2. MULTISPAN
  3. MS-5716_RU_1812

MULTISPAN MS-5716_RU_1812 Owner's manual

  • Hello! I've reviewed the product manual for the MULTISPAN MS-5716 RU 16 Channel Scanner. This manual details the operation, configuration and safety precautions for the device. It covers everything from wiring to setting alarms and data logging using the built-in USB port. I'm ready to answer questions you might have about setting up, configuring or maintaining the MS-5716 RU.
  • What input types does this device support?
    What is the relay output capacity?
    How to add offset and correction factor?
    How many values can be stored in the internal memory?
ProductManual
MultispanControlInstrumentsPvtLtd
72/B,Phase1,GIDCEstate,Vatva,Ahmedabad-382445,Gujarat,India.
+91-79-40029250 +91-9978991471
MS-5716RU
16ChannelScanner
withUSBPort
www.multispanindia.com
[email protected]
www.multispanindia.com
MS-5716RU
Page-1
www.multispanindia.com
ProductInception
Memory Full
Indication
Data Transfer
Indication
Parameter Lock Key Auto / Manual Channel
Scrolling Key
High / Trip Alarm
Indication LED
Scroll / Hold
Channel
Indication
Model Number
Parameter Lock
Indication
Low / High Alarm
Indication LED
Enter Key
Right Shift Key
USB Port
Down Key
Left Shift Key
SET Key
UP Key
Communication Key
*
*
*
*
*
*
**
*
*
*
*
*
*
*
*
*
MS-5716RU
www.multispanindia.com
Page-2
TechnicalSpecification
UPPER:4Digit7seg0.70”, LEDDisplayRED
LOWER:4Digit7seg0.50”, LEDDisplayGREEN
Output
PowerSupply
Operating
Temperature
Relative
Humidity
100to250VAC,50/60Hz,Approx10VA
-999To9999
}
Analoginput Range
0-10VDC
0-20mADC
4-20mADC
PT-100/3W-99to400℃
PT.1/3W-99.0to400.0℃
Thermocouple RTD
0To55℃
Upto95%RHNonCondensing
Model
Display
Size(mm)
PanelCutout
Inputsand
Range
192(H)X96(W)X140(D)mm
188X92mm
MS-5716RU
J0to600℃
K0to1200℃
8Relay,(NO-C)1C/O5A@230VAC,USBDataLoggerFacility

Note:-1C/O5A@230VACforresistiveload.
1)Doallconnectionsasperthewiringdiagram.
ToConfigure:1.InputSelection(J,K,PT-100,PT.1,0-10VDC,0-20mADC&4-20mADC).
2.Relaymode
-High/Low,High&Low,1relaypergroup.
-HighandLow,High&Trip2relaypergroup.
3.Setpointselection.
4.Analograngeselection.
5.OffsetandCorrectionfactorselection.
6.Communicationsparameter.
2)Toaddoffset&correctionfactor,press+keystogether.
Setoffsetforeachchannelifrequired.
Offsetrangewillbe±25℃forJ,K,PT-100temperatureinput.
Offsetrangewillbe±25.0℃forPT.1temperatureinput.
Offsetrangewillbe-999to999foranaloginput.
Correctionfactorrangewillbe-999to999onlyforanaloginput.
Procedure
4)Presskeyforcontinuousscrollingormanualscrolling.
5)InHoldmodeuse&keytoselectnextchannel.
6)Ifkeyispressedthen,userwillonlybeabletoviewalltheparametersvalues,butwould
notbeabletochangeanyoftheparameters.
MS-5716RU
www.multispanindia.com
Page-3
(Repeatthesameprocedureforall16channels).
Scantime.
Press+key.
Presskey.
Presskey.
Presskey.
Presskey.
Presskey.
UseorkeytoSkiporUnskipChannel.
SET
05
J-TY
UNS
SCN
CH 1
CH 1
J-TY
Ch16
1
S 1P
S 1P
/
/
TochangetheInputType,PressorKey.
(J,K,PT-100,PT.1,0-10VDC,0-20mADC&4-20mADC).
(Repeatthesameprocedureforall16channels).
h
UNS
Ch16
1
h
h
h
Presskeytosave&exit.
ENT
InputSelection
MENU-1
Note:-Valuescanbechanged
bypressingorkeys.
MS-5716RU
www.multispanindia.com
Page-4
MENU-2
MENU-3
Presskeytosave&exit.
Presskeytogotonextparameter.
Presskeytoselectrelayoutput.
Presskeytonextgroup(ifrelayexist).
Press+key.
SETSET
SET
SET
SET
Setyesornoforchannelbypressingorkey.
Setrelayoutput.

Setrelayoutput.

Ifselect1relay. Ifselect2relay.
Low


High



HighandLow.

Lowandhigh.


