2. Hoover
  3. FH68020V

Hoover FH68020V User guide

  • Hello! I have reviewed the provided user guide for the Hoover Power Scrub XL Carpet & Upholstery Cleaner. This document covers everything from initial setup, including attaching the handle, to detailed cleaning instructions. I'm ready to answer your questions about how to properly operate and maintain your device, including various cleaning modes and steps, such as washing, drying, and cleaning the unit's brushes and nozzles.
  • How to attach the handle?
    How to fill the tank?
    How to wash and dry carpet?
QUICK START GUIDE
Fill Tank with Water up to MAX line located on side of the tank. Follow
steps on solution bottle to add the appropriate amount of solution to
tank.
Attach Handle.
CLICKCLICK
CLICKCLICK
GETTING STARTED
HOW TO USE: MAIN UNIT
SQUEEZE TRIGGER
WASH
RELEASE TRIGGER
DRY
Slowly Push forward and squeeze trigger to wash. Release Trigger and
slowly pull unit back to Dry carpet. Repeat and move to new section.
Recline
On/Off
Use pedals to operate.
1
12
2
POWER
SCRUB
TM
XL
CARPET & UPHOLSTERY
CLEANER
For Frequently Asked Questions and to Register
your new product, scan here!
3
2
1
Spray / Scrub.Tool Attachment. Hose Attachment.
HOW TO USE: ABOVE FLOOR
1
To Engage Quick Clean Mode, Turn Knob Counter-Clockwise until engaged.
Return to Deep Clean Mode by Turning knob Clockwise to Starting Position.
*Available for select models only.
HOW TO USE: QUICK CLEAN MODE*
Quick
Clean
Mode
Deep
Clean
Mode
961003499-R3
1234
Reinsert Brushes and
Press Firmly until
Latches Lock.
Pull to Remove Nozzle
Cover.
To Remove Brushes, press both
tabs on side of foot. To Reinsert
Brushes push them back in
place until you hear a click.
Remove Dirty Water
Tank.
HOW TO USE: CLEANING AND MAINTAINING
/