MOJOGEAR MG-33 User manual

Type
User manual

This manual is also suitable for

W64
2500K~6500K
Cap acity : 2000m Ah
W64 MULTI COLOR
MINI LED LIGHT + KIT
MANUAL
Thank you for purchasing this MOJOGEAR W64 Multi
Color Mini LED light. We hope it will help you to unleash
your creativity and create better videos.
If you have any questions or feedback, please let us know
at support@mojogear.eu. We’d love to hear from you!
Introduction
Do not use the light near explosive gases or
flammable materials.
Do not burn or incinerate the product.
Do not expose the lamp to excessive heat, such as
direct sunlight or fire. The product should not be used
when the temperature is above 40°C.
This product is not fully waterproof. Please pay
attention when using in wet conditions.
Do not charge the light in damp or wet conditions.
Keep out of reach of children.
Safety instructions
Battery instructions
This product contains a rechargeable lithium battery.
To charge the battery, please use a suitable charger.
Rechargeable lithium batteries have a limited lifespan.
Over time, the capacity of the battery will decrease.
If you haven’t used the product for a long time, please
charge the battery before using the product.
To extend the lifespan of the battery, it’s recommended
to charge the light once every three months.
MOJOGEAR creates high-quality products for
smartphone filmmakers, mobile journalists and
everyone else who wants to get the most out of
their phone or camera.
MOJOGEAR is proudly based in The Netherlands.
If you have any questions or feedback, please
let us know at support@mojogear.eu.
We’d love to hear from you!
Warranty
All MOJOGEAR products are covered by a
2-year warranty, calculated from the date of purchase.
Product Specifications
Color temperature 2500K–6500K
Brightness 850 lux @ 0.3m
Color rendering index ≥90
Brightness adjustment range 0 100%
Maximum power consumption 6W
Input
Dimensions 71 x 84 x 25 mm
94 g
USB-C
Weight
Battery capacity 2000 mAh
Buttons and parts
Package contents
LED light USB-C
charging cable
KIT only:
Suction cup
Cold shoe mount (3x)
Power button
Battery indicator
USB-C charging port
Cold shoe base
Color temperature adjustment
Brightness adjustment
How to use
Power button
Hold for 2 seconds to turn on/off
Left knob (CT) adjusts color temperature
Right knob (DIM) adjusts brightness
Turn the wheel to adjust the
color tempature (from 2500K to 6500K)
Turn the wheel to adjust the
brightness
W64 MULTI COLOR
MINI LED KIT
SUCTION CUP
The suction cup is only included with
the KIT version of this LED light.
Firmly press the suction
cup against the surface.
Close the lock.
Open the lock on
the suction cup.
Before applying the
suction cup, remove
the plastic film.
For extra grip, stick the
included double-sided
sticker on the surface,
before you attach
the suction cup.
With the suction cup, you can easily
mount your LED light to a laptop,
monitor or other surface.
Before use How to to remove the suction cup
Screw the LED light onto
the 1/4" screw on top of
the suction mount.
Use the ring to secure
the light.
When not in use, cover
the suction cup with
plastic film, to prevent it
from getting dirty.
If needed, the suction
cup can be cleaned with
water.
How to adjust the direction
How to install the suction cup
Turn the knobs on
the suction cup to
adjust the angle of
the light.
Gently pull at the
tip of the suction
cup.
Remove the
suction cup from
the surface.
Open the lock on
the suction cup.
Tighten the knobs
to prevent the light
from moving
during use.
The suction cup works
best on flat and
smooth surfaces.
  • Page 1 1

MOJOGEAR MG-33 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI