are not interchangeable. After cleaning or servicing, they must be returned to their
original positions.
1
2 4 5 6
7
3