Black & Decker CHS600 User manual

Black & Decker
Brand
Black & Decker
Model
CHS600
Category
Circular saws
Type
User manual
FUNCTIONAL
DESCRIPTION - Figure A
1.
On/off switch
2.
Lock-off button
3.
Charging socket
4.
Shoe
5. Blade clamp release lever
6. Charger
7. Wall mounting bracket
8. Saw blade storage
9. LED Charging Indicator
1
2
3
4
5
A
6
7
8
9
B C
D
10
3
7
10
ASSEMBLY
HANGING THE WALL MOUNTING BRACKET
Use the hardware provided only if hanging on conventional hollow wall construction such
as sheet rock or plaster walls. If not hanging on conventional sheet rock or plaster walls,
please use the appropriate fasteners for that material.
• Locate the charging base within reach of an electrical outlet.
• Mark the position of both hang holes.
• Drill appropriate sized holes.
• Insert supplied hardware through hang holes and attach bracket to wall. Check to see
that
the charging base is firmly attached to the wall so it will not pull out.
• Plug in and place the product in position.
NOTE: Avoid damaging the cord while fixing the mounting bracket to the wall.
ADDENDUM TO CHS600-XE INSTRUCTIONS FOR AUSTRALIA AND NEW ZEALAND ONLY
Charging base use and wall mounting.
New Zealand
Black & Decker
5 Te Apunga Place
Mt. Wellington.
Auckland 1060
Tel. +64 9 259 1111
Fax. +64 9 259 1122
Page 1 of 1
Sheet Number
  • Page 1 1

Black & Decker CHS600 User manual

Black & Decker
Brand
Black & Decker
Model
CHS600
Category
Circular saws
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents