Zanussi ZWH6105 User manual

Brand: Zanussi

Model: ZWH6105

Category: Washing machines

Type: User manual

This manual is also suitable for

ZWH6125

ZWH 6105

ZWH 6125

126.2936.60:- 23/03/10 9:37 Página 1

Content

Safety information - - - - - - - - - - - - - - - - - -27

Description of the appliance - - - - - - - - - - -29

Detergent dispenser drawer - - - - - - - - - - -29

Control panel and functions - - - - - - - - - - -30

Programme table - - - - - - - - - - - - - - - - - -31

Washing Hints - - - - - - - - - - - - - - - - - - - - -32

Before the first use - - - - - - - - - - - - - - - - -34

Operating Sequence - - - - - - - - - - - - - - - -34

Care and cleaning - - - - - - - - - - - - - - - - - -39

Something not working - - - - - - - - - - - - - - 41

Technical data- - - - - - - - - - - - - - - - - - - - - 44

Consumption values - - - - - - - - - - - - - - - - 45

Installation instruction - - - - - - - - - - - - - - - 46

Environmental concerns - - - - - - - - - - - - - 49

Guarantee conditions - - - - - - - - - - - - - - - 50

European guarantee - - - - - - - - - - - - - - - - 50

Technical Service's Telephones - - - - - - - - 51

Thank you for selecting our appliance

We wish you lots of enjoyment with your new appliance and we hope that you will consider our

brand again when purchasing household appliances.

Please read this user manual carefully and keep it throughout the product life cycle as a

reference document. The user manual should be passed on to any future owner of the

appliance.

The following symbols are used in this manual:

Important information concerning your personal safety and information on how to avoid

damaging the appliance.

General information and tips

Environmental information

126.2936.60:- 23/03/10 9:37 Página 26

Safety information

In the interest of your safety and to ensure

the correct use, before installing and first

using the appliance, read this user manual

carefully, including its hints and warnings.

To avoid unnecessary mistakes and

accidents, it is important to ensure that all

people using the appliance are thoroughly

familiar with its operation and safety

features. Save these instructions and make

sure that they remain with the appliance if

it is moved or sold, so that everyone using

it through its life will be properly informed

on appliance use and safety.

General safety

● It is dangerous to alter the specifications or

attempt to modify this product in any way.

● During high temperature wash programmes

the door glass may get hot. Do not touch it!

● Make sure that small pets do not climb into

the drum. To avoid this, please check into

the drum before using.

● Any objects such as coins, safety pins,

nails, screws, stones or any other hard,

sharp material can cause extensive damage

and must not be placed into the machine.

● Only use the advised quantities of fabric

softener and detergent. Damage to the

fabric can ensue if you over-fill. Refer to the

manufacturer’s recommendations of

quantities.

● Wash small items such as socks, laces,

washable belts etc in a washing bag or

pillow case as it is possible for such items

to slip down between the tub and the inner

drum.

● Do not use your washing machine to wash

articles with whalebones, material without

hems or torn material.

● Always unplug the appliance and turn off

the water supply after use, cleanning and

maintenance.

● Under no circumstances should you attempt

to repair the machine yourself. Repairs

carried out by inexperienced persons may

cause injury or serious malfunctioning.

Contact your local Service Centre. Always

insist on genuine spare parts.

Installation

● This appliance is heavy. Care should be

taken when moving it.

● When unpacking the appliance, check that it

is not damaged. If in doubt, do not use it

and contact the Service Centre.

● All packing and transit bolts must be

removed before use. Serious damage can

occur to the product and to property if this is

not adhered to. See relevant section in the

user manual.

● After having installed the appliance, check

that it is not standing on the inlet and drain

hose and the worktop is not pressing the

electrical supply cable.

● If the machine is situated on a carpeted

floor, please adjust the feet in order to allow

air to circulate freely

● Always be sure, that there is no water

leakage from hoses and their connections

after the installation.

● If the appliance is installed in a location

subject to frost, please read the «dangers

of freezing» chapter.

● Any plumbing work required to install this

appliance should be carried out by a

qualified plumber or competent person.

● Any electrical work required to install this

appliance should be carried out by a

qualified electrician or competent person.

126.2936.60:- 23/03/10 9:37 Página 27

Use

● This appliance is designed for domestic

use. It must not be used for purposes other

than those for which it was designed.

● Only wash fabrics which are designed to be

machine washed. Follow the instructions on

each garment label.

● Do not overload the appliance. See the

relevant section in the user manual.

● Before washing, ensure that all pockets are

empty and buttons and zips are fastened.

Avoid washing frayed or torn articles and

treat stains such as paint, ink, rust, and

grass before washing. Underwired bras

must NOT be machine washed.

● Garments which have been in contact with

volatile petroleum products should not be

machine washed. If volatile cleaning fluids

are used, care should be taken to ensure

that the fluid is removed from the garment

before placing in the machine.

● Never pull the power supply cable to

remove the plug from the socket; always

take hold of the plug itself.

● Never use the washing machine if the

power supply cable, the control panel, the

working surface or the base are damaged

so that the inside of the washing machine is

accessible.

Child safety

● This washing machine is not intended for

use by young children or infirm persons

without supervision.

● Young children should be supervised to

ensure that they do not play with the

appliance.

● The packaging components (e.g. plastic

film, polystyrene) can be dangerous to

children - danger of suffocation! Keep them

out of children’s reach

● Keep all detergents in a safe place out of

children’s reach.

● Make sure that children or pets do not climb

into the drum.

126.2936.60:- 23/03/10 9:37 Página 28

Description of the appliance

Detergent dispenser drawer

Control panel

Door opening handle

Drain pump

Adjustable feet

Detergent dispenser drawer

Prewash

Wash

Fabric Softener

126.2936.60:- 23/03/10 9:37 Página 29

Control panel and functions

Programme selector dial and On/Off switch

Spin reduction button

Options button

Prewash button

Easy Iron button

Extra Rinse button

Start/Pause button

Door

Delay Start button

126.2936.60:- 23/03/10 9:37 Página 30

Programme table

Programme /

Temperature

Type of laundry Options

Cotton 90º - Cold

White cotton: e.g. sheets,

tablecloths, household, linen.

, Extra Rinse, Eco

(*), Quick, Prewash,

Easy Iron

Synthetics 60º - Cold

Synthetic or mixed fabrics,

underwear, coloured garments,

non-shrink shirts, blouses.

Delicates 40º - Cold

Delicate fabrics, for example

curtains.

, Quick, Extra

Rinse, Prewash

Handwash 30º - Cold

Special programme for delicate

fabrics which their labels indicate

"don't shrink, hand wahsed by

machine".

Wool 40º

Special programme for wool

fabrics that their labels indicate

"Pure wool, don't shrink, hand

washed by machine."

Jeans 40º

With this programme it is possible

to wash items like pants, shirts or

jackets in Jeans and also jersey

realized with hitech materials.

Easy Iron, ,

Prewash

Soak 30º

Rinses

Separate rinse cycle for hand

washed items of all fabric.

Easy Iron, Extra Rinse,

Drain

Spin

Select this programme if you wish your laundry to be

prewashed at 30ºC before the main wash.

For emtying out the last rinse water in programmes with

the Rinse Hold option.

Separate spin for all fabric

For cancelling the wash programme which is running and

for switching the machine off.

126.2936.60:- 23/03/10 9:37 Página 31

Washing hints

Sorting the laundry

Follow the wash code symbols on each

garment label and the manufacturer’s washing

instructions. Sort the laundry as follows:

whites, coloureds, synthetics, delicates,

woollens.

Temperatures

Before loading the laundry

Never wash whites and coloureds together.

Whites may lose their «whiteness» in the

wash.

New coloured items may run in the first wash;

they should therefore be washed separately

the first time.

Make sure that no metal objects are left in

the laundry (e.g. hair clips, safety pins,

pins). Button up pillowcases, close zip

fasteners, hooks and poppers. Tie any

belts or long tapes.

Remove persistent stains before washing.

Rub particularly soiled areas with a special

detergent or detergent paste.

Treat curtains with special care. Remove

hooks or tie them up in a bag or net.

Maximum loads

Recommended loads are indicated in the

programme charts.

General rules:

Cotton, linen: drum full but not too tightly

packed;

Synthetics: drum no more than half full;

Delicate fabrics and woollens: drum no

more than one third full.

Washing a maximum load makes the most

efficient use of water and energy.

For heavily soiled laundry, reduce the load

size.

Laundry weights

The following weights are indicative:

Removing stains

Stubborn stains may not be removed by just

water and detergent. It is therefore advisable

to treat them prior to washing.

Blood: treat fresh stains with cold water. For

dried stains, soak overnight in water with a

special detergent then rub in the soap and

water.

Oil based paint: moisten with benzine stain

remover, lay the garment on a soft cloth and

dab the stain; treat several times.

Dried grease stains: moisten with turpentine,

lay the garment on a soft surface and dab the

stain with the fingertips and a cotton cloth.

90°

for normally soiled white cottons

and linen (e.g. tea cloths, towels,

tablecloths, sheets...)

60°

for normally soiled, colour fast

garments (e.g. shirts, night

dresses, pyjamas....) in linen,

cotton or synthetic fibres and for

lightly soiled white cotton (e.g.

underwear).

30°-40°-Cold

for delicate items (e.g. net

curtains), mixed laundry

including synthetic fibres and

woollens bearing the label «pure

new wool, machine washable,

non-shrink».

bathrobe 1200g

napkin, tea cloth, lady's brief, blouse 100g

quilt cover 700g

sheet 500g

pillow case, towelling towel, night dress

200g

table cloth 250g

man's shirt 200g

man's pyjamas 600g

men's underpanths 100g

126.2936.60:- 23/03/10 9:37 Página 32

Rust: oxalic acid dissolved in hot water or a

rust removing product used cold. Be careful

with rust stains which are not recent since the

cellulose structure will have already been

damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well

(whites and fast coloureds only).

Grass: soap lightly and treat with bleach

(whites and fast coloureds only).

Ball point pen and glue: moisten with

acetone (*), lay the garment on a soft cloth

and dab the stain.

Lipstick: moisten with acetone as above, then

treat stains with methylated spirits. Remove

any residual marks from white fabrics with

bleach.

Red wine: soak in water and detergent, rinse

and treat with acetic or citric acid, then rinse.

Treat any residual marks with bleach.

Ink: depending on the type of ink, moisten the

fabric first with acetone (*), then with acetic

acid; treat any residual marks on white fabrics

with bleach and then rinse thoroughly.

Tar stains: first treat with stain remover,

methylated spirits or benzine, then rub with

detergent paste.

(*) do not use acetone on artificial silk.

Detergents and additives

Good washing results also depend on the

choice of detergent and use of the correct

quantities to avoid waste and protect the

environment. Although biodegradable,

detergents contain substances which, in large

quantities, can upset the delicate balance of

nature.

The choice of detergent will depend on the

type of fabric (delicates, woollens, cottons,

etc.), the colour, washing temperature and

degree of soiling.

All commonly available washing machine

detergents may be used in this appliance:

● powder detergents for all types of fabric,

● powder detergents for delicate fabrics (60°C

max) and woollens,

● liquid detergents, preferably for low

temperature wash programmes (60°C max)

for all types of fabric, or special for woollens

only.

The detergent and any additives must be

placed in the appropriate compartments of the

dispenser drawer before starting the wash

programme.

If using concentrated powder or liquid

detergents, a programme without prewash

must be selected.

Pour liquid detergent into the dispenser drawer

compartment marked just before starting

the programme.

Any fabric softener or starching additives must

be poured into the compartment marked

before starting the wash programme.

Follow the product manufacturer’s

recommendations on quantities to use and do

not exceed the «MAX» mark in the

detergent dispenser drawer.

126.2936.60:- 23/03/10 9:37 Página 33

Quantity of detergent to be used

The type and quantity of detergent will depend

on the type of fabric, load size, degree of

soiling and hardness of the water used.

Water hardness is classified in so-called

«degrees» of hardness. Information on

hardness of the water in your area can be

obtained from the relevant water supply

company.

Follow the product manufacturers’ instructions

on quantities to use.

Use less detergent if:

● you are washing a small load,

● the laundry is lightly soiled,

● large amounts of foam form during washing.

Degrees of water hardness

Level

Degrees

German

°dH

French

°T.H.

Characteristic

1 0-7 0-15soft

2 8-14 16-25medium

3 15-21 26-37hard

4 > 21 > 37very hard

Before the first use

WARNING!

Ensure that the electrical and water

connections comply with the installation

instructions.

IMPORTANT!

Remove the polystyrene block and any

material from the drum.

IMPORTANT!

Pour 2 litres of water into the main wash

compartment of the detergent drawer in

order to activate the ECO valve. Then run a

cotton cycle at 95°C, without any laundry in

the machine, to remove any manufacturing

residue from the drum and tub. Pour 1/2 a

measure of detergent into the dispenser

drawer and start the machine.

1. Load the laundry

Open the door by carefully

pulling the door handle

outwards. Place the laundry in

the drum, one item at a time,

shaking them out

as much as possible. Close the door.

2. Measure out the detergent and the fabric

softener

Pull out the

dispenser

drawer until it

stops.

Measure out the amount of detergent

required, pour it into the main wash

compartment and, if you wish to carry out

a programme with the prewash phase, pour it

into the compartment marked .

If required, pour fabric softener into the

compartment marked (the amount used

must not exceed the «MAX» mark in the

drawer). Close the drawer gently.

Operating sequence

126.2936.60:- 23/03/10 9:37 Página 34

3. Select the required programme

If the Start/Pause button is not pushed during a

few minutes, the intensity of display backlight will

decrease to save energy.

The selector dial is divided into following sections:

● Cottons,

● Synthetics,

● Special

The green Start/Pause light starts to flash.

The selector dial can be turned either

clockwise or anticlockwise.

Position «Off» to Reset programme/Switching

OFF of the machine.

At the end of the programme the selector

dial must be turned to position «Off», to

switch the machine off.

IMPORTANT!

If you turn the programme selector dial to another

programme when the machine is working, the

red Start/Pause pilot light will flash 3 times to

indicate a wrong selection. The machine will not

perform the new selected programme.

4. Select the spin speed or Rinse Hold

option

Press the Spin button repeatedly

to change the spin speed, if you

want your laundry to be spun at

a speed different from the one

proposed by the appliance.

The relevant light will light up.

Maximum speeds are:

● Cottons: 1000 or 1200 rpm, depending on

the model;

● Synthetics, Handwash: 900 rpm

● Delicates: 700 rpm;

Rinse Hold (Agua en cuba): by selecting this

option the water of the last rinse is not emptied

out to prevent the fabrics from creasing. When

the programme has finished the pilot lights

«Door» and «End» are lit, the Start/Pause and

«Wash» lights are off and the door is locked to

indicate that the water must be emptied out.

IMPORTANT!

If an incorrect option is selected, the red pilot light

of the Start/ Pause button flashes for 3 times.

To empty out the water:

1. turn the programme selector dial to «Off»

2. select the Drain or Spin programme

3. reduce the spin speed if needed, by means

of the relevant button

4. depress Start/Pause button

5. at the end of programme, only the pilot light

End comes on.

5. Select Eco, or Quick option

Press the «Options» button

repeatedly, to select only one

of the available options. The

relevant light will light up.

Eco: Only for cotton and synthetic items lightly

or normally soiled at a temperature of 40°C or

higher. The washing time will be prolonged.

Quick (Corto): a very short cycle for slightly

soiled items that have been used or worn for a

short time.

