OttLite Cool Breeze Fan Lamp is a versatile lighting and cooling solution for your home or office. With three LED color modes (4000K, 5000K, 2700K), four brightness levels, and three fan speeds, this lamp can be customized to your specific needs. The USB port allows you to charge your devices while you work or relax. The flexible neck lets you direct the light and airflow exactly where you want it.
OttLite Cool Breeze Fan Lamp is a versatile lighting and cooling solution for your home or office. With three LED color modes (4000K, 5000K, 2700K), four brightness levels, and three fan speeds, this lamp can be customized to your specific needs. The USB port allows you to charge your devices while you work or relax. The flexible neck lets you direct the light and airflow exactly where you want it.
Cool Breeze Fan Lamp with USB Charging
CSF05WGZ-UK CSF051GZ-UK 383355 PL- 0147
CONGRATULATIONS!
You’ve purchased the finest in natural lighting technology with your new
OttLite® product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product Registration Form and return it today by
mail, or register online by going to: OttLite.com/warranty.
NOTE: THIS UNIT IS FULLY ASSEMBLED
1. Remove lamp from packing placing lamp body base (A) flat on a steady
surface.
2. Connect the AC Adapter input (B) into connector (C) in the bottom of the
lamp.
3.
Plug the AC adapter (D) into a standard household 230V AC outlet. Note: Only
use with the supplied AC adapter to avoid damage or fire.
4. This lamp provides three LED colour modes, four levels of brightness and
three levels for fan speed.
5. To power LED lighting, slightly touch switch (E) to achieve the following:
• To turn lamp “ON” to 1st brightness setting; touch the switch “once”;
• for 2nd brightness setting; touch the switch “two-times”;
• for 3rd brightness setting; touch the switch “three-times”;
• for 4th brightness setting; touch the switch “four-times”.
• to turn lamp “OFF”; touch the switch “five-times”.
6. To adjust lighting colour mode: touch “M” key (F) to switch light colour
temperature mode; 4000°K, 5000°K, 2700°K. NOTE: 2700°K is the default
colour mode.
7. To power fan, slightly touch fan switch (G) to turn “ON” and achieve the
following:
• for 1st fan speed setting; touch the switch “once”;
• for 2nd fan speed setting, touch the switch “twice”;
• for 3rd fan speed setting, touch switch “three-times”;
• to turn fan “OFF”; touch the switch “four” times.
NOTE: The brightness of the fan status indicator light (H) will vary with the
current wind speed. The fan status indicator light is located on the inner
fan housing (J).
8. To position shade (K) simply bend flex-neck (L) as needed to point the
light. Please hold the lamp base (A) while adjusting the lamp. Take care not
to overextend the lamp to avoid unbalancing it and damage. Please refer to
diagram 1 for lamp maximum adjustment range.
SAFETY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS
1. Turn lamp off and WAIT UNTIL LAMP HEAD (K) AND ADAPTER (D) ARE
COOL before handling.
2. LED light panel (M) might get hot after several hours of continuous use, DO
NOT place your hands directly on LED light panel.
3. Never use with an extension cord unless the plug can be fully inserted into
the receptacles in the extension cord.
4. Do not alter the plug.
5. The lamp head included with this unit cannot be replaced by the consumer.
6. INDOOR USE ONLY.
NOTE: The important safety instructions appearing in this instruction sheet
are not meant to cover all possible conditions and situations that may occur. It
must be understood that common sense, caution, and care must be used with
any electrical product.
CAUTION NOTES:
1. THIS PRODUCT IS FOR INDOOR USE ONLY.
2. DO NOT USE IN THE PRESENCE OF FUMES IN THE ENVIRONMENT.
3. DO NOT USE IN RAIN OR NEAR SOURCES OF MOISTURE.
4. KEEP AWAY FROM OPEN FLAMES AND HEAT SOURCES.
5. DO NOT COVER THE FAN INLET OR THE FAN OUTLET.
6. SLIGHT NOISE IS NORMAL WHEN FAN IS RUNNING.
7. PERIODICALLY REMOVE AND CLEAN FILTER (N). TO REMOVE
FILTER (N), FIRST UNPLUG LAMP. THEN USE A SCREWDRIVER
TO REMOVE SCREW (P), OPEN VENT COVER (Q), AND REMOVE
FILTER (N). INSTALLATION IS THE REVERSE OF REMOVAL.
NOTE: ENSURE FILTER IS COMPLETELY DRY BEFORE
INSTALLATION AND USE.
CAUTION! IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE
IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR ITS
SERVICE AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.
INDOOR USE ONLY.
CAUTION! THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE;
WHENTHE LIGHT SOURCE REACHES ITS END OF LIFE THE WHOLE LUMINAIRE SHALL
BE REPLACED.
CAUTION: Any change or modification to product not expressly recognized
by OttLite Technologies voids OttLite’s responsibility for proper function of
product.
AC/DC ADAPTER
Input: AC 100-240V, 50/60 Hz, 0.6A
Output: 13V DC, 1.5A with a Male DC Plug
THIS LAMP CONTAINS a 5V, 2,1A USB output port (R) located on the bottom
rear of lamp. USB port can charge items such as tablets, cellular phones, etc.
ENGLISH Cool Breeze Fan Lamp with USB Charging
INS220677 REV021522
J
G
H
L
Diagram 1
K
A
M
B
C
D
E
F
Q
P
N
R
This symbol on the product or on its packaging indicates
that this product (including batteries) shall not be treated
as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste.
Disposal of Old Electrical & Electronic Equipment
For more detailed information about recycling of this product, please
contact your local Council, your household waste disposal service or the
shop or source where you purchased the product.
DECLARATION OF CONFORMITY
PRODUCT: PL-0147 Cool Breeze Fan Lamp with USB Charging
MANUFACTURER: OttLite Technologies, Inc.
1715 N. Westshore Blvd. Suite 950, Tampa, FL 33607. USA
Declares CE marking in accordance with the following EU directives
and normative standards.
STANDARDS:
EN 60958-1:2015 Luminaires --
+A1:2018 Part 1: General requirements and tests
EN 60598-2-4:2018 General Purpose Luminaire;
Portable Requirements
EN 62031:2008 LED modules for general lighting
+A1:2013+A2:2015 safety specifications
EN 62493:2015 Assessment of lighting equipment related to
human exposure to electromagnetic fields
61347-1: 2015 General and safety requirements for lamp
controlgear for use on D.C. supplies
EN 61347-2-11: 2001
General and safety requirements for miscellaneous
electronic circuits used with luminaires
EN 62471: 2008 Photobiological safety of lamps and lamp systems
EN 55015:2013 EMC for Luminaries
EN 61547:2009 EMC Immunity
EN 61000-3-2:2014 Current Harmonics
EN 61000-3-3:2013 Voltage Fluctuations
DIRECTIVES:
Low Voltage Directive
2014/35/EU
EMC Directive
2014/30/EU
Tampa, May 2021 | K. Albinus | Quality Assurance
-
1
-
2
OttLite Cool Breeze Fan Lamp is a versatile lighting and cooling solution for your home or office. With three LED color modes (4000K, 5000K, 2700K), four brightness levels, and three fan speeds, this lamp can be customized to your specific needs. The USB port allows you to charge your devices while you work or relax. The flexible neck lets you direct the light and airflow exactly where you want it.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
OttLite CS7QI00Z-UK User manual
-
-
-
-
-
-
-
-
-