Dream Bikes GP-02 User manual

GP-02 Gopro Mount

Features:

Material: 7075

Installation Bolts entre to centre: 20mm

Installation:

- GP-02 is reversible, you can install it with Secure Bolt

on left or right side.

- GP-02 GoPro Mount have to be installed with

supplied M2.5 T8 torx bolts. Use mild-threadlock (as

Loctite 243) to avoid loosening. Tighten Installation

Bolts to 1.5Nm.

- Apply lithium grease on the thread of Secure Bolt,

mount GoPro or similar items and tight up to (E4 allen)

to 3 Nm max.

Installation Bolts

tighten to 1.5 Nm Max

apply mild-threadlock

Secure Bolt

grease thread

max 3 Nm