Panasonic VDRM30EN Operating instructions

Brand: Panasonic

Model: VDRM30EN

Type: Operating instructions

This manual is also suitable for

VDR-M30/50/70 DVD Camcorders, Computer

Installation trouble shooting Guide

1. Camcorder not installing, Windows giving an error message when the

camcorder was plugged

in.

Resolution

First please ensure that the ‘DVD RAM Driver’ has been installed from the

included CD ROM. This can be checked in Add/Remove Programs, in ‘Control

Panel’

After this has been confirmed you will need to check ‘Device Manager’ to get into

device manager you will need to RIGHT CLICK on ‘My Computer’ and select

‘Properties’. Select the ‘Hardware’ TAB and then click device manager. You will find

the DVD Camera under ‘Universal Serial Bus controllers (See Below).

You will then need to remove the device from ‘Device manager’. To do this RIGHT

CLICK on the Panasonic device and select ‘Uninstall’

After this has been done please ensure that the Panasonic CD ROM is inserted in the

CD ROM drive on the computer. You will then need the computer to re-install the

DVD camcorder. To do this RIGHT CLICK on ‘Universal Serial Bus controllers’ and

select ‘Scan for Hardware changes’. The computer should then display ‘Found new

Hardware’ and display this Option.

On this option you will need to select ‘No, not at this time, and CLICK Next. This

option will then appear….

Select the ‘Install the software automatically’ option and then click next this should

then install the USB Interface. If the windows LOGO testing message appears select

‘Continue anyway’ (See Below)

The computer should then display a confirmation Screen (See below)

CLICK ‘Finished’

The computer should then display found new hardware again for the USB-SCSI

controller…

Again Select ‘Install the software automatically’. This should then install the USB –

SCSI controller. If The Windows LOGO testing message appears click ‘Continue

anyway’ (See below)

Again you should see a confirmation screen (See below)

CLICK ‘Finish’

To confirm that the Drive has been created open ‘My Computer’. You should see 2

NEW drives an ‘MX80’ and ‘Removable Disc’ (See Below). Please note that the

Drive below that says VDR_M30 is the Panasonic CD ROM that came with the

camcorder NOT the Camcorder itself.

2. After Installation of the camcorder is confirmed the following error message

appears in the DVD Movie Album software:-

Resolution –

The problem is caused because the DVD Movie album software is trying to use the

wrong drive on the computer, you will need to change which drive is being used in

the preferences:

First CLICK the ‘Preference’ Button on this message.

The preference window will then be displayed; you need to CLICK on ‘Device

Setting’. Then from the Drop down box in ‘Drive select’ Highlight the ‘MX80’ drive

and CLICK ‘OK’(See Below)

Once you have CLICKED ‘OK’ the previous screen will appear and your video clips

should then start to appear on the right hand side (See Below)

You are now able to use the software to EDIT or EXPORT the video clips, for further

Help in doing this please see the built in instruction book. CLICK on the ‘?’ and

select ‘DVD-MovieAlbum Manual. (See Below)

3. After Installation of the camcorder is confirmed the following error message

appears in DVD movie album:-

Resolution –

Please make sure that no other application is trying to access the ‘MX80’ drive. Also

if ROXIO easy CD Creator is installed on the computer, it will cause this problem.

You will need to uninstall ROXIO software in order to use the DVD movie album

software.

1
2
3
4
5
6
7
8
9

Panasonic VDRM30EN Operating instructions

Brand: Panasonic

Model: VDRM30EN

Type: Operating instructions

This manual is also suitable for

Download PDF

Related papers

Other documents