User Manual
Large Solar Lantern Light | 1LED | HARMONY
MODEL: L116
For more information visit
hoselink.com.au
or call
1300 900 617
Cultivating Connections
MODEL: L116
Large Solar Lantern Light
1LED | HARMONY Specifications
Solar panel 2V
LED lumens 2 Lumens
Working time 6-8 hours
Lithium battery 1.2V/300mAh
Light temperature 2800-3200K
Charge time 10 hours
Similar to our Decorative Lantern Light, but bigger!
This dynamic lantern light can sit on a table or hang in the
garden. The light emits dim mood lighting that creates a
large patterned effect, which sits beautifully against any
outdoor backdrop. Made from powder-coated steel, this
light looks stunning in the middle of the day too.
Kit Contents:
1 x Large Lantern Light
PRODUCT INSTALLATION
Option 1 - Placing the light:
Simply place the light in the desired location. Be mindful
that the solar panel needs access to direct sunlight to
charge.
Option 2 - Hanging handle:
All the hard work is done for you! Simply hang the light
in your desired location.
1
2
ACTIVATE LIGHT
To activate the light, lift the round solar panel from
the lantern and slide the switch to ‘on’. Test the light by
covering the solar panel and checking that the light
comes on. The built-in intelligent light sensor will illuminate
automatically at night and turn off at dawn.
NOTE: If the light does not turn on this could be due to
the battery not being sufficiently charged. Leave it out in
direct sunlight for 6 – 8 hours and try again.
MODEL: L116
Large Solar Lantern Light | 1LED | HARMONY
Cultivating Connections
For more information visit
hoselink.com.au
or call
1300 900 617
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
SolaDyne 7451 Operating instructions
-
Harbor Freight Tools 91771 Assembly And Operating Instructions Manual
-
Lenmar Enterprises SOLV17 User manual
-
Sealite SL-C510 Installation guide
-
-
-
-
-
-
