Aeg-Electrolux BP7304001M User manual

Brand: Aeg-Electrolux

Model: BP7304001M

Category: Cookers

Type: User manual

Aeg-Electrolux BP7304001M is an electric oven with a variety of functions to make cooking easier. It features automatic programs for various dishes, a core temperature sensor for precise cooking, and a pyrolytic cleaning function for effortless maintenance. The oven also includes a range of accessories, such as a wire shelf, baking tray, grill/roasting pan, and core temperature sensor, providing versatility for different cooking tasks.

BP7304001

OVEN USER MANUAL

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler – features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

ACCESSORIES AND CONSUMABLES

In the AEG webshop, you’ll find everything you need to keep all your AEG

appliances looking spotless and working perfectly. Along with a wide range of

accessories designed and built to the high quality standards you would expect,

from specialist cookware to cutlery baskets, from bottle holders to delicate

laundry bags…

Visit the webshop at:

www.aeg.com/shop

CONTENTS

4 Safety information

7 Product description

9 Before first use

10 Control panel

12 Daily use

14 Clock functions

16 Automatic programmes

17 Using the accessories

19 Additional functions

22 Care and cleaning

25 What to do if…

26 Environment concerns

27 Installation

29 Guarantee/Customer Service

Centres

The following symbols are used in this user

manual:

Important information concerning your

personal safety and information on how to

avoid damaging the appliance.

General information and tips

Environmental information

Subject to change without notice.

Contents

SAFETY INFORMATION

Before the installation and use, read this manual carefully:

• For your personal safety and the safety of your property

• For the respect of the environment

• For the correct operation of the appliance.

Always keep these instructions with the appliance also if you move or sell it.

The manufacturer is not responsible if incorrect installation or use results in damage.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning use of the appliance in safe

way and understand the hazards involved. Children shall not play with the appliance.

• Keep all packaging away from children. There is the risk of suffocation or physical injury.

• WARNING: Keep children and animals away from the appliance when the door is open

or the appliance is in the operation, because it becomes hot. There is the risk of injury or

other permanent disability.

• If the appliance has Child Lock or Key Lock (Control Lock) function, use it. It prevents

children and animals from accidental operation of the appliance.

General safety

• Do not change the specifications of this appliance. There is the risk of injury and damage

to the appliance.

• Do not let the appliance stay unattended during operation.

• Switch off the appliance after each use.

Installation

• Only an approved electrician can install and connect the appliance. Contact an approved

service centre. This is to prevent the risks of structural damage or physical injury.

• Make sure that the appliance is not damaged because of transport. Do not connect a

damaged appliance. If necessary, contact the supplier.

• Remove all packaging, stickers and layers from the appliance before first use. Do not re-

move the rating plate. It can invalidate the guarantee.

• Make sure that the appliance is disconnected from the power supply during the installa-

tion.

• Be careful when you move the appliance. The appliance is heavy. Always use safety

gloves. Do not lift the appliance by the handle.

• The electrical installation must have an isolation device which lets you disconnect the

appliance from the mains at all poles. The isolation device must have a contact opening

width of minimum 3 mm.

• You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips and contactors.

4 Safety information

• Before the installation, make sure that the kitchen cabinet has the recess dimensions ap-

plicable.

• Make sure that the appliance is installed below and adjacent safe structures.

• Keep the minimum distances to the other appliances and units.

• The appliance cannot be positioned on a base.

• Built in ovens and built in cooking surfaces are attached with special connection system.

To prevent damage to the appliance, only use an appliance with the appliances from the

same manufacturer.

Electrical connection

• The appliance must be earthed.

• Make sure that the electrical data on the rating plate agree with your domestic power

supply.

• Information on the voltage is on the rating plate.

• Always use a correctly installed shockproof socket.

• Do not use multi-way plugs, connectors and extension cables. There is the risk of fire.

• Do not replace or change the mains cable. Contact the service centre.

• Make sure not to squash or cause damage to the mains plug (if applicable) and cable

behind the appliance.

• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug – if

applicable.

Use

• The appliance is only for domestic use. Do not use the appliance for commercial and in-

dustrial use.

• Only use the appliance for domestic cooking tasks. This is to prevent physical injury to

persons or prevent damage to property.

• Do not use the appliance as a work surface or storage surface.

• The interior of the appliance becomes hot during use. There is the risk of burns. Do not

touch the heating elements in the appliance. Use gloves when you insert or remove the

accessories or pots.

• Be careful when you remove or install the accessories to prevent damage to the oven

enamel.

• Always stay away from the appliance when you open the door while the appliance is in

operation. Hot steam can release. There is the risk of skin burns.

• To prevent damage or discoloration to the enamel:

– Do not put any objects directly on the appliance floor and do not cover it with alumi-

nium foil.

– Do not put water directly into the hot appliance.

– Do not keep moist dishes and food in the appliance after you finish the cooking.

• Discoloration of the enamel has no effect on the performance of the appliance so it is

not a defect in the sense of the warranty law.

• Do not apply pressure on the open door.

Safety information

• Always close the appliance door when you cook, even while grilling.

Care and cleaning

• Before maintenance, switch off the appliance and disconnect the appliance from the

power supply.

• Before maintenance, make sure that the appliance is cold. There is the risk of burns.

There is the risk that the glass panels can break.

• Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a

fire.

• Regular cleaning prevents the surface material from deteriorating

• Use a deep baking tray for very moist cakes to prevent that fruit juices cause stains that

can be permanent.

• For your personal safety and the safety of your property, only clean the appliance with

water and a soap. Do not use flammable products or products that can cause corrosion.

• Do not clean the appliance with steam cleaners, high-pressure cleaners, sharp objects,

abrasive cleaning agents, abrasive sponges and stain removers

• If you use an oven spray, follow the instructions from the manufacturer.

• Do not clean the glass door with abrasive cleaning agents or metal scraper. Heat resist-

ant surface of the inner glass can break and shatter.

• When the door glass panels are damaged they become weak and can break. You must

replace them. Contact the service centre.

• Be careful when you remove the door from the appliance. The door is heavy!

• Do not clean catalytic enamel (if applicable).

Risk of fire

• Open the door carefully. The use of ingredients with alcohol can cause a mixture of alco-

hol and air. There is the risk of fire.

• Do not let sparks or open flames come near the appliance when you open the door.

• Do not put flammable products or items that are wet with flammable products, and/or

fusible objects (made of plastic or aluminium) in, near or on the appliance.

Pyrolytic cleaning

WARNING!

Risk of burns.

• Keep children away from the appliance while the Pyrolytic cleaning is in operation. The

appliance becomes very hot.

• Provide good ventilation during and after each Pyrolytic cleaning.

• Remove any pets (especially birds) from the vicinity of the oven location during and after

the Pyrolytic cleaning and first use maximum temperature operation to a well ventilated

area.

• Read carefully all the instructions for Pyrolytic cleaning.

6 Safety information

Oven lamp

• The type of light bulb or halogen lamp used for this appliance is only for household ap-

pliances. Do not use it for house lighting.

• If it becomes necessary to replace the lamp, use one of the same power and specifically

designed for household appliances only.

• Disconnect the appliance from the power supply before the replacement of the oven

lamp. There is the risk of electrical shock.

Service centre

• Only an approved engineer can repair or work on the appliance. Contact an approved

service centre.

• Use only original spare parts.

Disposal of the appliance

• To prevent the risk of physical injury or damage

– Disconnect the appliance from the power supply.

– Cut off the mains cable and discard it.

– Discard the door catch. This prevents children or small animals from being closed in-

side of the appliance. There is the risk of suffocation.

PRODUCT DESCRIPTION

General overview

Product description 7

Control panel

Electronic programmer

Socket for the core temperature sensor

Heating element

Oven lamp

Fan

Rear wall heating element

Bottom heat

Shelf support, removable

Shelf positions

Accessories

• Wire shelf

For cookware, cake tins, roasts.

• Baking tray

For cakes and biscuits.

• Grill / roasting pan

To bake and roast or as pan to collect fat.

8 Product description

• Core Temperature Sensor

To measure how far the food is cooked.

BEFORE FIRST USE

WARNING!

Refer to "Safety information" chapter.

Initial Cleaning

• Remove all parts from the appliance.

• Clean the appliance before first use.

Refer to chapter "Care and Cleaning".