This option is not available with the Handwash,

Sport 40° and Eco programmes.

The max. load recommended for cotton: is 3 kg

and for synthetic and delicate is 1.5 kg.

IMPORTANT!

If an option is chosen that is not allowed with

the selected programme, the red pilot light of

the Start/Pause button will flash 3 times.

The washing time will be reduced according to

the type of fabric and the selected temperature.

Select the Prewash option(Prelavado)

Select this option if you wish your laundry to be

prewashed at 30°C before the main wash.

The prewash ends with a short spin in

programmes for Cotton and Synthetic fabrics,

whereas in the programmes for Delicate fabrics

the water is only drained.

Select the Easy Iron option(Planchado fácil)

Selecting this option the laundry is gently

washed and spun to avoid any creasing. In this

way ironing is easier. In cotton programmes the

spin speed will be automatically reduced.

Furthermore the machine will perform some

additional rinses depending on the fabrics.

126.2936.60:- 23/03/10 17:14 Página 35

6. Select the Super Aclarado option

This button can be

selected with all

programmes except the

Hand wash

programmes. The

machine performs some

additional rinses.

This option is recommended for people who are

allergic to detergents, and in areas where the

water is very soft.

7. Select the Start/Pause

To start the selected programme, press the

Start/Pause button; the corresponding green

pilot light stops flashing.

The "Door" (Puerta)

light is alight to indicate

that the appliance

starts operating and

the door is locked.

To interrupt a programme which is running,

depress the Start/Pause button: the

corresponding green pilot light starts to flash.

To restart the programme from the point at

which it was interrupted, press the Start/Pause

button again.

If you have chosen a delayed start, the machine

will begin the countdown.

8. Select the Delay Start

Before you start the programme, if you wish to

delay the start, press the Delay Start button

repeatedly, to select the desired delay.

The wash programme can be delayed from 30

min - 60 min - 90 min, 2 hours and then by 1

hour up to a maximum of 20 hours.

You must select this option after you have set

the programme and before you press the

Start/Pause button.

You can cancel the delay time at any moment,

before you press the Start/Pause button.

If you have already pressed the Start/Pause

button, and you wish to cancel the delay time,

proceed as follows:

• set the washing machine to PAUSE by

pressing the Start/Pause button;

• press the button Delay Start button once.

On the display will appear the symbol «0’».

• press the Start/Pause button again to start

the programme.

IMPORTANT!

• The selected delay can be changed only after

selecting the washing programme again.

• The door will be locked throughout the delay

time. If you need to open the door, you must

first set the washing machine to PAUSE by

pressing the Start/Pause button and then

wait about 2 minutes until the «Door» light

has gone off. After you have closed the door,

press the Start/Pause button again.

The Delay Start can not be selected with

Drain programmes.

Display

The display shows the following information:

After selecting a programme the duration of

the selected programme appears on the

display.

During the programme, the time remaining is

updated every minute.

The Delay start appears on the display for

about 3 seconds, then the duration of the

previously selected programme is displayed.

The delay time value decreases by one unit

every hour and then, when 1 hour remain,

every minute.

The incorrect option selection is indicated

by the message Err displayed for few seconds

and by flashing of the red light Start/Pause

button.

In the event of operating problems, some

alarm codes can be displayed, (see

paragraph “Something not working”).

The End of programme is indicated by a

flashing zero «0».

126.2936.60:- 24/03/10 8:22 Página 36

Altering an option or a running programme

It is possible to change any option before the

programme carries it out. Before you make

any change, you must pause the washing

machine by pressing the Start/Pause button.

Changing a running programme is possible

only by resetting it. Turn the programme

selector dial to Off and then to the new

programme position. The washing water in the

tub will not emptied out. Start the new

programme by depressing the Start/Pause

button again.

Interrupting a programme

Depress the Start/Pause button to interrupt a

programme which is running, the

corresponding light starts to flash. Depress the

button again to restart the programme.

Cancelling a programme

Turn the selector dial to Off to cancel a

programme which is running. Now you can

select a new programme.

Opening the door after the programme has

started

First set the machine to pause by pressing the

Start/Pause button.

If the «Door» light flashes and after 2 minutes

goes off, the door can be opened.

If the «Door» light does not flash, this means

that the machine is already heating, that the

water level is above the bottom edge of the

door or that the drum is turning.

In this case the door can not be opened.

If you cannot open the door but you need to

open it you have to switch the machine off by

turning the selector dial to «Off».

After about 2 minutes the door can be opened

(pay attention to the water level and

temperature!).

At the end of the programme

The machine stops automatically. The

Start/Pause and light go off. The door can be

opened (the Door light is off).

Once the programme has finished after a few

minutes the energy saving system will be

enabled. The brigthness of the display is

reduced. By pressing any button the appliance

will come out of the energy saving status.

If the «Rinse Hold» option has been selected,

the «door» light illuminate but the door

remains locked to indicate that the water must

be emptied out before opening the door.

To empty out the water please read the steps

on the Rinse Hold option paragraph.

Turn the programme selector dial to «Off» to

switch the machine off. Remove the laundry

from the drum and carefully check that the

drum is empty.

If you do not intend to carry out another wash,

close the water tap. Leave the door open to

prevent the formation of mildew and

unpleasant smells.

CHILD LOCK

This machine incorporates a special feature

which blocks the control panel buttons, to

prevent children from manipulating the washing

machine, starting, pausing or altering any

programme or option previously chosen. It also

protects children from being injured by, or

causing damage to, the washing machine.

To activate this function, press the Spin

(Centrifugado) and the Options buttons

simultaneously, and the relevant simbol will light-

on in the lower left side of the display to show

that the feature is working. As long as it remains

active, all push buttons will be disabled and

programme cancelling or openning the door will

not be allowed.

To disable this device, press the Spin

(Centrifugado) and Options buttons again.

126.2936.60:- 23/03/10 9:37 Página 37

IMPORTANT!

You must DISCONNECT the appliance from

the electricity supply, before you can carry out

any cleaning or maintenance work.

Descaling

The water we use normally contains lime. It is a

good idea to periodically use a water softening

powder in the machine. Do this separately from

any laundry washing, and according to the

softening powder manufacturer's instructions. This

will help to prevent the formation of lime deposits.

Maintenance Wash

With the use of low temperature washes it is

possible to get a build up of residues inside

the drum.

We recommend that a maintenance wash be

performed on a regular basis.

To run a maintenance wash:

● The drum should be empty of laundry.

● Select the hottest cotton wash programme.

● Use a normal measure of detergent, must

be a powder with biological properties.

External cleaning

Clean the exterior cabinet of the appliance with

soap and water only, and then dry thoroughly.

Cleaning the dispenser drawer

The washing powder and additive dispenser

drawer should be cleaned regularly.

To aid cleaning, the top part of the additive

compartment should be removed.

Remove the drawer by pressing the catch

downwards and by pulling it out. Flush it out

under a tap, to remove any traces of

accumulated powder.

Cleaning the drawer recess

Having removed the

drawer, use a small

brush to clean the

recess, ensuring that all

washing powder residue

is removed from the

upper and lower

part of the recess.

Replace the drawer and run the rinse programme

without any clothes in the drum.

Cleaning the pump

The pump should be inspected if

● the machine does not empty and/or spin

● the machine makes an unusual noise during

draining due to objects such as safety pins,

coins etc. blocking the pump.

Proceed as follows:

● Pull out the plug from the power socket.

● If necessary, wait until the water has

cooled down.

● Open the drainage area door.

● Place a bowl to collect

the water.

● Turn slowly the lid of

the diaphragm

towards left side and

allow that the water of

the washing machine

goes flowing slowly to

the bowl.

● When the bowl is full, turn and close the lid of

the diaphragm.

● Empty the bowl. Repeat the procedure until you

have completely emptied the washing machine.

● Always keep a rag nearby to dry up spillage of

water when removing the cover.

