CRK646 Mounting Kit
Chrysler
2004-08 PACIFIC
VEHICLE APPLICATIONS
©2016 AMERICAN INTERNATIONAL INDUSTRIES, INC.
TECH Ver. 08/16 PRINT Ver.09/04
1.
Using a metric Allen Wrench, remove the shifter knob. The screw is located at the front
of the shift lever near the bottom.
2. Carefully lift upward on the trim from around the shift lever and remove.
3. Carefully unclip and remove the left and right trims from both sides of the radio
and climate controls.
4. Remove the (4) Phillips screws securing the factory radio to the sub-dash.
5. Pull radio forward, disconnect the wire harness and antenna lead and remove radio.
DASH DISASSEMBLY
2004-05 CHRYSLER PACIFIC
DOUBLE DIN MOUNT ASSEMBLY INSTRUCTIONS
1.
Insert DIN sleeve from your new radio into the radio opening of the installation kit.
2. Depress the tabs from inside the sleeves opening upward, outward, and downward to secure
the installation kit to the sub-dash.
Fig A
IMB646 LEFT
IMB646 RIGHT
INSERT ISO MOUNTING
BRACKETS INTO RADIO
OPENING, AS SHOWN IN
ILLUSTRATION, AND ATTACH
RADIO TO BRACKETS USING
SCREWS SUPPLIED WITH RADIO
OR KIT. ONLY WHEN ISO
MOUNTING RADIO.
www.aampglobal.com www.aius.net
2500 East Francis Street Ontario, CA 91761, U.S.A.
Sales: (800) 477-2267
Intl: (727) 572-9255
Support: 888-228-5560
-
1
PAC CRK646 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Scosche FCJ1276AB Installation guide
-
Metra Electronics 99-6510 User manual
-
Metra 996510 User manual
-
-
-
Metra Electronics 99-5807 User manual
-
-
Metra 95-3302 Specification
-
Metra Electronics 95-3302 User manual
-
Mercury 99-5815 User manual
