QI Automotive 88405001 Installation guide

Brand
QI Automotive
Model
88405001
Category
Car kits
Type
Installation guide

QI Automotive 88405001 is a wireless charging module that allows you to charge your iPhone in your car. It's compatible with iPhones made after 2018 and is designed to replace the old wireless charging module in your vehicle. The module is easy to install and works by displaying a lightning icon on your car's screen when it's charging. It complies with FCC regulations and should be installed at least 20cm away from your body to maintain compliance.

QI Automotive 88405001 is a wireless charging module that allows you to charge your iPhone in your car. It's compatible with iPhones made after 2018 and is designed to replace the old wireless charging module in your vehicle. The module is easy to install and works by displaying a lightning icon on your car's screen when it's charging. It complies with FCC regulations and should be installed at least 20cm away from your body to maintain compliance.

WIRELESS CHARGING
PRODUCT INTRODUCTION
Due to the latest iPhone wireless charging system upgrade, the old wireless charging module
cannot charge the iPhone before 2018. Therefore, the old one needs to be replaced with the
latest wireless charging module to make it adapt to the latest iPhone.Our wireless charging
module is fully developed according to the original structure and performance, which ensures
the stability and safety of users when charging, and allows you to upgrade your car with the
latest wireless charging function at a cheap price.
HOW TO INSTALL
01 Remove the old wireless charging module (Different cars have different positions).
02 Unplug the old harness module.
03 Connect the harness to the adapter harness of the new module.
04 Connect the adapter harness plug with the new module.
05 Install the new module to the vehicle.
HOW TO WORK
When the new module is working, it still display a“ lightning icon” on the screen
(Different cars have different positions).
FCC REQUIREMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed
and operated with minimum 20cm distance between the radiator and your body: Use only the
supplied antenna.
  • Page 1 1
  • Page 2 2
  • Page 3 3

QI Automotive 88405001 Installation guide

Brand
QI Automotive
Model
88405001
Category
Car kits
Type
Installation guide

QI Automotive 88405001 is a wireless charging module that allows you to charge your iPhone in your car. It's compatible with iPhones made after 2018 and is designed to replace the old wireless charging module in your vehicle. The module is easy to install and works by displaying a lightning icon on your car's screen when it's charging. It complies with FCC regulations and should be installed at least 20cm away from your body to maintain compliance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents