•Fitting: Steel / Resin body with “alabaster” glass shade.
•Lamptype: Excluding 2 x E27 maximum 60W 230V
•Voltage: 220V - 240V ~ 50Hz
•Protectionagainstelectricshock: Class 1.Requires earthing.
•IPRating:20.Dust Protected. Protected against solid foreign objects of 12.5mm Ø and greater
Not protected against water.
• Commercial / domestic use
• Not suitable for outdoor use
• Not for use in areas exposed to moisture
•MaximumAmbienttemperaturerange: 20ºC - 40ºC
•Dimensions:
C57: (Ø)370mm x (D)130mm
C59: (Ø)370mm x (D)130mm
C61: (Ø)370mm x (D)130mm
•Spareglass:
C57: Code X234
C59: Code X237
C61: Code X234
•Beforeinstallationalwaysensurethepowersupplyisturnedoff.
•Thisluminaireisonlysuitableforxedmounting.
•Notforuseoutdoorsorinareasexposedtomoisture
•Insertmasonryplugsintothemountingsurface.Testtoensurethemountingsurfacewill
holdtheweightofthetting.
•Connectmainsupplyintoterminalblockmakingsureallconnectionsaretight.
•Fitceilingplateontomountingsurfacewithself-tappingscrews.
•Fitlamprmlyintolampholder.
•Makesureallconnectionsaretight.
•Fitglassshadeontoceilingplatebysecurelyplacingitintomountingclips.
•Reconnectpowersupply.
C57/C59/C61-attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion
ofinstallation,ensurethattheCerticateofComplianceisupdated.
•Beforeconnectingthisluminaire,ensurethatvoltageindicatedontheratinglabelcorresponds
with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafetyrequirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,I.E.Usingsiliconsealersorincorrectcabling,willinvalidate
your warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.Theluminaire
must not be used without the protection glass.
SPECIFICATIONS
IMPORTANTSAFEGUARDS
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Coastalareasensurethattheluminaireiscleanedfortnightly.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebeforeinstallation.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalrating.
•Ensurethatyoudonotplacetheluminairenearanycombustiblematerialsand/orsurfaces.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsof
this product whilst it is connected to the electricity supply.
•Itemmayvaryslightlyfromthepictureonthecarton.