Jabra Eclipse Operating instructions

Jabra Eclipse

How do I pair my Jabra Eclipse with my mobile device using

NFC?

To pair your Jabra Eclipse with your smartphone, tablet, or other mobile

device using NFC, follow these steps.

1. Turn on NFC on your mobile device.

2. Place your Jabra Eclipse in the charging case, and make sure it is

charged.

3. To pair, locate the NFC zone on your Jabra Eclipse and place it against

the NFC zone on your mobile device.

Enter “0000” (four zeros) if you are asked for a PIN. Your mobile device

may prompt you to accept the pairing

07/08/2022 20:42

https://www.jabra.com.au/supportpages/jabra-eclipse/100-98200001-40/faq/eddb45fa-

a672-4baa-b785-da2143818a44

Page 1 of 2

Note

If pairing is not successful, try the pairing steps again, or try pairing with a

different Bluetooth device. For troubleshooting tips, see here.

Optionally, try using the Bluetooth Pairing Guide which provides detailed

steps for pairing with a mobile device.

07/08/2022 20:42

https://www.jabra.com.au/supportpages/jabra-eclipse/100-98200001-40/faq/eddb45fa-

a672-4baa-b785-da2143818a44

Page 2 of 2