US Stove 40314 Installation guide

Type
Installation guide
40314
SHAKER GRATE
United States Stove Company
227 Industrial Park Rd. • South Pittsburg, TN 37380 853550
ITEM USED ON DESCRIPTION
40314
1600 series furnaces
1800 series furnaces
Cast iron Construction
For use with Wood & Coal
WARNING:
Allow the stove to cool before carrying out any maintenance or cleaning.
STEP 1
Open the ash door and remove the ashpan. After
removing the ashpan, remove the nut and bolt that
attaches the shaker grate assembly to the shaker
pivot weldment.
SHAKER GRATE REMOVAL
Shaker Grate
Grate Frame
Connecting Bar
STEP 3
Once removed, place the shaker grate assembly onto a suitable surface that will not be damaged. Remove the
nuts and bolts that secure the shaker grates to the connecting bar. Note: Then nuts and bolts are located on the
bottom of the shaker grate assembly. Once the nuts and bolts have been removed, the shaker grates will easily
lift out the grate frame.
STEP 2
Open the feed door to remove the shaker grate assembly. When removing the assembly lift the back end of the
assembly up rst. This will allow the handle of the connecting bar to be removed from the ash door
  • Page 1 1
  • Page 2 2

US Stove 40314 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI