2. Hanna Instruments
  3. HAA06-2005

Hanna Instruments HAA06-2005 Owner's manual

  • I've reviewed the datasheet for the HANNA instruments industrial pH and ORP electrodes, including models 1006, 1016, 1026, 2004, 2014, and 2024. It contains information about the different sensor types, electrical connections, and technical specifications. I'm ready to answer your questions about these electrodes, their features, and usage.
  • What is the body material of these electrodes?
    What is the maximum operating pressure?
    What type of reference cell is used in these electrodes?
    What sensor types are available for pH electrodes?
    What sensor types are available for ORP electrodes?
Industrial
pH and ORP electrodes
CODE:_______________________
CODIFICATION STRUCTURE
(*) Available with GP sensor type only
(**) Fluoride-resistant glass sensor (F-<2g/L, temperature<60°C, pH>2)
(***) Not for ORP electrodes
ELECTRODE CONSTRUCTION
pH electrodes
ORP electrodes with Platinum sensor
pH electrodes with HT type sensor
ORP electrodes with Gold sensor
TECHNICAL DATA
Body material: PVDF
Reference cell: Polymer filled
Matching Pin
Max. operating pressure: 6 bar (87 psi)
www.hannainst.com
ISTINDELR2 11/05
ELECTRICAL CONNECTION
pH and ORP electrodes with BNC connector
pH electrodes with BNC connector and Pt100 or Pt1000 temperature sensor
pH and ORP electrodes with BNC connector, amplified
Note: Remove the protection sleeve from the Matching Pin before use. Note: Remove the protection sleeve from the Matching Pin before use.
pH and ORP electrodes with direct wire connection
pH electrodes with direct wire connection and Pt100 or Pt1000 temperature sensor
pH electrodes with BNC connector and Pt100 sensor, amplified
/