HighandTrip.


bypressorkey.

bypressorkey.
rp1
g
OUT
RLY1 RLY2
01YS 01nO
1 RLY
1 LOW 2 HNT
L O
H I
H n L
L n H
H n T
/
Presskey.
SETSET
Presskey.
SETSET
Presskey.
SETSET
Presskey.
SETSET
Presskey.
SETSET
Presskey.
SETSET
Presskey.
SETSET
Presskeytosave&exit.
Low/Highsetpoint-1valuescanbechangebypressing
orkey.
Low/HighsetpointforGroup8,
High/TripsetpointforGroup1,
valuecanbechangedbypressingorkey.
High/TripsetpointforGroup8,
Hysteresis-1valuescanbechangedbypresssingorkey.
300
100
300
5
5
H5-1
L5-8
H5-8
Hy1
Hy8
(Repeatthesameprocedureforall16group).
(Repeatthesameprocedureforall8Hysteresis)
100
L5-1
RelayMode
SetpointSelection
Note:-Valuescanbechanged
bypressingorkeys.
MS-5716RU
www.multispanindia.com
Page-5
DP
ANLg
Lr-1
Lr16
Hr01
Hr16
00.00
SET
00.00
00.00
00.00
00.00
Press+key.
SET
Presskeytosave&exit.
DP(DecimalPoint)isCommonforallchannels.
Positioncanbechangedbypressingorkeys.
ENT
MENU-4
NOTE:
(Repeatthesameprocedureforall16channels).
(Repeatthesameprocedureforall16channels).
DecimalPoint.
Analog
set
Lowrangechannel1.
Highrangechannel1.
Presskey.
Presskey.
Presskey.
Presskey.
Presskey.
Presskey.
AnalogRangeselection
Note:-Valuescanbechanged
bypressingorkeys.
MS-5716RU
www.multispanindia.com
Page-6
(Repeatthesameprocedureforall16channels).
(Repeatthesameprocedureforall16channels).
Press+keytochangeoffset.
Offsetforchannel1.
Correctionfactorforchannel1.
Offset
DisplayShowsCorrectionfactorparametersetting.
Presskey.
Presskey.
Presskey.
Presskey.
Presskey.
Of 1
Of16
Ofst
CRFC
Cf01
Cf16
00.00
00.00
SET
SET
00.00
00.00
MENU-5
OffsetandCorrectionfactorselection
Presskeytosave&exit.
ENT
Note:-Valuescanbechanged
bypressingorkeys.
MS-5716RU
www.multispanindia.com
Page-7
MENU-6
CommunicationParameter
010
UbtM
USBSaveTime.
1-999.
00
PASS
Presskey.
SET
PresskeytoaccessModbusParameter.
COMM
Ifpasswordis
25.
Ifpassword
isnot25.
10
SEC
10
MIN
10
10
10
2018
HOUR
Date
MONT
YEAR
Presskey.
SET
Presskey.
SET
Presskey.
SET
Presskey.
SET
Presskey.
SET
Presskey.
Presskey.
SET
SET
Presskeytosave&exit.
ENT
(1-12)
Month.

(0-99)
Year.

(1-31)
Date.

(0-23)
Hour.

(0-59)
Minute.

(0-59)
Second.
Note:-Valuescanbechanged
bypressingorkeys.
MS-5716RU
www.multispanindia.com
Page-8
TerminalDiagram
MS-5716RU
C

I

D

J

E

K

F

L

12
11
10
1 2 3456 7 8 9
24
13 14 15 16 17 18 19 20 21 22 23
A

G

B

H

NO
NO
NO
NO
NO
NO
Relay-1
Relay-4
Relay-2
Relay-5
Relay-3
Relay-6
C
C
C
C
C
C
O

U

P

V

Q

W

R

X

35 36
37 38 39 40 41 42 43 44 45 46 47 48
25 26 27 28 29 30 31 32 33 34
M

S

N

T

NO NO
Relay-7 Relay-8
C C
LN
~
50/60 Hz
10VA
100
250V AC !
- - - -
+ + + ++ + + +
T/C T/C T/C T/C
PT-100
3W
PT-100
3W
PT-100
3W
PT-100
3W
0-10V
DC

0-10V
DC

0-10V
DC

0-10V
DC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

CH-1 CH-2 CH-3 CH-4
- - - -
+ + + ++ + +
T/C T/C T/C T/C
PT-100
3W
PT-100
3W
PT-100
3W
PT-100
3W
0-10V
DC

0-10V
DC

0-10V
DC

0-10V
DC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

CH-5 CH-6 CH-7 CH-8
- - - -
+ + + ++ + + +
T/C T/C T/C T/C
PT-100
3W
PT-100
3W
PT-100
3W
PT-100
3W
0-10V
DC

0-10V
DC

0-10V
DC

0-10V
DC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

CH-9 CH-10 CH-11 CH-12
- - - -
+ + + ++ + +
T/C T/C T/C T/C
PT-100
3W
PT-100
3W
PT-100
3W
PT-100
3W
0-10V
DC

0-10V
DC

0-10V
DC

0-10V
DC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

0/4-20
mADC

CH-13 CH-14 CH-15 CH-16
+
+
www.multispanindia.com
Made in India
www.multispanindia.com
MS-5716RU
Page-9
1/06/2018 45 42 39 35 35
46 42 39 36 36
46 42 39 36 36
46 43 39 36
46 43 40 36
46 43 40 37
46 43 40 37
46 43 40 37
46 43 40 37 37
37
37
37
37
37
37
34
34
34
34
34
34
34
34
33
33
46 43 39 36
14:22:31
14:22:32
14:22:33
14:22:34
14:22:35
14:22:36
14:22:37
14:22:38
14:22:39
14:22:40
1/06/2018
1/06/2018
1/06/2018
1/06/2018
1/06/2018
1/06/2018
1/06/2018
1/06/2018
1/06/2018
Date Time Channel 1 Channel 2 Channel 3 Channel 4 Channel 15 Channel 16
Note:-Upto4000Valuescanbestoredininternalmemory,andafterinternalmemoryreachesto3000valuesMemoryfull
indicationLEDstartblinkingwhichmeansmemoryisabouttofull.
Note:-ConfigurethePendriveinFAT32filesystem,beforeusing.
USBExcelSheetFormat
www.multispanindia.com
Page-10
3)Cableusedforconnectiontopowersource,musthaveacrosssectionof1mmorgreater.Thesewires
shouldhaveinsulationscapacitymadeofatleast1.5kV.
2)Toreduceelectromagneticinterference,usewirewithadequateratingandtwistsofthesameof
equalsizeshallbemadewithshortestconnection.
4)Whenextendingthethermocoupleleadwires,alwaysusethermocouplecompensationwiresforwiring
fortheRTDtype,useawiringmaterialwithasmallleadresistance(5Ωmaxperline)andnoresistance
differentialsamongthreewiresshouldbepresent.
1)TopreventtheriskofelectricshockpowersupplytotheequipmentmustbekeptOFFwhiledoingthe
wiringarrangement.Donottouchtheterminalswhilepowerisbeingsupplied.
5)Abetteranti-noiseeffectcanbeexpectedbyusingstandardpowersupplycablefor
theinstrument.
WarningGuidelines
2
1)Thisequipment,beingbuilt-in-type,normallybecomesapartofmaincontrolpanelandinsuchcasethe
terminalsdonotremainaccessibletotheenduserafterinstallationandinternalwiring.
2)Donotallowpiecesofmetal,wireclippings,orfinemetallicfillingsfrominstallationtoentertheproduct
orelseitmayleadtoasafetyhazardthatmayinturnendangerlifeorcauseelectricalshocktotheoperator.
3)Circuitbreakerormainsswitchmustbeinstalledbetweenpowersourceandsupplyterminalto
facilitatepowerʻONʼorʻOFFʼfunction.Howeverthismainsswitchorcircuitbreakermustbe
installedatconvenientplacenormallyaccessibletotheoperator.
4)Useandstoretheinstrumentwithinthespecifiedambienttemperatureandhumidityrangesas
mentionedinthismanual.
InstallationGuidelines
MechanicalInstallation
1)Preparethepanelcutoutwithproperdimensionsasshowabove.
2)Fittheunitintothepanelwiththehelpofclampgiven.
3)Theequipmentinitsinstalledstatemustnotcomeincloseproximitytoanyheatingsource,
causticvapors,oilssteam,orotherunwantedprocessbyproducts.
4)Usethespecifiedsizeofcrimpterminal(M3.5screws)towiretheterminalblock.Tighteningthe
screwsontheterminalblockusingthetighteningtorqueoftherangeof1.2N.m.
5)Donotconnectanythingtounusedterminals.

Maintenance
1)Theequipmentshouldbecleanedregularlytoavoidblockageofventilatingparts.
2)Cleantheequipmentwithacleansoftcloth.Donotuseisopropylalcoholorany
othercleaningagent.
3)Fusibleresistormustnotbereplacedbyoperator.
SafetyPrecautions
Allsafetyrelatedcodifications,symbolsandinstructionsthatappearinthisoperatingmanual
orontheequipmentmustbestrictlyfollowedtoensurethesafetyoftheoperatingpersonnel
aswellastheinstrument.
Ifalltheequipmentisnothandledinamannerspecifiedbythemanufacturer,itmightimpairthe
protectionprovidedbytheequipment.
=>Readcompleteinstructionspriortoinstallationandoperationoftheunit.
WARNING:Riskofelectricshock.
MS-5716RU
www.multispanindia.com
Page-11
MODEL A
192mm 140mm 157mm 97mm 10mm 130mm 27mm 187mm 89mm
BC
D E
F
DIMENSIONS
G H I
C
I
D
TOP VIEW
F
H
G
E
E
A
D
B
MechanicalDimensions
RIGHT SIDE VIEWFRONT VIEW
MS-5716RU
Productimprovementandupgradeisaconstantprocedure.Soformoreupdatedoperatinginformationandsupport,
PleasecontactourHelpline:+91-9978991474/76/82orEmailat [email protected]
/