● Remove the objects such as buttons, coins and

the lint that has been accumulated in the

area of the pump impeller by rotating it.

Care and cleaning

126.2936.60:- 23/03/10 9:37 Página 38

● Screw the lid of the diaphragm clockwise, be

sure is completely tighten.

● Close the drainage area door.

IMPORTANT!

When the appliance is in use and depending

on the programme selected there can be hot

water in the pump.

Never remove the pump cover during a wash

cycle, always wait until the appliance has

finished the cycle, and is empty. When

replacing the cover, ensure it is securely

retightened so as to stop leaks and young

children being able to remove it.

Cleaning the water inlet filter

If your water is very hard or contains traces of

lime deposit, the water inlet filter may become

clogged.

It is therefore a good idea to clean it from time

to time.

Turn off the water

tap. Unscrew the

water inlet hose.

Clean the filter using

a hard bristle brush.

Tighten up the inlet

hose.

The dangers of freezing

If the machine is exposed to temperatures

below 0°C, certain precautions should be

taken.

● Turn off the water tap.

● Unscrew the inlet hose.

● Place the end of the inlet hose in a bowl

placed on the floor and let water drain out.

● Screw the water inlet hose back on.

● When you intend to start the machine up

again, make sure that the room temperature

is above 0°C.

IMPORTANT!

Every time you drain the water through the

emergency emptying hose you must pour 2

litres of water into the main wash

compartment of the detergent drawer and then

run the drain programme. This will activate the

ECO VALVE device avoiding that part of the

detergent remains unused at next washing.

Emergency emptying out

If the water is not discharged, proceed as

follows to empty out the machine:

● pull out the plug from the power socket;

● close the water tap;

● if necessary, wait until the water has cooled down;

● open the pump door;

● clean the pump if necessary as previously

described;

● screw the pump cover again and close the door.

126.2936.60:- 23/03/10 9:37 Página 39

Malfunction Possible Cause / Solution

The washing machine does not start:

The door has not been closed. E40.

• Close firmly the door.

The plug is not properly inserted in the power

socket.

• Insert the plug into the power socket.

There is no power at the socket.

• Please check your domestic electrical installation.

The main fuse has blown.

• Replace the fuse.

The selector dial is not correctly positioned and the

Start/Pause button has not been depressed.

• Please turn the selector dial and press the

Start/Pause button again.

The delay start has been selected.

• If the laundry are to be washed immediately,

cancel the delay start

The machine does not fill:

The water tap is closed. E10.

• Open the water tap.

The inlet hose is squashed or kinked. E10.

• Check the inlet hose connection.

The filter in the inlet hose is blocked. E10.

• Clean the water inlet hose filter.

The door is not properly closed. E40.

• Close firmly the door.

Something not working

IMPORTANT!

Certain problems are due to lack of simple maintenance or oversights, which can be solved

easily without calling out an engineer. Before contacting your local Service Centre, please carry

out the checks listed below.

During machine operation it is possible that the red Start/Pause pilot light flashes and one of the

following alarm codes appears on the display to indicate that the

machine is not working:

• E10: problem with the water supply

• E20: problem with water draining

• E40: door open.

Once the problem has been eliminated, press the Start/Pause button to restart the programme.

If after all checks, the problem persists, contact your local Service Centre.

126.2936.60:- 23/03/10 9:37 Página 40

Malfunction Possible Cause / Solution

The machine fills then empties

immediately:

The end of the drain hose is too low.

• Refer to relevant paragraph in «water drainage»

section.

The machine does not empty and/or

does not spin:

The drain hose is squashed or kinked. E20.

• Check the drain hose connection.

The drain pump is clogged. E20.

• Clean the drain pump.

The option has been selected.

• Select the Drain or Spin programmes

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

There is water on the floor:

Too much detergent or unsuitable detergent (creates

too much foam) has been used.

• Reduce the detergent quantity or use another one.

Check whether there are any leaks from one of the inlet

hose fittings. It is not always easy to see this as the

water runs down the hose; check to see if it is damp.

• Check the water inlet hose connection.

The inlet hose is damaged.

• Change it with a new one.

Unsatisfactory washing results:

Too little detergent or unsuitable detergent has been

used.

• Increase the detergent quantity or use another one.

Stubborn stains have not been treated prior to

washing.

• Use commercial products to treat the stubborn

stains.

The correct temperature was not selected.

• Check if you have selected the correct

temperature.

Excessive laundry load.

• Introduce into the drum less laundry.

126.2936.60:- 23/03/10 9:37 Página 41

The machine vibrates or is noisy:

The transit bolts and packing have not been

removed.

• Check the correct installation of the appliance.

The support feet have not been adjusted.

• Check the correct levelling of the appliance.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Maybe there is very little laundry in the drum.

• Load more laundry.

Malfunction Possible Cause / Solution

The door will not open:

The programme is still running.

• Wait the end of washing cycle.

The door lock has not been released.

• Wait about 2 minute.

There is water in the drum.

• Select drain or spin programme to empty out the

water.

Spinning starts late or the machine

does not spin:

The electronic unbalance detection device has cut in

because the laundry is not evenly distributed in the

drum. The laundry is redistributed by reverse rotation

of the drum. This may happen several times before

the unbalance disappears and normal spinning can

resume. If, after 10 minutes, the laundry is still not

evenly distributed in the drum, the machine will not

spin. In this case, redistribute the load manually and

select the spin programme.

● Redistribute the laundry.

The machine makes an unusual

noise

The machine is fitted with a type of motor which

makes an unusual noise compared with other

traditional motors. This new motor ensures a softer

start and more even distribution of the laundry in the

drum when spinning, as well as increased stability of

the machine.

No water is visible in the drum

Machines based on modern technology operate very

economically using very little water without affecting

performance.

126.2936.60:- 23/03/10 9:37 Página 42

Technical data

Dimensions Width

Height

Depth (inclunding the porthole)

60 cm

85 cm

64 cm

Water supply pressure Minimum

Maximum

0,05 MPa

0,8 MPa

Maximum Load 7 kg

Maximum

Spin Speed Mod. ZWH6105 1000 rpm

Mod. ZWH6125 1200 rpm

Electrical connection Voltage -

Overall power - Fuse

Information on the electrical connection is given on the rating

plate on the inner edge of the appliance door

If you are unable to identify or solve the

problem, contact our service centre.

Before telephoning, make a note of the model,

serial number and purchase date of your

machine: the Service Centre will require this

information.

Mod. ... ... ...

rod. No. ... ... ...

Ser. No. ... ... ...

126.2936.60:- 23/03/10 9:37 Página 43

Consumption values

Infos

The consumption data shown on this chart is to

be considered purely indicative, as it may vary

depending on the quantity and type of laundry,

on the inlet water temperature and on the

ambient temperature. It refers to the highest

temperature for each wash programme.

(*) The “Cottons 60° Eco” is the reference

programme for the data entered in the

energy label, in compliance with EEC

92/75 standards.

Programme

duration (in

minutes)

Programme

Energy

consumption

(in kWh)

Water

consumption

(in litres)

140Cotton 90º 2.15 71

160Cotton 60º Eco (*) 1.19 59

120Cotton 60º - Cold 1.47 63

65Delicate 40º - Cold 0.72 64

60Handwash 30º - Cold 0.47 58

60Wool 40º 0.35 52

153Jeans 40º 0.55 58

54Rinses 0.27 47

2Drain 0.27 -

12Spin --

44Soak 30º 0.45 23

90Synthetic 60º - Cold 0.97 56

126.2936.60:- 23/03/10 9:37 Página 44

Page is loading ...

Zanussi ZWH6105 User manual

Brand: Zanussi

Model: ZWH6105

Category: Washing machines

Type: User manual

This manual is also suitable for

ZWH6125

Download PDF

report

Zanussi ZWH6105 User manual

This manual is also suitable for

Zanussi ZWH6105 User manual

Related papers

Other documents