IKA HB 10.3 User manual

Type
User manual

IKA HB 10.3 is a protective cover for heating baths. It can be used with HB digital and HB eco heating baths, as well as with RV 3, RV 8, and RV 10 rotary evaporators. The protective cover helps to protect the user from heat and chemical splashes, and it also helps to prevent contamination of the sample.

The protective cover is made of durable plastic and is easy to clean. It is also lightweight and easy to install. The cover is designed to fit snugly over the heating bath or rotary evaporator, and it has a built-in handle for easy removal.

IKA HB 10.3 is a protective cover for heating baths. It can be used with HB digital and HB eco heating baths, as well as with RV 3, RV 8, and RV 10 rotary evaporators. The protective cover helps to protect the user from heat and chemical splashes, and it also helps to prevent contamination of the sample.

The protective cover is made of durable plastic and is easy to clean. It is also lightweight and easy to install. The cover is designed to fit snugly over the heating bath or rotary evaporator, and it has a built-in handle for easy removal.

HB 10.3
5
/// DEUTSCH
6
/// ENGLISH
7
/// FRANÇAIS
Fig. 1
!
!
!
5
DE
Sicherheitshinweise
Montage
Reinigung
Beachten Sie die Betriebsanleitung, insbesondere die Sicherheitshinweise des Heizbades
(HB digital, HB eco) und des Rotationsverdampfers (RV 3, RV 8, RV 10).
Betreiben Sie das Gerät nur unter einem allseitig geschlossenen Abzug oder einer
vergleichbaren Sicherheitseinrichtung.
Lösen Sie die seitliche Rändelschraube am Haltebügel.
Öffnen Sie den Haltebügel und setzen Sie die Schutzhaube auf den seitlichen Griffe des
Heizbades ab.
Schließen sie den Haltebügel und ziehen Sie die seitliche Rändelschraube wieder an.
Verwenden Sie zum Reinigen ein weiches Tuch und lauwarmes Wasser.
1
2
3
6
EN
Safety instructions
Assembly
Cleaning
Note the operating instructions, in particular the safety instructions, for the heating bath
(HB digital, HB eco) and the rotary evaporator (RV 3, RV 8, RV 10).
Only use the device under an all side-closed exhaust, or a comparable protective device.
Loosen the knurled screw on the side of the retaining bracket.
Open the retaining bracket and place the protective cover on the side handles of the heating
bath.
Close the retaining bracket and tighten the knurled screw.
Use a soft rag and tepid water for cleaning.
1
2
3
7
FR
Consignes de sécurité
Montage
Nettoyage
Notez le mode d’emploi, particulièrement les conseils de sécurité, du bain chauffant
(HB digital, HB eco) et du évaporateurs rotatif (RV 3, RV 8, RV 10).
Utilisez seulement l’appareil sous un système d’aspiration ou un dispositif de protection
équivalent.
Desserrez la vis moletée latérale sur le support de retenue.
Ouvrez le clip de fixation et placez le couvercle de protection sur les poignées latérales du bain
chauffant.
Fermez le clip de fixation et serrez la vis moletée latérale.
Utilisez un chiffon doux et du l’eau tiède pour la nettoyage.
1
2
3
20000026950_20025278_HB 10.3_102019
Technical specifications may be changed without prior notice.
IKAworldwide IKAworldwide /// #lookattheblue @IKAworldwide
Discover and order the fascinating products of IKA online:
www.ika.com
JAPAN
IKA Japan K.K.
Phone: +81 6 6730 6781
VIETNAM
IKA Vietnam Company Limited
Phone: +84 28 38202142
INDIA
IKA India Private Limited
Phone: +91 80 26253 900
UNITED KINGDOM
IKA England LTD.
Phone: +44 1865 986 162
MALAYSIA
IKA Works (Asia) Sdn Bhd
Phone: +60 3 6099-5666
CHINA
IKA Works Guangzhou
Phone: +86 20 8222 6771
POLAND
IKA Poland Sp. z o.o.
Phone: +48 22 201 99 79
USA
IKA Works, Inc.
Phone: +1 910 452-7059
KOREA
IKA Korea Ltd.
Phone: +82 2 2136 6800
BRAZIL
IKA Brasil
Phone: +55 19 3772 9600
IKA-Werke GmbH & Co. KG
Janke & Kunkel-Straße 10, 79219 Staufen, Germany
Phone: +49 7633 831-0, Fax: +49 7633 831-98
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

IKA HB 10.3 User manual

Type
User manual

IKA HB 10.3 is a protective cover for heating baths. It can be used with HB digital and HB eco heating baths, as well as with RV 3, RV 8, and RV 10 rotary evaporators. The protective cover helps to protect the user from heat and chemical splashes, and it also helps to prevent contamination of the sample.

The protective cover is made of durable plastic and is easy to clean. It is also lightweight and easy to install. The cover is designed to fit snugly over the heating bath or rotary evaporator, and it has a built-in handle for easy removal.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages