Bitspower BPTA-O11DTE-V2-HI Installation guide

Type
Installation guide
C
Parts List
............1pcs
........1pcs
............1pcs
.....3pcs
...........1pcs
BPTA-O11DTE-V2
BPTA-NLSS360-F2PB
BPTA-CPUMS-SKI
BPTA-FX120PWM-DRGB
BPTASI-VG2080RD
Fittings
Accessory
......12 pcs
..............6 pcs
................1 pcs
................2 pcs
................2 pcs
................2 pcs
...............1 pcs
.............1 pcs
BPTA-DOTFH1622
BPTA-90RE
BPTA-F40
BPTA-F95
BPTA-F62
BPTA-F63
BPTA-EFW
BPTA-EXAIR
............1 pcs
.........1 pcs
..................1pcs
..................1pcs
.............1pcs
BP-PFANMFH
BPTA-DRGBMFC
CPU set
VGA set
Reservoir set
(See following details)
(See following details)
(See following details)
1
Bitspower reserves the right to change the product design and
interpretations. These are subject to change without notice. Product
colors and accessories are based on the actual product.
English
BPTA-O11DTE-V2-HI Installation Guide
A
B
C
D
E
A B
CD
E
F
F-1
F
F-1
F-2
F-2
F-3
F-4
F-6
F-7
F-8
F-9
................4 pcs
BPTA-F06
F-10
F-3 F-4
F-5 F-6
F-7 F-8
F-9
(Included in )
A
(Included in )
A
(Included in )
A
G
.................1pcs
TUBE set
G-1
G-2
G-3
G-4
G-5
G-6
G-1
G-2
(See following details)
F-10
................1 pcs
BPTA-F61
F-5
Ⅰ.Motherboard system
Accessory
G
CPU set
G-4
SCM3FL20
SPRING
SCM3F6
1mm Spacer
Back Pad
Paste Pad
Metal Backplane
M3x32mm Screw
.........................4pcs
.............................4pcs
.............................4pcs
.......................8pcs
...........................1pcs
..........................1pcs
.................1pcs
.............4pcs
Installation 1
2
Accessory
G
Installation 2
SCM3FL20
SPRING
SCM4M3
1mm Spacer
CPU set
G-4
...............................4pcs
...................................4pcs
..................................4pcs
.............................4pcs
F-1
F-2
F-7
Use an appropriate amount
of thermal paste.
Motherboard
C
F-1
F-2
F-7
Installation 1
F-1
F-2
F-7
C
F-1
F-2
F-7
Use an appropriate amount
of thermal paste.
Motherboard
Installation 2
Ⅱ.360 Radiator
F-1
F-1
F-2
F-2
F-6
F-6
F-4
F-4
B
D
BPTA-NLSS360-F2PB
B
M4x30mm Screw ...........12pcs
Ⅲ.BPTA-O11DTE-V2
F-9
F-10
F-1
F-10
F-1
F-8
3
Digital RGB PIN on motherboard or other equipment.
BPTA-DRGBMFC
G-2
Motherboard DRGB Multi Function Controller
A Negative electrode -
B positive electrode +
C Speed signal
A B C D
P1M Pump Spec.
Rated voltage:12V DC
Input Current : 0.50±10% A
Maximum flow:6.0±15% L/Min
Noise:26 dBA
Maximum system temperature:70℃
MTBF:15,000 hours
F-1
F-10
F-2
F-3
BPTASI-VG2080RD
E
F-1
F-10
F-2
F-5
Digital RGB PIN on motherboard or other equipment.
BPTA-DRGBMFC
G-2
Motherboard DRGB Multi Function Controller
1.0mm Thermal pad
M2.5×6mm Screw
Booster Screw
BPTASI-VG2080RD
E
M3×8mm Screw
M2.5×6mm Screw
Bitspower baffle
4
Accessory
G
VGA set
G-5
1.0mm Thermal pad
2.5mm Thermal pad
Booster Screw
M2.5×6mm Screw
M3×8mm Screw
Nut
Bitspower baffle
...........5pcs
...........1pcs
....................1pcs
............16pcs
.................4pcs
.....................................1pcs
.................1pcs
Ⅳ.BPTASI-VG2080RD
5
NVIDIA GEFORCE RTX 2080Ti
Using appropriate amount of thermal paste.
1 mm Thermal pad
2.5 mm Thermal pad
Applying the thermal pad and thermal paste on correct positions.
Before filling in the water, please make sure all the components are installed correctly.
To prevent any leakage which may damage the PC components, please perform a
24-hour leaking test with only the pump connected to the power supply .
NVIDIA GEFORCE RTX 2080 / 2070 SUPER / 2080 SUPER
6
Ⅴ.Installation process
Disassemble side glass panel / backplate /
control panel / top cover .. etc Install .motherboard system
Install .360 radiator
Install .
BPTA-O11DTE-V2
Install .BPTASI-VG2080RD
7
G-3-1
G-3-2
G-3-3
G-3-4
G-3-5
Accessory
G
TUBE set
G-3
G-3-1
G-3-2 G-3-3
G-3-3 G-3-4
G-3-5
The allowable tolerance of tube length is ± 2mm
The set applicable the motherboards:
Rog Strix Z390-E Gaming
Rog M11H Z390
Prime Z390-A
Z390 Aorus Pro WiFi (The changed to 191×111 mm)
8
G-3-3
BPTA-EXAIR
It is recommended to
install the air-exhaust
fitting on the reservoir,
above the water line.
Step 1
Press the button to
release the air.
BPTA-EFW
It is recommended to install the water-exhaust
fitting at the lowest point of the water cooling
system.
Step 1
Unscrew the top of the water-exhaust fitting.
Step 2
Replace with the water-exhaust part. When
screwing in the part, water will start to
discharge, it is recommended to connect
tubing beforehand to control the water outflow.
Installation
Installation
BPTA-EXAIR
BPTA-EFW
F-8 F-9
9
Water filling hole
Notice : Bitspower recommends that consumers add the Bitspower coolant or
purified water for their water-cooling liquid. If the consumer chooses
different water-cooling liquids , the resulting impurities may cause
peeling of the coating on some of the hardware, water channels block-
age by built-up residue, improper operation of the water pump, water
tank tube breakage, and o-rings deformation leading to leakage. Any
issues related to the use of inappropriate water-cooling liquid will be
the responsibility of the consumer.
Do not turn on the pump if the reservoir is empty.
Reinstalled side glass panel /
backplate / control panel / top
cover .. etc
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Bitspower BPTA-O11DTE-V2-HI Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI