LUXRITE LR24920 Installation guide

LR24920
Brand
LUXRITE
Model
LR24920
Type
Installation guide

This manual is also suitable for

LUXRITE LR24920 is a versatile and efficient 4-inch 5 CCT Trimless Recessed Downlight designed to provide customizable lighting solutions for various applications. With its adjustable color temperature ranging from warm white to cool white, this recessed downlight allows you to tailor the ambiance and mood of your space. It features simple installation, including a plaster frame that secures to the drywall hole and a hardwire box for connecting the electrical supply. The fixture easily attaches to the plaster frame, providing a seamless and elegant finish.

LUXRITE LR24920 is a versatile and efficient 4-inch 5 CCT Trimless Recessed Downlight designed to provide customizable lighting solutions for various applications. With its adjustable color temperature ranging from warm white to cool white, this recessed downlight allows you to tailor the ambiance and mood of your space. It features simple installation, including a plaster frame that secures to the drywall hole and a hardwire box for connecting the electrical supply. The fixture easily attaches to the plaster frame, providing a seamless and elegant finish.

www.allstarlighting.com
INSTALLATION GUIDE
LR24920
33 Randolph Ave. • Avenel NJ 07001 | 732-882-1500 1
4” 5 CCT TRIMLESS RECESSED DOWNLIGHT
IMPORTANT: READ ALL INSTRUCTIONS BEFORE INSTALLING FIXTURES. KEEP
FOR FUTURE REFERENCE.
SAFETY: FOR YOUR SAFETY, THIS FIXTURE MUST BE WIRED IN ACCORDANCE TO
LOCAL ELECTRICAL CODES AND ORDINANCES. ALL WORK SHOULD BE DONE BY
A QUALIFIED ELECTRICIAN.
WARNING: MAKE SURE POWER IS OFF FROM THE ELECTRICAL PANEL BEFORE
STARTING INSTALLATION OR ATTEMPTING ANY MAINTENANCE. INDOOR
INSTALLATION ONLY.
TOOLS REQUIRED: SAW, MEASURING TAPE, ELECTRICAL WIRING (USE TAPE
AND GAUGE SUITABLE FOR APPLICATION TO CONNECT THE FIXTURES.
PRE-INSTALLATION:
1. Turn power OFF from the electrical panel before starting installation.
2. Locate a suitable position to place the fixture and open in accordance to the cut-hole
dimensions (refer to Hole Cut Table for appropriate size)
3. Run electrical wire from the switch (power supply) through the mounting hole –use
NMD90 Romex or BX cable.
4. Align the inside edge of the Zer Clearance plaster frame to the drywall hole and
screw in place. (Fig. 1)
5. Plaster over the plaster frame, e careful not to fill past raised rim. (Fig. 2)
DRIVER WIRING:
1. Open the hardwire box swing cover and remove the appropriate knockout(s).
2. Insert the electrical supply cable through the knockout and secure with a cable
connector (sold sepparately).
3. Using wire nuts, connect green ground wire of cable to green wire on box. Connect
black wire of cable to black wire of box. (Fig. 3)
4. Place all wiring and connections back into the box and close the cover.
5. Insert hardwire box through the mounting hole. (Fig. 4)
NEW CONSTRUCTION APPLICATIONS: Hardwire box shall be firmly secured to
studs, joists, or similar fixed structura units.
REMODEL APPLICATIONS: Do not require the hardwire box to be firmly secured after
the mounting plates, studs, joists, or structural units have been concealed.
FIXTURE INSTALLATION:
1. Connect the fixture to the hardwire box by inserting and twisting the male/female
connectors. (Fig. 3)
2. Insert the fixture to the plaster frame, secure the lamp by twisting the fixture
appropriately to the plaster frame. (Fig. 4)
3. Once assembly is complete, turn on power to confirm fixture is working properly.
3” Cutting Diameter:
3.75” (95mm) TWIST
Fig. 3
Fig. 4
Fig. 2
Cable to fixture
White wire
Black wire
Power
supply
Quick connect
push-in terminals
Quick connect
push-in terminals
Fig. 1
Make sure to install plaster frame with arrow pointing upwards
(towards the ceiling)
Fig. 5
Ø6”
Ø3”
  • Page 1 1

LUXRITE LR24920 Installation guide

LR24920
Brand
LUXRITE
Model
LR24920
Type
Installation guide
This manual is also suitable for

LUXRITE LR24920 is a versatile and efficient 4-inch 5 CCT Trimless Recessed Downlight designed to provide customizable lighting solutions for various applications. With its adjustable color temperature ranging from warm white to cool white, this recessed downlight allows you to tailor the ambiance and mood of your space. It features simple installation, including a plaster frame that secures to the drywall hole and a hardwire box for connecting the electrical supply. The fixture easily attaches to the plaster frame, providing a seamless and elegant finish.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents