Kmart 43169863 User manual

I've reviewed the Assembly and User Instruction document for the Pedal Balance Roller model 43169863. This document provides a detailed parts list and step-by-step instructions for assembling the product, along with important safety warnings and usage guidelines. I am ready to answer your questions about this balance roller and its assembly.
Is adult assembly required?

Is it suitable for children under 3 years old?

What is the maximum weight this product can handle?

Is it safe to use on public roads?

Page 1 of 4

PEDAL BALANCE ROLLER

Assembly&user instruction

KEYCODE: 43169863

WARNING: DO NOT ASSEMBLE OR USE THIS PRODUCT WITHOUT READING THIS MANUAL. ADULT

ASSEMBLY IS REQUIRED. NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE. PROTECTIVE

EQUIPMENTS SHOULD BE WORN, ADULT SUPERVISION IS REQUIRED AT ALL TIMES WHEN

CHILDREN ARE USING THIS PRODUCT. CHECK THE PRODUCT IS IN GOOD WORKING ORDER BEFORE

EACH USE. REPLACE THE PRODUCT IF ANY BROKEN PARTS. DON’T USE IT ON PUBLIC ROAD.

MAXIMUM LOADING WEIGHT: 50kg. SUITABLE FOR CHILDREN 3-8 YEARS OLD.

Page 2 of 4

PARTS LIST

NOTICE: BEFORE THE ASSEMBLY, PLEASE CHECK IF ANY COMPONENT MISSING.

Part 1

Middle wheels

2pcs

Part 2

axles

4pcs

Part 3

Flat washer

8pcs

Part 4

nut

8pcs

Part 5

wrench

1pcs

Part 6

pedal

2pcs

Part 7

Side wheel

4 pcs

Part 8

Side wheel cover

4pcs

Part 9

screws

8pcs

Part 10

handle

2pcs

Part 11

Handle foam

2pcs

Part 12

bolt

4pcs

Page 3 of 4

Assembly instruction

Step 1, Insert part 2-axle into the hole of part 1 (Note: insert from the side with metal plate), Use

the wrench to secure the axle with part 3 and then part 4.

Step 2 And then the same for the opposite side hole, insert the axle to the hole (note: insert from

the side with metal plate) and secure it with part 3 and part 4.

Step 3, assemble the middle wheel and the two other axles as step 1 to step 2.

Step 4, insert the axles into the pedals, like the picture shows, make sure the pedals are level

Step 5, insert the axles into the side wheels, from the hole with metal plate, and secure them with

part 3 and then part 4.

Page 4 of 4

Correct assembling incorrect assembling

Step 6, secure the side wheel covers to the side wheel with part 9.

Step 7, put the foam on the handles, it will be much easier to lubricate the tube with some soapy

water

Step 8, secure the handles to the pedals with the bolt-part 12.

Assembling finished, before you start using this product, please make sure all screws are tight.

Protective equipment should be worn, adult supervision required at all times.

/

Other documents