Operator’s Manual
EaziClean
®
, Premium™ and CanMaster™ Can Openers
©
2017 The Vollrath Company L.L.C. Part No. 2350084-1 ml 4/26/17
Please register your product at Vollrath.com/ProductRegister
Thank you for purchasing this Vollrath equipment. Before operating the
equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. Save the original box and packaging. Use this packaging
to ship the equipment if repairs are needed.
Safety Precautions
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
Warning is used to indicate the presence of a hazard that will or can
cause severe personal injury or death.
Caution is used to indicate the presence of a hazard that will or can
cause minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not
hazard-related.
To reduce risk of injury or damage to the equipment:
• Check the can opener before each use to insure it is clean.
• Check the blade to ensure that it is securely fastened and in good
condition. Replace nicked or worm blades immediately.
FUNCTION AND PURPOSE
The can openers are designed to easily pierce and safely open cans.
They are not intended for household or laboratory use.
WARNING
CAUTION
Item No. Model
Bar Length
IN (CM)
Gear
Size
Material
Construction
BCO-2000
EaziClean
®
16 (40.6)
1 (2.5)
Medium-duty,
zammac alloy
BCO-3000 25 (63.5)
BCO-5000 16 (40.6)
1¹⁄₂ (3.8)
Heavy-duty,
stainless steel
BCO-6000 25 (63.5)
BCO-7000 25 (63.5) 1¹⁄₂ (3.8)
Titan, stainless
steel
BCO-1 Premium™ 16 (40.6) 1 (2.5)
Medium-duty,
aluminum alloy
BCO-4 CanMaster™ 16 (40.6) 1¹⁄₂ (3.8)
Medium-duty,
aluminum alloy
BCO-2000
BCO-3000
BCO-5000
BCO-6000
BCO-7000
BCO-4
BCO-1
2 EaziClean
®
, Premium™ and CanMaster™ Can Openers Operator’s Manual
BEFORE INSTALLATION
Prior to first use, wash all the components with warm, soapy water.
Rinse thoroughly.
INSTALL THE BASE
Fixed Location
Tools You Will Need
• Flathead screwdriver
1. Choose a convenient location with a firm work surface.
2. Mount the platform base using the included hardware as shown
below.
NOTICE: If you are using a thin-gauge work surface, Vollrath
suggests placing a spacer plate underneath. This will
prevent the work surface from flexing, which may cause
the can contents to spill when opening.
Variable Location
1. If the can opener is not permanently mounted to a countertop, install
the clamp attachment to the platform base.
2. Tighten the clamp to secure the platform base to the countertop.
OPERATION
1. Place the bar into the base.
2. Lift the handle to the UP position. Place the can against the bar.
Using a swift downward movement, punch the blade into the can lid.
3. Lower the handle 90° to the DOWN position to engage the gear
drive.
EaziClean
®
, Premium™ and CanMaster™ Can Openers Operator’s Manual 3
4. Rotate the handle in a clockwise direction to open the can.
5. Raise the handle to the UP position to disengage the gear drive.
6. Lift up on the handle to raise the bar sufficiently to release the blade
from the can. Move the can away from the bar, taking care not to
spill the contents.
CLEANING
NOTICE: Food acids can cause the blade to become dull and corrode
the metal. Immediately clean the unit after every use.
NOTICE: Hand wash only.
1. Using HOT water and a bristle brush, thoroughly rinse off or spray
off the can opener.
2. Remove the blade cartridge.
3. Inspect the blade to ensure that it is in good condition.
4. If the blade has a nick, discard and replace with a new blade. Refer
to the instructions included with the replacement blade.
EaziClean Premium and CanMaster
Good blade Nicked blade
©
2017 The Vollrath Company L.L.C. Part No. 2350084-1 ml 4/26/17
www.vollrath.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201 U.S.A.
Main Tel: 800.624.2051 or 920.457.4851
Main Fax: 800.752.5620 or 920.459.6573
Customer Service: 800.628.0830
Canada Customer Service: 800.695.8560
Technical Services
Induction Products: 800.825.6036
Countertop Warming Products: 800.354.1970
All Other Products: 800.628.0832
TROUBLESHOOTING
SERVICE AND REPAIR
Serviceable parts are available on Vollrath.com.
To avoid serious injury or damage, never attempt to repair the unit or replace a damaged power cord yourself. Do not send units directly to
The Vollrath Company LLC. Please contact Vollrath Technical Services for instructions.
When contacting Vollrath Technical Services, please be ready with the item number, model number (if applicable), serial number, and proof of
purchase showing the date the unit was purchased.
WARRANTY STATEMENT FOR THE VOLLRATH CO. L.L.C.
This warranty does not apply to products purchased for personal, family or household use, and The Vollrath Company LLC does not offer a written
warranty to purchasers for such uses.
The Vollrath Company LLC warrants the products it manufactures or distributes against defects in materials and workmanship as specifically
described in our full warranty statement. In all cases, the warranty runs from the date of the end user’s original purchase date found on the receipt.
Any damages from improper use, abuse, modification or damage resulting from improper packaging during return shipment for warranty repair will
not be covered under warranty.
For complete warranty information, product registration and new product announcement, visit www.vollrath.com.
Problem Might be Caused By Course of Action
Can does not rotate. Ring gear is worn. Replace the ring gear.
Lids do not cut cleanly. Blade is damaged or worn. Replace the blade.
Blade cartridge does not fit into the
body (Premium/CanMaster only).
Black plastic sleeve has rotated after
cartridge was removed.
Rotate the sleeve until cartridge slides into the body.
Sleeve
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
