To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.gpx.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección
de apoyo en: www.gpx.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur: www.gpx.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.gpx.com
Copyright © 2020 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective
owners. Specications are subject to change without notice.
International Support
Protect for Today
Sustain for Tomorrow
Made
Green
Clock
To Set the Clock Manually
1. With the radio o, press and hold the Time Set button until the display begins ashing.
2. Press the Hour/Min buttons to adjust the time. Note the PM indicator.
3. Press the Time Set button again to nish.
Alarm and Sleep Timer
Setting the Alarm
1. With the radio o, press and hold the Alarm Set button to set the time for Alarm 1 or/
and Alarm 2.
2. The display will ash and show the time the Alarm 1 is set to go o. Press the Hour/Min
buttons to adjust the time. Note the PM indicator.
3. Once you have set your desired time, press the Alarm Set button to conrm.
4. After the alarm time is set, select the alarm type (Buzzer or Radio) by pressing the Hour/
Min buttons.
5. Press Alarm Set to conrm.
6. Then the display will ash and show the time Alarm 2 is set to go o. Press the Hour/
Min buttons to adjust the time. Note the PM indicator.
7. Once you have set your desired time, press the Alarm Set button to set.
8. After the alarm time is set, select the alarm type (Buzzer or Radio) by press the Hour/
Min buttons.
9. Press Alarm Set to conrm.
FM Radio
The clock radio is equipped with an FM wire. To improve radio reception, adjust the FM wire of
the clock radio.
Tuning the Radio
1. Press the Power button to power the clock radio ON, then press again to select FM
Mode.
2. Press the Tuning +/− buttons to adjust the radio to the desired frequency.
3. Press and hold the Tuning +/− buttons to scan for available frequencies.
4. Press the Volume +/− buttons to adjust the volume.
5. Press the Power to turn the radio o.
Voice Assistant
When your mobile phone is connected to the clock via Bluetooth, you can use voice assistant.
1. Pair your phone to the clock (see Bluetooth section above). Note: If using an
iPhone, access your Bluetooth settings menu, select CB360 and turn on
"Show Notications" this is the only way to synch your iPhone's time to
the clock.
2. The clock's time will automatically update to the time on the connected phone and the
voice assistant may be used.
Disabling the Alarm
• Press the Alarm Set button until the alarm indicator is no longer lit.
Snooze and Alarm Reset
After the alarm sounds:
• Press the Snooze/Sleep button to delay the alarm for 9 minutes.
• Press the Power button to turn the alarm o until the set alarm time is reached again.
Setting the Sleep Timer
1. Press the Sleep button repeatedly to set the sleep timer. Timer duration is displayed in
minutes.
2. Once the set sleep time has expired the alarm will sound, then the unit automatically
power o.
Saving Radio Presets
1. Tune to the desired FM frequency (see above steps).
2. Press and hold the Preset button. The display will begin ashing a preset. Ex: "P01".
3. Press the Tuning +/− buttons to select the preset to be saved. (P01 to P10).
4. Press the Preset button to save that preset.
5. With the radio ON, press the Preset buttons to cycle through radio presets to cycle
through radio presets.
Power, Battery Backup, and Charging
To power the unit, plug the AC/DC power adapter (included) into the DC power port on
the rear of the unit and a standard AC power outlet.
Battery backup is used to save the time on the clock, in the event of a power failure.
Requires 2 AA batteries (not included).
Charge a phone or mobile device using a USB charging cable (not included) and connect it to
the USB charging port on the rear of the unit. Note: this USB charging port is not suitable for
charging tablets. Power output: 5V 1A only.
Bluetooth Wireless
Pairing to a Bluetooth Device and Playing Audio
1. When powered on, the clock will automatically enter into Bluetooth mode.
The symbol on the display will begin ashing and a voice prompt will
sound from the speaker. When pairing, remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, select CB360 from your
Bluetooth settings to pair. When successfully paired, the symbol on the
display will turn solid and a voice prompt will sound. You can refer to the
user’s manual for your specic device for instructions on pairing and connecting
Bluetooth devices.
3. Audio played through the connected Bluetooth device should now be heard
through the speakers. Use the controls on the connected Bluetooth device to
select and begin playing audio. Play, pause or skip audio using the controls
on the connected device.
4. After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device. Note: If your device should
become unpaired or you nd it is unable to connect, press & hold the
Play/Pause/Pair button to enter into Pairing Mode. A voice will announce
“Bluetooth is connecting” and you can connect to the speaker manually.
5. Note: The clock time will automatically be updated to match your
phone's time when connected. If using an iPhone, access your Bluetooth
settings menu, select CB360 and turn on "Show Notications" to synch
your phone's time to the clock.