Sol-Go

Roton INDUSTRIES Sol-Go Installation guide

  • Hello! I have analyzed the provided instructions for the Roton Solar DIY Install Kit. This document describes the components included in the kit, such as the pre-wired PV cables, power harness with fuse, and various ring terminals, and mentions that the kit also includes a waterproof cable inlet. The kit is intended for easy solar panel installation and connection to a battery(which is not included). I'm ready to answer any questions you have about its installation or components.
  • Does the kit include a battery?
    Are the MC4 connectors pre-installed?
    Can i connect two solar panels in series?
www.roton.ca
Mar 1, 2022
Page 1 of 1
Roton Solar
DIY Install Kit
Roton Solar DIY Install Kit
panel(s) and controller vary per kit
battery not included
Both 5/16” and 3/8” ring
terminals are provided
10AWG Power harness
w/ fuse holder & fuse
Waterproof cable
inlet provided
Both 5/16” and 3/8” ring
terminals are provided
Pair of 30’ PV #10 cables
With MC4s pre-installed
Connect MC4s directly to single panel,
or use optional jumper for 2 panels in series
* Ensure +/- Polarity is correct *
++ --
/