First connection to the mains

After first connection to the mains all symbols in the display are on for some seconds. For

the subsequent few seconds the display shows software version.

First setting the time of day

After the software version goes off, the display shows "h" and "12:00".

Setting the time of day:

1. Touch

or to set hours.

2. Touch

or .

3. Touch

or to set minutes.

4. Touch

or .

The Temperature/Time display shows new time.

Changing the time of day

You can change the time of day only if the appliance is off.

Touch

. flashes in the display. To set new time of day use the above procedure.

Before first use 9

CONTROL PANEL

Electronic programmer

2 3 4 5 6 7 8 9 10

Use the sensor fields to operate the appliance.

Sensor Field Function Description

- DISPLAY Shows the current settings of the appliance.

ON/OFF To activate and deactivate the appliance.

OPTIONS To set an oven function or programme.

Straight access to the oven function when the

appliance is off.

MY FAVOURITE PRO-

GRAMME

You can store your favourite programme. Use it

to access your favourite programme directly, also

when the appliance is off.

TEMPERATURE / FAST

HEAT UP

To set and examine cavity temperature or core

temperature sensor temperature. If you press it

and hold for three seconds, it turns Fast heat up

function ON and OFF.

Straight access to the temperature setting of

the first oven function when the appliance is

off.

UP, DOWN To choose an oven function, clock function and

to set the minute minder, temperature or time of

day.

OK To confirms the selection or setting.

OVEN LIGHT To set the oven lamp on or off.

CLOCK To set the clock function.

MINUTE MINDER To set the minute minder.

10 Control panel

Display

1 2 3

5 47

Oven function symbol

Temperature/Time display

Clock/Residual heat display (also Minute minder and Time of day)

Residual heat indicator

Indicators for the clock functions (refer to the table "Clock functions")

Heat up indicator

Number of oven function/programme

Other indicators of display

Symbols Name Description

Function You can choose an oven function.

Automatic programme You can choose an oven programme.

My favourite programme The favourite programme operates.

kgr/gr An oven programme with weight input operates.

h/min A clock function operates.

Temperature / fast heat up The function operates.

Temperature You can examine or change the temperature.

Core temperature sensor The core temperature sensor is in the core temperature

sensor socket.

Door lock The door lock function operates.

Oven light The oven light is off.

Minute minder The minute minder function operates.

Heat up indicator

If you set an oven function, the bars in the display come on one by one. The bars show

that the temperature in the appliance increases or decreases.

When the appliance is at the set temperature Heat up indicator goes off the display.

Control panel

DAILY USE

WARNING!

Refer to "Safety information" chapter.

To operate the appliance you can use:

• manual mode -to set an oven function, the temperature and the cooking time manually.

• automatic programmes -to prepare a dish when you do not have a knowledge or expe-

rience in cooking.

Setting the oven function

1. Touch .

The display shows a preset temperature, symbol and number of the oven function.

flashes in the display.

2. Touch

or to set an oven function.

3. Touch

or the appliance starts automatically after five seconds.

If you activate the appliance with or and do not set any oven function or programme

the appliance will deactivate automatically after 20 seconds.

Oven function Application

1 True Fan Cooking To bake maximum on three shelf positions at the same time.

Decrease the oven temperatures (68-104 °F) compared with

Conventional. And to dry food.

2 Pizza Setting To bake on one shelf position food with a more intensive

browning and a crispy base. Decrease the oven temperatures

(68-104 °F) compared with Conventional cooking.

3 Slow Cook To prepare very lean, tender roasted food.

4 Conventional

Cooking

To bake and roast food on one shelf position.

5 Frozen Foods To make your convenience food like e.g. French Fries, Wedg-

es, spring rolls crispy.

6 Turbo Grilling To roast larger meat joints or poultry with bones on one

shelf position. Also to gratinate and to brown.

7 Fast Grilling To grill flat food in large quantities. To toast bread.

8 Grilling To grill flat food in the middle of the grill. To toast bread.

9 Keep Warm To keep food warm.

10 Defrost To defrost frozen food.

12 Daily use

Oven function Application

11 Bottom Heat To bake cakes with a crispy base, and to preserve food.

12 ECO Roasting ECO functions let you to optimize the energy consumption

during cooking. Thus it is necessary to set the cooking time

first. To get more information about the recommended set-

tings, refer to the cooking tables with the equivalent usual

oven function.

13 Pyro Cleaning For automatic pyrolytic cleaning of the oven. The oven tem-

perature is at approximately 932 °F. It burns off residual dirt

in the oven. This can then be removed with a cloth when the

oven is cold.

Changing the oven temperature

Touch / to change the temperature in steps of 41 °F.

When the appliance is at the set temperature, an acoustic signal operates three times and

the Heat up indicator goes off.

Examining the oven temperature

You can examine the temperature in the appliance when the function or programme oper-

ates.

1. Touch

The Temperature/Time display shows the temperature in the appliance.

If you want to change the oven temperature, touch one more time and use or .

2. Touch

to go back to the set temperature or the display will show it automatically

after five seconds.

Fast heat up function

The fast heat up function decreases the heat up time.

Do not put food in the oven when the fast heat up function operates.

Activating the fast heat up function: Touch and hold

for more then three seconds.

If you activate the fast heat up function, the bars on the display

flash one by one to

show that the function operates.

The fast heat up is not available with every oven function. An acoustic signal operates if the

fast heat up is not available for set function.

Daily use

Energy saving

The appliance has some features that help you save energy during everyday cooking:

• Residual heat:

– the oven function or programme operates: the heating elements are deactivated 10%

time earlier (the lamp and fan continue to operate). The condition: the cooking time is

longer then 30 minutes or you use the clock functions (Duration, End, Time delay).

– the oven is off: you can use the heat to keep the food warm. The indication: the clock/

Residual heat display shows the remaining temperature, the bars show the decreasing

temperature.

• Oven lamp off - touch

to deactivate the oven lamp during cooking;

• Display off - if necessary, deactivate the appliance. Touch

and at the same time

until the display goes out (or on).

• Eco functions - refer to "Oven function".

CLOCK FUNCTIONS

SYMBOL FUNCTION DESCRIPTION

COUNT UP TIMER To set count up. It shows how long the appliance operates.

This function has no effect on the operation of the appliance.

TIME OF DAY To examine the time of day. For changing the time of day re-

fer to 'Setting the time of day'.

DURATION To set how long the appliance operates.

END To set when the appliance deactivates. You can use Duration

and End at the same time (Time delay), if the appliance is to

be activate and deactivate automatically later.

SET+GO To start the appliance with necessary settings with only one

touch of the sensor field, any time later.

Count Up Timer

Use the Count Up Timer to monitor how long the appliance operates. It is on immediately

when the appliance starts to heat.

Reset the Count Up Timer: touch

again and again until flashes in the display. Touch

until the display shows "00:00" and the Count Up Timer starts to count up again.

You can not use Count Up Timer when Duration or End is set.

Setting the DURATION

1. Activate the appliance and set an oven function and temperature.

14 Clock functions

2. Touch again and again until the dis-

play shows

flashes in the display.

3. Use

or to set minutes for DURA-

TION.

4. Touch

to confirm

5. Use

or to set hours for DURATION.

If you touch or during setting hours for DURATION, the appliance goes to setting of

the END function.

6. When the set time ends, an acoustic signal operates for two minutes.

symbol and time setting flash in the display. The appliance deactivates.

Touch any sensor field or open the oven door to stop an acoustic signal.

7. Deactivate the appliance.

Setting the END

1. Activate the appliance and set an oven function and temperature.

2. Touch

again and again until the display shows .

flashes in the display.

3. Use

or to set END (first you set minutes and then hours) and or to

confirm.

4. When the set time ends, an acoustic signal operates for two minutes.

symbol and time setting flash in the display. The appliance deactivates.

5. Touch any sensor field or open the oven door to stop an acoustic signal.

6. Deactivate the appliance.

Setting the SET+GO

To start of the appliance with necessary settings with only one touch of the sensor field,

any time later.

1. Set an oven function (or programme) and temperature (refer to "Setting the oven

function" and "Changing the oven temperature").

2. Set DURATION (refer to "Setting the DURATION").

3. Touch

again and again until will flash in the display.

4. Touch

to set the SET+GO function.

The display shows

and with a dot. This dot shows which clock function is activa-

ted.

5. Touch any sensor field (apart from ON/OFF) to start the SET+GO function.

You can use SET+GO function only if DURATION is set.

Check result (selected models only)

If you set END or DURATION function, 2 minutes before end of cooking an acoustic signal

sounds and lamp activates. The appliance goes to the setting of the END or DURATION

Clock functions 15

function. During these two minutes you can examine the cooking results and, if necessary,

add END or DURATION time.

Setting the Time delay function

DURATION and END can be used at the same time, if the oven is to be switched on

and off automatically later. In this case first set DURATION

and then END function

(refer to "Setting the DURATION" and "Setting the END ").

When the Time delay function is activated the display shows static symbol of the oven

function,

with a dot and . The dot shows which clock function is on in the Clock/

Residual heat display.

Setting the MINUTE MINDER

Use the MINUTE MINDER to set a countdown (maximum 23 h 59 min). This function has no

effect on the operation of the oven. You can set the MINUTE MINDER any time, also if the

appliance is off.

1. Touch

and "00" flash in the display.

2. Use

or to set MINUTE MINDER.

First you set seconds and then minutes

and hours.

3. Touch

or the MINUTE MINDER starts

automatically after five seconds.

4. When set time ends, an acoustic signal

operates for two minutes and "00:00"

and

flash in the display.

5. Touch any sensor field or open the oven door to stop an acoustic signal.

AUTOMATIC PROGRAMMES

WARNING!

Refer to "Safety information" chapter.

There are 20 automatic programmes and recipes. Use an automatic programme or recipe

when you do not have a knowledge or experience how to prepare a dish. You can find the

recipes for the automatic programmes in the "Recipe book".

There are three types of automatic programmes:

• Automatic recipes;

• Automatic programmes with weight input;

• Automatic programmes with core temperature sensor;

Automatic recipes

Setting an automatic recipe:

1. Touch

two times until the display shows .

The display shows symbol and number of the automatic programme.

16 Automatic programmes

2. Touch or to choose the automatic recipes.

3. Touch

or the automatic recipe activates automatically after five seconds.

4. When set time ends, an acoustic signal operates for two minutes. Symbol

flashes.

The appliance deactivates.

5. Touch any sensor field or open the oven door to stop an acoustic signal.

Automatic programmes with weight input

If you set the weight of the meat, the appliance calculates the roasting time.

1. Touch

again and again until the display shows .

2. Touch

or to set the weight programme (refer to "Recipe book").

The display shows: cooking time, duration symbol

, a default weight, a unit of

measurement (kg, g).

3. Touch

or the settings save automatically after five seconds.

4. The appliance starts. A symbol of the weight unit flashes in the display. During this

time you can change the default weight value with

or . Touch .

5. When set time ends, an acoustic signal operates for two minutes.

flashes.

The appliance deactivates.

6. Touch any sensor field or open the oven door to stop an acoustic signal.

Automatic programmes with core temperature sensor

The core temperature of the food is default and fixed in programmes with core temperature

sensor. The programme ends when the appliance is at the set core temperature.

1. Touch

again and again until the display shows .

2. Install the core temperature sensor (refer to "The core temperature sensor").

3. Touch

or to set the core temperature sensor programme.

When a core temperature sensor programme is set, the display shows the cooking

time,

and .

4. Touch

or the settings save automatically after five seconds.

5. When set time ends, an acoustic signal operates for two minutes.

flashes.

The appliance deactivates.

6. Touch any sensor field or open the oven door to stop an acoustic signal.

USING THE ACCESSORIES

WARNING!

Refer to "Safety information" chapter.

The core temperature sensor

The core temperature sensor measures the core temperature of the meat. When the meat is

at the set temperature, the appliance deactivates.

There are two temperatures to set:

• The oven temperature: refer to the table for roasting in the recipe book.

Using the accessories

• The core temperature: refer to the table for the core temperature sensor in the recipe

book.

Only use the core temperature sensor supplied or original replacement parts.

1. Activate the appliance.

2. Put the point of the core temperature

sensor (with the symbol

on the

handle) into the centre of the meat.

3. Put the plug of the core temperature

sensor into the socket at the front of

the appliance.

The display shows a flashing symbol

and the default set core tempera-

ture. The temperature is 140 °F during

the first use, and the last set value dur-

ing each subsequent use.

4. Touch

or to set the core temper-

ature.

5. Touch

or the settings save auto-

matically after 5 seconds.

You can set the core temperature only when the symbol flashes. If the display shows a

static symbol

before you set the core temperature, use and or to set a new

value.

6. Set the oven function and, if necessary, the oven temperature.

The display shows the current core temperature and

(which shows the relation be-

tween the set oven temperature and the current oven temperature).

The core temperature sensor must stay in the meat and in the socket during the cooking.

While the appliance calculates the approximate duration time, the value of the Count Up

Timer function shows in the Timer/Residual heat display. When the first calculation ends,

the Timer/Residual heat display shows -, and then the approximate duration of the cooking.

The appliance continues to calculate the duration during the cooking. The display updates

at intervals with the new duration value.

When the meat is at the set core temperature, the core temperature and

flash. An

acoustic signal sounds for two minutes.

Touch a sensor field to deactivate the acoustic signal.

8. Remove the core temperature sensor from the socket and remove the meat from the

appliance.

WARNING!

Be careful when you remove the core temperature sensor. It is hot. There is a risk of burns.

9. Deactivate the appliance.

18 Using the accessories

When you put the core temperature sensor into the socket, you cancel the settings for the

clock functions.

When you cook with the core temperature sensor, you can change the temperature shown

in the Temperature/Time display. After you put the core temperature sensor in the socket

and set an oven function and temperature, the display shows the current core temperature.

Touch

again and again to see three other temperatures:

• The current core temperature

• The oven set temperature

• The current oven temperature.

The set core temperature changes into current core temperature and current oven temper-

ature changes into set oven temperature.

Installing the Oven Accessories

The deep pan and the wire shelf have side edges.

These edges and the shape of the guide-bars cau-

ses the anti-tilt safety for the oven accessories.

Installing the wire shelf and the deep pan to-

gether

Put the wire shelf on the deep pan. Push the deep

pan between the guide-bars of one of the oven

levels.

ADDITIONAL FUNCTIONS

My Favourite Programme function

Use this function to save your favourite settings of temperature and time for an oven func-

tion or programme.

Additional functions 19

1. Set the temperature and time for an oven function or programme.

2. Touch and hold

for more than three seconds.

An acoustic signal sounds.

3. Deactivate the appliance.

Using My Favourite Programme function:

• To activate the function touch

. The appliance activates your favourite programme.

• To deactivate the function touch

. The appliance deactivates your favourite pro-

gramme.

When the function operates, you can change the time and temperature.

Child Lock

The Child Lock prevents an accidental operation of the appliance.

Activating and deactivating the Child Lock function:

1. Deactivate the appliance with

. Do not set an oven function.

2. Touch and hold

and at the same time for 2 seconds. An acoustic signal sounds.

SAFE comes on/goes out in the display.

If the oven has Pyro Cleaning function, the door is locked.

SAFE comes on in the display when you touch a sensor field.

Control lock

You can activate the function only when the appliance operates. The Control Lock prevents

an accidental change of the oven function.

Activating/deactivating the control lock function:

1. Activate the appliance.

2. Activate an oven function or setting.

3. Touch and hold

and at the same time for 2 seconds. An acoustic signal sounds.

Loc comes on/goes out in the display.

You can deactivate the appliance when the control lock is on. When you deactivate the ap-

pliance, the control lock deactivates.

If the oven has the Pyro cleaning function, the door is locked.

Loc comes on in the display when you touch a sensor field.

Settings menu

The settings menu lets you to add or remove functions from the main menu (for example:

you can set on or off the Residual heat indicator). Settings menu has maximum eight set-

tings (from SET1 to SET8). The number of the settings is different for different models. Look

into the table below to see the possible value of each setting.

Settings menu

Indicator of the setting menu Description Value to set

SET1 SET+GO ON/OFF

20 Additional functions

Page is loading ...

Aeg-Electrolux BP7304001M User manual

Brand: Aeg-Electrolux

Model: BP7304001M

Category: Cookers

Type: User manual

Download PDF

report

Aeg-Electrolux BP7304001M User manual

Aeg-Electrolux BP7304001M User manual

Related papers

Other documents